Exploiting the bead injection concept for sequential determination of copper and mercury ions in river-water samples

A procedure involving bead-injection concept and sequential determination of copper and mercury ions in river-water samples is proposed. The method is based on the solid-phase extraction of both metal ions on the same beads surface (Chelex 100 resin) and in their subsequent reaction with the colorimetric reagents (APDC and Dithizone for copper and mercury ions, respectively). For this task, a resin mini-column is established in the optical path by the selection, introduction and trapping of a defined volume of the Chelex-100 resin beads suspension in the flow system. The passage of the sample solution through the resin mini-column promotes the sorption of Cu(II) ions and, making the APDC colorimetric reagent flows through the beads, the formation of the coloured complex on the solid phase surface occurs. The absorbance of the formed APDC-Cu complex is then monitored at 436 nm and the spent beads are discarded. Packing another resin mini-column in the flow cell and repeating the concentration step it is possible to carried out the mercury determination by using Dithizone as reagent. The absorbance of the Dithizone-Hg complex is monitored at 500 nm. After each measurement, the spent beads are wasted and a new portion of fresh one is trapped in the system, letting it ready for the next measurement. The bead injection system is versatile and can be used to concentrate different sample volumes, which permits the determination of a wide range of copper and mercury ions concentrations. When the sample-selected volumes are 100 and 1000 μl the analytical ranges were 5.0 up to 500.0 μg l⁻¹ and 2.5 up to 30.0 μg l⁻¹ for Cu(II) and Hg(II) ions, respectively. Under these conditions, the detection limit was estimated as 0.63 and 0.25 μg l⁻¹ for copper and mercury ions determination. The system consumes 2 mg of Chelex 100 resin beads, 0.20 mg of APDC or 1.25 mg of Dithizone per determination and the traditional organic solvent extraction methodology, normally used in connection with APDC and Dithizone reagents, is not used here which permits to classify the present method as green.     

Magnon excitation by spin injection in thin Fe/Cr/Fe films

The technique of Brillouin light scattering is used to observe strong excitation of magnons in antiferromagnetically coupled trilayers of Fe/Cr/Fe at room temperature. The magnons are driven out of equilibrium by a microwave current applied in the trilayer through point contacts. The magnitude of the scattering intensity is investigated as a function of the magnon wave number and applied magnetic field. Confirming recent theoretical predictions, the observations provide strong evidence of electronic spin injection in the rf driving field.     

Characterization of βN-Octadecanoyl-5-hydroxytryptamide Anti-Inflammatory Effect

Background: N-octadecanoyl-5-hydroxytryptamide (C₁₈-5HT) is an amide that can be obtained by the coupling of serotonin and octadecanoic acid. This study aims to characterize the in vivo and in vitro anti-inflammatory activity of C₁₈-5HT. Methods: A subcutaneous air pouch model (SAP) was used. The exudates were collected from SAP after carrageenan injection to assess cell migration and inflammatory mediators production. RAW 264.7 cells were used for in vitro assays. Results: C₁₈-5HT significantly inhibited leukocyte migration into the SAP as well as nitric oxide (NO) and cytokines production and protein extravasation. We also observed an reduction in some cytokines and an increase in IL-10 production. Assays conducted with RAW 264.7 cells indicated that C₁₈-5HT inhibited NO and cytokine produced. Conclusions: Taken together, our data suggest that C₁₈-5HT presents a significant effect in different cell types (leukocytes collected from exudate, mainly polumorphonuclear leukocytes and cell culture macrophages) and is a promising compound for further studies for the development of a new anti-inflammatory drug.     

Simultaneous Production of Amyloglucosidase and Exo-Polygalacturonase by <Emphasis Type="Italic">Aspergillus niger</Emphasis> in a Rotating Drum Reactor

Simultaneous production of amyloglucosidase (AMG) and exo-polygalacturonase (exo-PG) was carried out by Aspergillus niger in substrate of defatted rice bran in a rotating drum bioreactor (RDB) and studied by a 3¹ × 2² factorial experimental design. Variables under study were A. niger strains (A. niger NRRL 3122 and A. niger t0005/007-2), types of inoculum (spore suspension and fermented bran), and types of inducer (starch, pectin, and a mix of both). Solid-state fermentation process (SSF) was conducted at 30 °C under 60-vvm aeration for 96 h in a pilot scale. Production of AMG and exo-PG was significantly affected by the fungal strain and the type of inoculum, but inducers did not trigger any significant effect, an evidence of the fact that these enzymes are constitutive. The maximum activity of exo-PG was 84 U g_dm ^?1 whereas the maximum yield of AMG was 886.25 U g_dm ^?1.     

Voltammetric Determination of Folic Acid Using a Graphite Paste Electrode

A simple differential pulse voltammetric method based on a graphite paste electrode (GPE) was developed for the quantitative determination of folic acid (FA) in tablets. The electrode exhibits a clear improvement of the current response. A linear response in the electroanalytical approach exists from 4.97×10^?6 to 2.94×10^?5 mol L^?1 with a limit of detection of about 2.67×10^?6 mol L^?1 in KCl solutions. The developed procedure was tested by recovery studies and compared with spectrophotometric and chromatographic methods. The results are described and discussed in the light of existing literature.     

Acuminatanol, the first 2′,2?-bis-dihydrobiflavonol from the aqueous extract of Trichoscypha acuminata

One new 3′,4′,5′,5,7-pentahydroxy-2′,2?-bis-dihydrobiflavonol, acuminatanol (1), was obtained from the aqueous extract of Trichoscypha acuminata. The structure elucidation process was performed primarily utilizing a capillary scale NMR probe. Acuminatanol (1) is the first example of a bis-dihydroflavonol linked exclusively via the B-rings at C-2′ and C-2? positions. To date, it is the first naturally-occurring compound reported from the genus Trichoscypha, and the first new natural product published from our compound libraries generated from the aqueous extracts of American and African plants.     

Characterization of (NH3)(n=1-6)NH+ clusters produced by 252Cf fragments impact onto a NH3 condensed target

This paper reports the first characterization of the (NH(3))(n)NH+ cluster series produced by a 252Cf fission fragments (FF) impact onto a NH(3) ice target. The (NH(3))(n=1-6)NH+ members of this series have been analyzed theoretically and experimentally. Their ion desorption yields show an exponential dependence of the cluster population on its mass, presenting a relative higher abundance at n = 5. The results of DFT/B3LYP calculations show that two main series of ammonium clusters may be formed. Both series follow a clear pattern: each additional NH(3) group makes a new hydrogen bond with one of the hydrogen atoms of the respective {NH(3)NH}+ and {NH(2)NH(2)}+ cores. The energy analysis (i.e., D-plot and stability analysis) shows that the calculated members of the (NH(3))(n-1){NH(2)NH(2)}+ series are more stable than those of the (NH(3))(n-1){NH(3)NH}+ series. The trend on the relative stability of the members of more stable series, (NH(3))(n-1){NH(2)NH(2)}+, shows excellent agreement with the experimental distribution of cluster abundances. In particular, the (NH(3))4{NH(2)NH(2)}+ structure is the most stable one, in agreement with the experiments.