Influence of acidic ionic liquids as an electrolyte additive on the electrochemical and corrosion behaviors of lead-acid battery

The aim of this study is to introduce the application of some acidic ionic liquids (ILs) as an electrolyte additive in lead-acid batteries. A family of alkylammonium hydrogen sulfate ILs, which are different in the number of alkyl chain, is investigated with the aim to compare their effects on the electrochemical behavior of Pb–Sb–Sn alloy in sulfuric acid solution. The hydrogen and oxygen gas evolution potential and anodic layer characteristics were investigated employing cyclic and linear sweep voltammetric methods. The morphological changes of the PbSO₄ layer that formed on the electrode surface were confirmed using scanning electron microscopy. Also, potentiodynamic polarization curves, electrochemical impedance spectroscopy, and an equivalent circuit analysis were used to evaluate the corrosion behaviors of the Pb–Sb–Sn alloy in the presence of ILs. The obtained results indicate that hydrogen and oxygen evolution overpotential of lead–antimony–tin alloy increases in the solution containing IL and mainly depends on the number of alkyl chain in alkylammonium cation. It is clearly observed that the morphology of PbSO₄ layer changes under the influence of ILs. The corrosion studies show an increase in corrosion resistance of lead alloy in the presence of some ILs. Also, the electrochemical effects of ILs in conversion of PbSO₄ to PbO₂ and vice versa were investigated by carbon-PbO paste electrode. Cyclic voltammogram of carbon-PbO electrode shows that in the presence of ILs, oxidation and reduction peak currents increase, while reversibility decreases.     

ZrOCl2·8H2O as an efficient and recyclable catalyst for the clean synthesis of xanthenedione derivatives under solvent-free conditions

ZrOCl₂·8H₂O was found to be an efficient and recyclable catalyst for the reaction of aromatic aldehydes with dimedone to afford 1,8-dioxo-1,2,3,4,5,6,7,8-octahydroxanthenes under solvent-free conditions. Short reaction time, excellent yields and simple work-up are the advantages of this procedure. The interaction obtained from XRD studies was shown that the catalyst loses H₂O during the reaction but it did not affect catalytic activity of the catalyst and the catalyst could be reused several times.     

Improved measurement of polarization state in terahertz polarization spectroscopy

A calibration scheme is presented for improved polarization state measurement of terahertz pulses. In this scheme the polarization response of a two-contact terahertz photoconductive detector is accurately measured, and is used to correct for the impact of the nonidealities of the detector. Experimental results show excellent subdegree angular accuracy and at least 60% error reduction with this scheme.     

Solubility of bosentan in {propylene glycol + water} mixtures at various temperatures: experimental data and mathematical modelling

Solubility measurements were performed for bosentan (BST) in binary mixtures of propylene glycol (PG) and water at atmospheric pressure within the temperature range, T = 293.2 – 313.2 K by employing a shake-flask method. Generated solubility data were correlated with Jouyban-Acree-van’t Hoff model and the accuracies of the predicted solubilities and model performance were illustrated by mean relative deviations (MRD). Furthermore, the apparent thermodynamic properties of BST dissolving in all the mixed solvents were calculated, and the obtained results show that the dissolution process is endothermic. By using the inverse Kirkwood–Buff integrals, it was observed that BST is preferentially solvated by water in water-rich solvent mixtures and preferentially solvated by PG (as a cosolvent) in the composition range of 0.20 < x₁ < 1.00 at 298.2 K.     

以蛋壳为原料制备的纳米氧化钙用于高效催化合成吡喃并[4,3-b]吡喃(英文)

Nano-CaO was prepared by calcination of ball-milled chicken eggshell waste.This novel,bioactive,heterogeneous catalyst,which had high catalytic activity and reusability,was used in the green synthesis of pyrano[4,3-b]pyrans via condensation of various aromatic aldehydes,malononitrile,and 4-hydroxy-6-methyl-2H-pyran-2-one at 120 °C under solvent-free conditions.The reaction proceeded to completion within 5–45 min in 93%–98% yield.The nano-CaO was fully characterized by scanning electron microscopy,X-ray powder diffraction,infrared spectroscopy,X-ray fluorescence spectroscopy,and thermal gravimetric,surface area,and elemental analyses.     

