Synthesis of a model system for the preparation of phloroglucinol containing natural products

A model system for the synthesis of phloroglucinol containing natural products was synthesized. Key steps include a manganic acetate-mediated cyclization and the facile conversion of an alkene into a β-bromoenone.     

Solid-phase synthesis of a tyrphostin ether library

The solid-phase synthesis of a 4500-member (30 x 15 x 10) tyrphostin library is demonstrated utilizing the Irori-directed sorting system. Fmoc-protected PL-Rink resin was used as the solid support. After Fmoc-deprotection, aryl aldehydes were attached to the resin through reductive amination. Acylation of the resulting secondary amines with cyanoacetic acid was followed by a Knoevenagel condensation with phenolic aldehydes. Mitsunobu coupling of primary alcohols to the resin-bound phenols yielded the final library of compounds 1.     

Di­chloro­bis(1‐propyl­imidazolidine‐2‐thione‐κS)­cobalt(II)

The crystal structure of the title compound, [CoCl₂(C₆H₁₂N₂S)₂], consists of monomer units of a Co^II atom coordinated to two 1‐propyl­imidazolidine‐2‐thione ligands and to two chloride ions. The heterocyclic thione ligand is monodentate and coordinated to the metal through the thione S atom. The environment around the Co^II atom is a slightly distorted tetrahedron. The Co—S bond lengths are 2.341 (2) and 2.330 (2) Å, and the Co—Cl bond lengths are 2.234 (2) and 2.238 (2) Å. The most important point of distortion is the S—Co—S bond angle of only 97.83 (8)°. Intramolecular classical hydrogen bonds are found between the chloride ions and the N—H groups. Additionally, intra‐ and intermolecular non‐classical hydrogen bonds are found.     

Nucleophilic de-coordination and electrophilic regeneration of "hemilabile" pincer-type complexes: formation of anionic dialkyl, diaryl, and dihydride Pt(II) complexes bearing no stabilizing pi-acceptors

Novel anionic dialkyl, diaryl, and dihydride platinum(II) complexes based on the new "long-arm" hemilabile PCN-type ligand C6H4[CH2P(tBu)2](CH2)2N(CH3)2 with the general formula Li+[Pt(PCN)(R)2]- (R=Me (4), Ph (6) and H (9)) were prepared by reaction of [Pt(PCN)(R)] complexes (obtained from the corresponding chlorides) with an equivalent of RLi, as a result of the opening of the chelate ring. Alkylating agents based on other metals produce less stable products. These anionic d8 complexes are thermally stable although they bear no stabilizing pi acceptors. They were characterized by 1H, 31P[1H], 13C, and 7Li NMR spectroscopy; complex 9 was also characterized by single crystal X-ray crystallography, showing that the Li+ ion is coordinated to the nitrogen atom of the open amine arm and to the hydride ligand (trans to the P atom) of a neighboring molecule (H--Li=2.15 A), resulting in a dimeric structure. Complexes 4 and 9 exhibit high nucleophilic reactivity, upon which the pincer complex is regenerated. Reaction of 4 with water, methyl iodide, and iodobenzene resulted in the neutral complex [Pt(PCN)(CH3)] (3) and methane, ethane, or toluene, respectively. Labeling studies indicate that the reaction proceeds by direct electrophilic attack on the metal center, rather than attack on the alkyl ligand. The anionic dihydride complex 9 reacted with water and methyl iodide to yield [Pt(PCN)(H)] (8) and H2 or methane, respectively.     

Characterization of three agave species by gas chromatography and solid-phase microextraction-gas chromatography-mass spectrometry

Steam distillation (SD) extraction-solid-phase microextraction coupled to GC-MS was developed for the determination of terpenes and Bligh-Dyer extraction-derivatization coupled with GC for the determination of fatty acids such as ethyl esters were used. It was found that the three different Agave species have the same profile of fatty acids; the quantity of these compounds is different in each Agave variety. On the other hand, different terpenes were identified in the three Agave plants studied: nine in A. salmiana, eight in A. angustifolia and 32 in A. tequilana Weber var. azul.     

Studying dispersoid systems

Summary Measurements of energy transformation in mitochondria are done on a capillary differential titration calorimeter CTD2156. It is important to mention that a sediment is quickly formed by the mitochondria suspension without mixing by means of a vibrating needle. During the measurements, the vibrating needle is located inside the working volume of the chamber. The design of the calorimeter is substantiated theoretically. It provides a new mode of a reagent input in the measuring volume of the calorimetric chambers. It expands the spectrum of tasks that can be solved using this instrument. In the capillary calorimeter the calorimetric chambers unit is simple and small in size. These advantages of capillary chambers provide an opportunity to unite 20 capillary calorimetric chambers in one calorimetric block. It allows designing a multi-channel titration calorimeter. There are obvious advantages of such a calorimeter over other instruments in screening researches and in researches of objects maintaining stability only for a short time.     

