SMFs-supported Pd nanocatalysts in selective acetylene hydrogenation: Pore structure-dependent deactivation mechanism

In the present study, CNFs, ZnO and Al₂O₃ were deposited on the SMFs panels to investigate the deactivation mechanism of Pd-based catalysts in selective acetylene hydrogenation reaction. The examined supports were characterized by SEM, NH₃-TPD and N₂ adsorption-desorption isotherms to indicate their intrinsic characteristics. Furthermore, in order to understand the mechanism of deactivation, the resulted green oil was characterized using FTIR and SIM DIS. FTIR results confirmed the presence of more unsaturated constituents and then, more branched hydrocarbons formed upon the reaction over alumina-supported catalyst in comparison with the ones supported on CNFs and ZnO, which in turn, could block the pores mouths. Besides the limited hydrogen transfer, N₂ adsorption-desorption isotherms results supported that the lowest pore diameters of Al₂O₃/SMFs close to the surface led to fast deactivation, compared with the other catalysts, especially at higher temperatures.     

Convenient N-Alkylation of amines using an effective magnetically separable supported ionic liquid containing an anionic polyoxometalate

Research on Chemical Intermediates - An effective synthesis of anion-exchanged supported ionic liquid using magnetically separable nanoparticles and its catalytic effect on N-alkylation reactions...     

Fabrication, characterization, and measurement of viscosity of α-Fe2O3-glycerol nanofluids

Magnetic nanofluids, ferrofluids, are a special category of smart nanomaterials, consisting of stable dispersion of magnetic nanoparticles in different fluids. In this study, magnetic nanoparticles of hematite, α-Fe₂O₃, were prepared by solvothermal method using Fe(NO₃)₃ as a starting material. The nanoparticles were characterized by X-ray diffraction (XRD) and transmission electronic microscope (TEM).To the best of our knowledge, this is the first research on the rheological properties of nanofluids of α-Fe₂O₃ nanoparticles and glycerol. The experimental results showed that the viscosity of α-Fe₂O₃-glycerol nanofluids increases with increasing the particle volume fraction and decreases with increasing temperature. Our results clearly showed that the α-Fe₂O₃-glycerol nanofluids are non-Newtonian shear-thinning and their shear viscosity depends strongly on temperature. The experimental data were compared with some theoretical models. The measured values of the effective viscosity of nanofluids are underestimated by the theoretical models.     

Synthesis of oxime phosphoranes from reaction between triphenylphosphine and acetylenic esters in the presence of oxime derivatives

A new one-pot, simple and effective procedure is presented for the preparation of O-containing phosphorus ylides by the Michael addition reaction of N-methylpyrrole-2-carbaldehydoxime, pyridin-2-carbaldehydoxime or acetophenonoxime with acetylenic esters.     

CoFe2O4 nano-particles functionalized with 8-hydroxyquinoline for dispersive solid-phase micro-extraction and direct fluorometric monitoring of aluminum in human serum and water samples

A simple dispersive solid-phase micro-extraction method based on CoFe₂O₄ nano-particles (NPs) functionalized with 8-hydroxyquinoline (8-HQ) with the aid of sodium dodecyl sulfate (SDS) was developed for separation of Al(III) ions from aqueous solutions. Al(III) ions are separated at pH 7 via complex formation with 8-HQ using the functionalized CoFe₂O₄ nano-particles sol solution as a dispersed solid-phase extractor. The separated analyte is directly quantified by a spectrofluorometric method at 370 nm excitation and 506 nm emission wavelengths. A comparison of the fluorescence of Al(III)–8-HQ complex in bulk solution and that of Al(III) ion interacted with 8-HQ/SDS/CoFe₂O₄ NPs revealed a nearly 5-fold improvement in intensity. The experimental factors influencing the separation and in situ monitoring of the analyte were optimized. Under these conditions, the calibration graph was linear in the range of 0.1–300 ng mL⁻¹ with a correlation coefficient of 0.9986. The limit of detection and limit of quantification were 0.03 ng mL⁻¹ and 0.10 ng mL⁻¹, respectively. The inter-day and intra-day relative standard deviations for six replicate determinations of 150 ng mL⁻¹ Al(III) ion were 2.8% and 1.7%, respectively. The method was successfully applied to direct determine Al(III) ion in various human serum and water samples.     