Preparation and characterization of optically active and organosoluble poly(amide‐imide)s from polycondensation reaction of N,N′‐(4,4′‐sulphonediphthaloyl)‐bis‐L‐isoleucine diacid with aromatic diamines

3,3′,4,4′‐Diphenylsulfonetetracarboxylic dianhydride (1) was reacted with L ‐isoleucine (2) in acetic acid and the resulting imide‐acid (3) was obtained in high yield. The diacid chloride (4) was prepared from the diacid derivative (3) by reaction with thionyl chloride. The polycondensation reaction of diacid chloride (4) with several aromatic diamines such as 4,4′‐sulfonyldianiline (5a), 4,4′‐diaminodiphenyl methane (5b), 4,4′‐diaminodiphenylether (5c), p‐phenylenediamine (5d),m‐phenylenediamine (5e), 2,4‐diaminotoluene (5f) and 4,4′‐diaminobiphenyl (5g) was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% of radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.23 to 0.41 dl/g were obtained with high yield. All of the earlier polymers were fully characterized by IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Solubility of sildenafil citrate in propylene glycol + water mixtures at various temperatures

The solubility of sildenafil citrate (SC) in aqueous mixtures of propylene glycol (PG) was investigated. This study was carried out at different mass fractions of PG ranging from 0.1 to 0.9 at T = 293.2–313.2 K. The solubility of SC in the mixed solutions increased with increasing temperature and PG mass fraction.

The solubility values were correlated by two co-solvency models (Jouyban–Acree model and van’t Hoff–Jouyban–Acree model). The mean relative deviations (MRD) were 5.7% and 5.5%, respectively. Density of the SC-saturated solutions over the entire solvent composition and temperature range was also measured and the results correlated with the Jouyban–Acree model. Furthermore, the apparent thermodynamic properties, dissolution enthalpy, dissolution entropy and Gibbs free energy change of dissolution process of SC in all the mixed solvents were calculated according to van’t Hoff and Gibbs equations. Dissolution of SC in these mixed solvents is an endothermic process.     

A thermodynamic study of interaction of Ag+, Mg2+, Ca2+, and K+ cations with 4-hydroxyphenyl-2,5-bis(2-benzofuranyl)pyridine in some binary mixed non-aqueous solvents

In the present work the complexation process between Ag⁺ and Mg²⁺ cations and 4-hydroxyphenyl-2,5-bis(2-benzofuranyl)pyridine (HBFPY) ligand was studied in pure dimethylformamide (DMF), ethanol (EtOH), acetonitrile (AN) and in (DMF-EtOH), (AN-EtOH) and (DMF-AN) binary mixed solvent solutions at different temperatures using the conductometric method. Also in this work the complexation reaction between Ca²⁺, K⁺ cations and HBFPY ligand, was studied in pure dimethylformamide (DMF), propanol (PrOH), 1,4-dioxane (DOX), ethanol (EtOH) and in DMF-PrOH, DMF-DOX and DMF-EtOH binary mixed solvent solutions at different temperatures using the conductometric method. The conductance data show that the stoichiometry of the complexes formed between this ligand and the studied cations is 1 : 1 [ML]. In most cases, addition of HBFPY to solutions of these cations, causes a continuous increase in the molar conductivities which indicates that the mobility of complexed cations is more than the uncomplexed ones. The stability constants of the complexes were obtained from fitting of molar conductivity curves using a computer program, GENPLOT. The stability constant of [Mg(HBFPY)]²⁺ complex in various neat solvents at 15°C decreases in order: EtOH > DMF > AN and the stability constant of [Ag(HBFPY)]⁺ complex in various neat solvents at 35°C decreases in order: DMF > EtOH. The values of standard enthalpy changes (ΔH° _c ) for complexation reactions were obtained from the slope of the Van’t Hoff plots and the changes in standard entropy (ΔS° _c ) were calculated from the relationship ΔH° _c,295.15= ΔH° _c –298.15ΔS° _c .     

Graphitic carbon nitride embedded hydrogels for enhanced gel electrophoresis

Here, we show, for the first time, the use of graphitic carbon nitride (g-C₃N₄) nanosheets to improve the resolution and efficiency of protein separation in gel electrophoresis. By loading 0.04% (m/v) g-C₃N₄ nanosheets into the polyacrylamide gel at 25 °C, the thermal conductivity increased approximately 80% which resulted in 20% reduction in Joule heating and overall increase of separation efficiency. Also, polymerization of acrylamide occurred in the absence of tetramethylethylenediamine (TEMED) when the polyacrylamide gel contained g-C₃N₄ nanosheets. Hence, the g-C₃N₄ act simultaneously as a polymerization catalyst as well as heat sinks to lower Joule heating effect on band broadening.