Uses and analyses of curtin-hammett/winstein-holness systems involving second order reactions

The Curtin-Hammett (C-H) principle and the Winstein-Holness (W-H) equation approximate the product ratio and overall rate constant of reaction for systems involving a starting material which exists in two forms, each of which reacts via first-order kinetics to give a different product. The C-H/W-H approximations are valid when the rates of isomer interconversion are significantly faster than the rates of product formation. The present treatment encompasses non-first-order reactions to product. A numerical predictor-corrector technique is used to show (1) that relative reagent concentration can affect both the product ratio and the observed rates of product formation; (2) that the absolute concentration of reagent and substrate can affect the kinetics; and (3) that factors (1) and (2) above can affect the validity of the C-H/W-H approximations for non-first-order C-H/W-H schemes.     

Combinatorial enantiomeric separation of diverse compounds using capillary array electrophoresis

Combinatorial chiral separations were performed on a 96-capillary array electrophoresis system. A comprehensive enantioseparation protocol employing neutral and sulfated cyclodextrins as chiral selectors for common basic, neutral and acidic compounds was developed. By using only four judiciously chosen separation buffers, successful enantioseparations were achieved for 49 out of 54 test compounds spanning a large variety of pK and structures. Therefore, unknown compounds can be screened in this manner to identify the optimal enantioselective conditions in just one run.     

Esmodil: an acetylcholine mimetic resurfaces in a Southern Australian marine sponge Raspailia (Raspailia) sp

Bioassay directed fractionation of a Raspailia (Raspailia) sp. (Order Poecilosclerida; Family Raspailiidae) collected during scientific trawling operations off the Northern Rottnest Shelf yielded as nematocidal agents the known metabolites, phorboxazoles A (1) and B (2). Further examination revealed the new natural product but known synthetic compound, esmodil (3). The structure for 3 was confirmed by spectroscopic analysis and total synthesis.     

Molecularly-imprinted polypyrrole-modified stainless steel frits for selective solid phase preconcentration of ochratoxin A

A molecularly-imprinted polymer (MIP) was prepared by electropolymerization of pyrrole (Py) onto a stainless steel frit, using ochratoxin A (OTA) as the template, in order to make a micro solid phase preconcentration (SPP) device. The OTA template was removed with 1% triethylamine (TEA) in methanol. Compared to non-imprinted polypyrrole (PPy), the molecularly-imprinted polypyrrole (MIPPy) enhanced the selective binding of OTA. The percentage recovery improved from 0 to 40% when the OTA sample solution was acidified with 1 M HCl (1% by volume). At a flow rate of 0.2 mL/min, maximum OTA binding was reached in 6 min after a total loading of 3.2 ng OTA. Final elution of the OTA was analyzed by high performance liquid chromatography (HPLC) with fluorescence detection, using 20:80 v/v acetonitrile–ammonia buffer (NH₄Cl/NH₃, 20 mM, pH 9.2) as the mobile phase. The MIPPy-SPP-HPLC results clearly demonstrated that the MIPPy-SPP device afforded selective preconcentration of OTA from red wine samples, at OTA concentration levels as low as 0.05 ppb, prior to HPLC analysis.     

Roxarsone and transformation products in chicken manure: determination by capillary electrophoresis-inductively coupled plasma-mass spectrometry

The determination of the animal feed additive roxarsone (3-nitro-4-hydroxyphenylarsonic acid) and six of its possible transformation products (arsenite, arsenate, monomethylarsonate, dimethylarsinate, 3-amino-4-hydroxyphenylarsonic acid, and 4-hydroxyphenylarsonic acid) in chicken manure was investigated using capillary electrophoresis-inductively coupled plasma-mass spectrometry (CE-ICP-MS). Initial method development was conducted using ultraviolet (UV) detection for ruggedness and time efficiency. Separation of these seven arsenic species was effected using a 20 mM phosphate buffer at pH 5.7. The CE-ICP-MS limits of detection in terms of As for each of the species was in the low microg.L(-1) range, corresponding to absolute detection limits in the range 20-70 fg As (based on a 23 nL injection). Overall, the method developed in this study provides high selectivity and low limits of detection (1-3 microg.L(-1) or low-ppb, based on As), uses small sample volume (low nL), and produces minimal wastes.     