Magnetic Solid Phase Extraction Coupled with HPLC Towards Removal of Pigments and Impurities from Leaf-derived Paclitaxel Extractions of Taxus baccata and Optimization via Response Surface Methodology

A reusable and cost-effective magnetic graphite oxide (Fe₃O₄NPs@GO) nanocomposite was fabricated and applied for pre-purification of paclitaxel from leaf-derived crude extract of Taxus baccata. Furthermore, the potential roles of three crucial criteria (i.e., adsorbent dosage, sorption temperature and agitation/shaking power) on the two responses [i.e., efficiency of plant pigments removal (EPPR) and efficiency of taxol purity (ETP)] were examined and simultaneously optimized through response surface methodology. The nanocomposite was accurately characterized using TEM, AFM, BET, FT-IR, Raman and VSM. Moreover, for both proposed second-degree polynomial regression models, highly significant correlations were achieved between the experimental and predicted data (p < 0.0001). Meanwhile, the optimum conditions to simultaneously acquire the maximum EPPR (94.0 %) and ETP (11.4 %) were recorded as adsorbent dosage of 37.7 g L⁻¹, sorption temperature of 30.7 °C and agitation power of 153.1 rpm; and the predictive results were confirmed using experimental rechecking survey. Interestingly, upon five consecutive treatments, the nanocomposite still exhibited substantial potency in eliminating large amounts of plant pigments and impurities (up to 90 %), without significant reduction on sorption capacity and magnetism thereof. Our results demonstrated that the current nanocomposite, as SPE sorbent for MSPE, could be a simple, fast and reusable approach for HPLC-based purification studies of paclitaxel, and probably other plant secondary metabolites.

     

Magnetic CuO nanoparticles supported on graphene oxide as an efficient catalyst for A3-coupling synthesis of propargylamines

Magnetically separable CuO nanoparticles supported on graphene oxide (Fe₃O₄ NPs/GO-CuO NPs) is synthesized and characterized for the preparation of propargylamines in EtOH, at 90℃. Fe₃O₄ NPs/GO-CuO NPs is found to be an efficient catalyst for the A³-coupling of aldehydes, amines, and alkynes through C-H activation. Both aromatic and aliphatic aldehydes and alkynes are combined with secondary amines to provide a wide range of propargylamines in moderate to excellent yields.     

Development of a Novel Electrochemical Biosensor for Detection and Discrimination of DNA Sequence and Single Base Mutation in dsDNA Samples Based on PNA‐dsDNA Hybridization – a new Platform Technology

In spite of the extensive attention paid on the development of various DNA detection strategies, very few studies have been reported regarding direct detection of DNA sequence and mutation in dsDNA. Here, we describe the feasibility of detection and discrimination of target DNA sequences and single base mutations (SBM) directly in double‐stranded oligonucleotides and PCR products without the need for denaturation of the target dsDNA samples. This goal was achieved by employing a peptide nucleic acid (PNA) chain, self‐assembled on the gold electrode as a probe, which binds to dsDNA and forms PNA‐dsDNA hybrid.     

Injectable poloxamer/graphene oxide hydrogels with well‐controlled mechanical and rheological properties

Although significant progress has been made in the design and application of injectable hydrogels for biomedical applications, concurrent control of rheological and mechanical properties of injectable hydrogels has remained as an open challenge to the researchers. In this work, we introduce and put into practice a photo‐curable poloxamer (also known as Pluronic)/graphene oxide (Plu/GO) injectable hydrogel with well‐controlled rheological and mechanical properties. Acrylate group was anchored to hydrogel structure to endow photo‐crosslinking ability through decelerating degradation rate of poloxamer hydrogels after injection. It was found that the modified Plu remains stable in biological media for a long‐term period without significant weight loss. Rheological properties of hydrogels were also carried out as essential prerequisite for an ideal injectability via frequency sweep, flow curve, recovery, and yield stress before and after modification, signifying shear‐thinning behavior of Plu/GO hydrogels with high recoverability. The viscosity of shear‐thinning‐like hydrogels dropped at higher shear stress, which facilitated injection process. Moreover, mechanical behavior of Plu was optimized by manipulating the content of Plu, degree of modification with reactive precursor, curing, and particularly incorporation of GO without deteriorating effects on rheological behavior of Plu.