Optimization of SIMS analytical parameters for water content measurement of olivine

Secondary ion mass spectrometry (SIMS) has a wide range of applications in Earth Science research, thanks to its high precision and sensitivity, and its capacity in direct insitu micromeasurement. The technique is operated in ultra-high vacuum (UHV) conditions, especially for the measurement of volatiles such as hydrogen, or the water content in nominally anhydrous minerals (NAMs). To minimize the water background and obtain accurate and precise water contents in NAMs (eg, olivine) critical parameters such as presputtering time, field aperture (FA), dynamic transfer on/off, and primary beam current intensity were investigated for a CAMECA IMS 1280-HR system. When the chamber vacuum reaches approximately 2 × 10⁻⁹ mbar, we set the DTOS OFF, raster size to 50 μm and primary beam current to 5 nA, and used 2000 μm FA and 170-second presputtering time. Consequently, an approximately 1.2 ppmw water background and 3.6 ppmw limit of detection (LOD) were yielded, from analyzing the San Carlos olivine. Meanwhile, the water content and homogeneity of a range of olivine minerals were characterized for potential use as reference materials for SIMS water content measurement. Olivine water content calibration curve was also established by comparing the Fourier transform infrared (FTIR) results with the SIMS-measured ¹⁶O¹H⁻/¹⁶O⁻ ratios. Accuracy and precision of water content measurement were estimated to be better than approximately 10% in this study.     

Preparation of Ferrierite Zeolite Membranes in the Absence of Organic Structure-directing Agents

Zeolite membrane is an important category of inorganic membranes with many advantages such as thermal and chemical stability, high mechanical strength as well as the unique pore structure of molecular dimension. Up to now, many types of zeolite including …     

Virtual screening for ligands of the insect molting hormone receptor

Insect growth is regulated by the orchestrated event of ecdysteroids and their receptor proteins. Agonists/antagonists of ecdysteroid receptor are predicted to disrupt normal growth, providing good candidates of new insecticides. A database of over 2 million compounds was subjected to a shape-based virtual screening cascade to identify novel nonsteroidal hits similar to the known EcR ligand ponasterone A. Testing revealed micromolar hits against two strains of insect cells. Docking experiments against EcR were used to support the predicted binding mode of these ligands based on their overlay to ponasterone A.     

Selective flow-injection determination of methanol in the presence of ethanol based on a multi-enzyme system with chemiluminescence detection

A highly selective flow-injection system was developed for the determination of methanol. The system consisted of three immobilized enzymes with luminol chemiluminescence detection. First, methanol was oxidized in the presence of alcohol oxidase to yield formaldehyde and hydrogen peroxide. The hydrogen peroxide produced was then destroyed by catalase. The formaldehyde formed in the first stage was further oxidized by NAD⁺-formaldehyde dehydrogenase. The NADH formed was oxidized by 1-methoxy-5-methylphenazinium methylsulphate (1-MPMS), and finally the reduced 1-MPMS was spontaneously oxidized and hydrogen peroxide was produced. The concentration of the hydrogen peroxide produced, which was proportional to the initial concentration of methanol, was determined by luminol chemiluminescence. The determination range was from 0.1 to 100 mg l⁻¹ and the response time was less than 2 min per sample with a relative standard deviation of less than 3%. The system showed good selectivity for methanol; the response was ca. 50 times higher than for ethanol.     

A divergent synthesis of dihydropyridazinones,N‐substituted dihydropyrazoles,and O‐substituted pyrazoles

Dihydropyridazinones 4a , 4b , N‐substituted dihydropyrazoles 5b , 5c , 5d , and O‐substituted pyrazoles 6a , 6b , 6c , 6d have been synthesized starting from spirocyclopropanepyrazole derivative 2 . Treatment of 2 with α‐chloro esters, e.g., methyl chloroacetate, ethyl chloroacetate, isopropyl chloroacetate, and tert‐butyl chloroacetate, in potassium carbonate/sodium iodide system caused ring opening and subsequent C‐ or N‐attack nucleophilic substitution to give the corresponding dihydropyridazinones 4a , 4b and N‐substituted dihydropyrazoles 5b , 5c , 5d . On the other hand, in the absence of sodium iodide, O‐substituted pyrazoles 6a , 6b , 6c , 6d were obtained from 2 via an O‐attack nucleophilic substitution. J. Heterocyclic Chem., 2011.     

Electric field dependent photocurrent generation in a thin-film organic photovoltaic device with a [70]fullerene-benzodifuranone dyad

A [70]fullerene-benzodifuranone acceptor dyad synthesized by a Ag?-mediated coupling reaction was used to construct a thin-film organic solar cell. The fullerene and the benzodifuranone dye in the dyad have close-lying LUMO levels in the range of 3.7-3.9 eV, so that energy transfer from the dye to the fullerene can take place. A p-n heterojunction photovoltaic device consisting of a tetrabenzoporphyrin and a [70]fullerene-benzodifuranone dyad showed a weak but discernible contribution from light absorption of the dyad to the photocurrent under both a positive and a negative effective bias. These results indicate that the benzodifuranone moiety attached to the acceptor contributes to light-harvesting by energy transfer.     

Quantitative Detection for Porphyromonas gingivalis in Tooth Pocket and Saliva by Portable Electrochemical DNA Sensor Linked with PCR

Here, a quantitative electrochemical analysis of periodontal bacteria in gingival crevicular fluid (GCF) and saliva by direct polymerase chain reaction (PCR) is presented. The electrochemical measurement was performed by mixing with PCR products and electrochemical indicator (bisbenzimidazole trihydrochloride). The peak current of indicator is reduced due to slower diffusion when the dye intercalates into the amplified DNA, and the degree of reduction in the peak current is correlates with the quantity of amplified DNA. Therefore, a quantitative analysis is possible by using our electrochemical method at the end point of PCR. In the GCF testing, The number of Porphyromonas gingivalis (Pg) detected by our electrochemical method at the end point of PCR were almost same compared with that were calculated by the conventional method of quantitative real? time PCR. In the saliva testing, the relationship between number of Pg in saliva and average pocket depth, and age‐dependence were also clearly observed. Since the saliva sample is obtained in a non‐invasive manner, this method is useful for the primary screening of periodontal disease. Moreover, our detection method is simple and uses a hand‐held potentiostat making it suitable for development of an on‐site periodontal diagnosis system.     

Synthesis and structural, electrochemical, and stacking properties of conical molecules possessing buckyferrocene on the apex

A series of conical molecules featuring a [60]fullerene/ferrocene hybrid and five aralkyl side chains (Fe[C60{C6H4-(OCO-C6H3-(OR)2-3,4)-4}5]Cp) have been synthesized and examined for their structural and electrochemical properties as well as their ability to form supramolecular structures in crystals and liquid crystals. When the R group on the side is a methyl group, the compound forms crystals in which the dipolar conical molecules are stacked head-to-tail to form a columnar structure. When the R group is as long as a C18H38 group, the compound forms liquid crystals. Oxidation of the liquid crystalline compound by an aminium salt [(4-BrC6H4)3N][SbCl6] produces the corresponding paramagnetic Fe(III) compound that also exhibits liquid crystalline properties.