Synthesis and optical properties of thiol-stabilized PbS nanocrystals

Thiol-capped water-soluble PbS nanocrystals (NCs) stabilized with 1-thioglycerol, dithioglycerol, or a mixture of 1-thioglycerol/dithioglycerol (TGL/DTG) were prepared via one-stage synthesis at room temperature. We found that NCs stabilized with a TGL/DTG mixture show efficient and stable infrared photoluminescence centered in the second "biological window" (1050-1200 nm). Under optimized conditions, full width at half-maximum of the PL emission peak was from 70 to 100 nm. PbS NCs were stable to precipitation and aggregation for the time period from 2 to 3 months when stored in the dark under room temperature. Room-temperature photoluminescence quantum efficiency of NCs was from 7 to 10%. When NCs were stored at 37 degrees C, their PL emission red-shifted, consistent with the NC growth.     

Thermodynamic equilibration of dihydropyridone enolates: application to the total synthesis of (+/−)-epiuleine

Following 1,4-reduction of 2-substituted dihydropyridones (1), the requisite ‘kinetic’ enolate can be isomerized upon warming to allow the isolation of the thermodynamic enolate as its vinyl triflate (3). This enolate interconversion is dependent on the dihydropyridone C-2 substituent and can be interpreted in terms of conformational analysis. This novel scaffold (3) opens another avenue for the strategic deployment of dihydropyridones into both natural product synthesis and drug discovery. To this end, this method is highlighted by its use as a key step in a total synthesis of (+/−) epiuleine (14).     

Isomolar semigrand ensemble molecular dynamics: development and application to liquid-liquid equilibria

An extended system molecular dynamics method for the isomolar semigrand ensemble (fixed number of particles, pressure, temperature, and fugacity fraction) is developed and applied to the calculation of liquid-liquid equilibria (LLE) for two Lennard-Jones mixtures. The method utilizes an extended system variable to dynamically control the fugacity fraction xi of the mixture by gradually transforming the identity of particles in the system. Two approaches are used to compute coexistence points. The first approach uses multiple-histogram reweighting techniques to determine the coexistence xi and compositions of each phase at temperatures near the upper critical solution temperature. The second approach, useful for cases in which there is no critical solution temperature, is based on principles of small system thermodynamics. In this case a coexistence point is found by running N-P-T-xi simulations at a common temperature and pressure and varying the fugacity fraction to map out the difference in chemical potential between the two species A and B (mu(A)-mu(B)) as a function of composition. Once this curve is known the equal-distance/equal-area criterion is used to determine the coexistence point. Both approaches give results that are comparable to those of previous Monte Carlo (MC) simulations. By formulating this approach in a molecular dynamics framework, it should be easier to compute the LLE of complex molecules whose intramolecular degrees of freedom are often difficult to properly sample with MC techniques.     

Metal complexes in the catalytic reactions of olefins. 1. Comparison of the catalytic properties of triphenylphosphine nickel complexes both individually and heterogenized on Al2O3 in the dimerization of ethylene

Conclusions By studying the liquid-phase dimerization of ethylene in the presence of Cat-Et₃Al₂-Cl₃ catalytic systems based on a nickel complex heterogenized on Al₂O₃ and a number of model nickel complexes, a similar activity and selectivity of the process has been established (Cat=NiPPh₃(CO)₂L, where L=PPh₃, CO, Al₂O₃; Ni(PPh₃)₂(CO)₂; Ni(PPh₃)₂(₂-C₂H₄); Ni[P(C₆H₁₁)₃]₂(H)Cl and Ni(PPh₃)(Et)Cl).The results of the investigation agree with the hypothesis that mono- and diolefinic nickel complexes are formed as the active intermediates in the reaction.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2466–2469, November, 1988.     

Electron impact and chemical ionization mass spectra of alkyldiphenylphosphine oxides

In the 70 e V electron impact mass spectra of a series of alkyldiphenylphosphine oxides (R?₂PO, R = Me, Et, n-Pr, i-Pr, n-Bu, i-Bu, t-Bu, neopentyl, n-decyl), molecular ions of low abundance are observed and [M + H]⁺ ions are formed to a small extent at high sample pressures. The major ions include [?₂PO]⁺, [?₂POH]⁺; [?₂CH₂PO]⁺ and [?₂CH₂POH]⁺ which are formed by rearrangement and cleavage processes. The chemical ionization mass spectra obtained with methane and isobutane reagents consist of [M + H]⁺ ions. The proton affinity of R?₂PO was found to be 219 ± 2.5 kcal mol^?1.