Weighted bounds for the carleson maximal operator inR n

The Carleson maximal operator is shown to be bounded inL ^p (w) for certain values ofp and certain radial weightsw when acting on products of radial functions and homogeneous harmonic polynomials. Partially supported by DGICYT (MEC Spain). PB 92/187.     

Thermodynamics of alpha-Cyclodextrin-p-Nitrophenyl Glycoside Complexes. A Simple System To Understand the Energetics of Carbohydrate Interactions in Water

Thermodynamic studies of the binding of a series of p-nitrophenyl glycosides (PNPGly) of varying stereochemistry to alpha-cyclodextrin (alpha-CD) were performed at three different temperatures (25, 35, and 42 degrees C) using a microcalorimetric technique. The system p-nitrophenol (PNP) at pH = 3 and alpha-CD was also studied for the sake of comparison. All these complexes were found to be enthalpy driven with a favorable enthalpic term clearly dominant over an unfavorable entropic term. A clear enthalpy-entropy compensation effect was observed at all the temperatures, with a slope close to unity (alpha = 1.02) and an intercept TDeltaS degrees (o) = 2.91 kcal mol(-)(1). This thermodynamic pattern is in agreement with those usually found for lectin-carbohydrate associations and for the binding processes of several host-guest systems. This pattern is explained in terms of the contribution of primarily two driving forces: the van der Waals interactions between the host and the guest, and the solvation/desolvation processes which accompany the association reaction. The presence of the carbohydrate molecule in the PNP ring causes a slight destabilization of the complex at 25 degrees C with respect to the alpha-CD-PNP (pH = 3) complex, although a different behavior has been observed depending on the axial/equatorial configuration of the glycoside and the temperature. This behavior is modulated by the stereochemistry of the glycoside. Differences were observed between the deoxy-derivatives (LAra and LFuc) and those derivatives with a hydroxymethyl group (Glc, Gal, Man). DeltaC(p) degrees values were obtained from the dependency of DeltaH degrees on temperature (=( partial differentialDeltaH degrees / partial differentialT)(p)). These values are small and negative except for alphaMan complex. For the latter complex, discrepancy between the calorimetric and the calculated van't Hoff enthalpies was observed. Parallels are drawn between the thermodynamics of our model and those proposed for carbohydrate-protein associations.     

Metal-containing ditopic receptors for molecular recognition of diammonium cations

Two new ditopic receptors for α,ω-alkanediyldiammonium cations based on a tetraazamacrocyclic (cyclidene) nickel(II) complex bearing two crown-ether residues were synthesized. The studies of the host-guest interaction between the receptors and a series of α,ω-diammonium salts by NMR titration in acetonitrile-d₃ showed that 1:1 complexes are formed with K_assoc∼10³-10⁵ M⁻¹. Receptor 1 with benzo-15-crown-5 arms showed substantial selectivity in binding of trimethylene- and tetramethylenediammonium dications, and 1-2 orders of magnitude weaker binding of shorter (C₂) or longer (C₅ and C₆) diammonium cations. Receptor 2 with benzo-18-crown-6 arms showed higher affinity to all studied diammonium cations, but the recognition of the length of α,ω-diammonium cations was less pronounced.     

Development and validation of a liquid chromatography-ultraviolet absorbance detection assay using derivatisation for the novel marine anticancer agent ES-285 x HCl [(2S,3R)-2-amino-3-octadecanol hydrochloride] and its pharmaceutical dosage form

ES-285 x HCl [(2S,3R)-2-amino-3-octadecanol hydrochloride] is a novel investigational anticancer agent, which has shown in vitro and in vivo cytotoxic activity against various tumor cell lines with selectivity for certain solid tumors. The pharmaceutical development of ES-285 x HCl warranted the availability of an assay for the quantification and purity determination of ES-285 x HCl active pharmaceutical ingredient (API) and its pharmaceutical dosage form. A liquid chromatographic method (LC) comprising of derivatisation of ES-285 x HCl with phenylisothiocyanate and UV-detection was developed. The method was found to be linear, precise and accurate. The assay also proved selectivity as determined by analysing ES-285 x HCl in combination with 15 analogues and in combination with hydroxypropyl-beta-cyclodextrin, the excipient used in the lyophilised pharmaceutical dosage form. Stress testing showed that the degradation products were separated from the parent compound, confirming its stability indicating capacity. The method was found robust as determined with design of experiments (DoE), which made it possible to predict system suitability responses in worst case experimental conditions and to define criteria for system suitability testing.