Electrostatic layer-by-layer deposition and electrochemical characterization of thin films composed of MnO2 nanoparticles in a room-temperature ionic liquid

Thin films of MnO(2) nanoparticles were grown using the layer-by-layer method with poly(diallyldimetylammonium) as the intercalated layer. The film growth was followed by UV-vis, electrochemical quartz crystal microbalance (EQCM), and atomic force microscopy. Linear growth due to electrostatic immobilization of layers was observed up to 30 bilayers, but electrical connectivity was maintained only for 12 MnO(2)/PPDA bilayers. The electrochemical characterization of this film in 1-butyl-2,3-dimethyl-imidazolium (BMMI) bis(trifluoromethanesulfonyl)imide (TFSI) (BMMITFSI) with and without addition of a lithium salt indicated a higher electrochemical response of the nanostructured electrode in the lithium-containing electrolyte. On the basis of EQCM experiments, it was possible to confirm that the charge compensation process is achieved mainly by the TFSI anion at short times (<2 s) and by BMMI and lithium cations at longer times. The fact that large ions like TFSI and BMMI participate in the electroneutrality is attributed to the redox reaction that occurs at the superficial sites and to the high concentration of these species compared to that of lithium cations.     

Generalized Benders’ Decomposition for topology optimization problems

This article considers the non-linear mixed 0–1 optimization problems that appear in topology optimization of load carrying structures. The main objective is to present a Generalized Benders’ Decomposition (GBD) method for solving single and multiple load minimum compliance (maximum stiffness) problems with discrete design variables to global optimality. We present the theoretical aspects of the method, including a proof of finite convergence and conditions for obtaining global optimal solutions. The method is also linked to, and compared with, an Outer-Approximation approach and a mixed 0–1 semi definite programming formulation of the considered problem. Several ways to accelerate the method are suggested and an implementation is described. Finally, a set of truss topology optimization problems are numerically solved to global optimality.     

Internal standard in flow injection analysis with amperometric detection

In this work, we describe for the first time the use of the internal standard method in flow injection analysis (FIA) with amperometric detection. The method is based on the application of sequential potential pulses to the working electrode in an electrochemical flow cell. The sequence of potential pulses is selected in such a way that the analyte and internal standard compound are detected and monitored individually and independently at the same working electrode. This approach compensates for random errors associated with variations of flow rate, injection volume, ionic strength difference between standards and samples, and accidental insertion or formation of air bubbles in the carrier stream. In addition, this method can overcome the major drawback of amperometric detection using solid electrodes, which is gradual electrode passivation. To illustrate the potential of this method, the flow-injection amperometric detection of uric acid using [Fe(CN)₆]^3? as an internal standard (IS) is presented as an example.     

Spin-glass energy landscape

We consider a nearest-neighbor-interaction ±J Ising spin glass in a square lattice. Inspired by natural evolution, we design a dynamic rule that includesselection, randomness, andmultibranch exploration. Following this rule, we succeed in walking along the space of states between local energy maxima and minima alternately. During the walk, we store various information about the spin states corresponding to these minima and maxima for later statistical analysis. In particular, we plot a histogram displaying how many times each minimum (or maximum) energy is visited as a function of the corresponding density value. Through finite-size scaling analysis, we conclude that a nonvanishing fraction of bonds remains unsatisfied (satisfied) at these energy minimum (maximum) states in the thermodynamic limit. This fraction measures the degree of unavoidable frustration of the system. Also in this limit, the width of these histograms vanishes, meaning that almost all metastable states occur at the same energy density value, with no dispersion.     

Two Cu(I) complexes based on semicarbazone ligand: synthesis,crystal structure,Hirshfeld surface and anticancer activity evaluation against human cell lines

Structural Chemistry - Two novel Cu(I) complexes with the 2-acetylpyridine-N(4)-phenyl semicarbazone (HL) ligand, [CuCl (HL)(PPh3)]∙CH3CN (1) and [CuBr (HL)(PPh3)] (2), were investigated by...     

Lemon Oils Attenuate the Pathogenicity of Pseudomonas aeruginosa by Quorum Sensing Inhibition

The chemical composition of three Citrus limon oils: lemon essential oil (LEO), lemon terpenes (LT) and lemon essence (LE), and their influence in the virulence factors production and motility (swarming and swimming) of two Pseudomonas aeruginosa strains (ATCC 27853 and a multidrug-resistant HT5) were investigated. The main compound, limonene, was also tested in biological assays. Eighty-four compounds, accounting for a relative peak area of 99.23%, 98.58% and 99.64%, were identified by GC/MS. Limonene (59–60%), γ-terpinene (10–11%) and β-pinene (7–15%) were the main compounds. All lemon oils inhibited specific biofilm production and bacterial metabolic activities into biofilm in a dose-dependent manner (20–65%, in the range of 0.1–4 mg mL⁻¹) of both strains. Besides, all samples inhibited about 50% of the elastase activity at 0.1 mg mL⁻¹. Pyocyanin biosynthesis decreases until 64% (0.1–4 mg mL⁻¹) for both strains. Swarming motility of P. aeruginosa ATCC 27853 was completely inhibited by 2 mg mL⁻¹ of lemon oils. Furthermore, a decrease (29–55%, 0.1–4 mg mL⁻¹) in the synthesis of Quorum sensing (QS) signals was observed. The oils showed higher biological activities than limonene. Hence, their ability to control the biofilm of P. aeruginosa and reduce the production of virulence factors regulated by QS makes lemon oils good candidates to be applied as preservatives in the food processing industry.     

The first immobilization of pyridine-bis(oxazoline) chiral ligands

[formula: see text] A chiral pyridine-bis(oxazoline) ligand, functionalized with a vinyl group in the pyridine ring, can be polymerized with styrene and divinylbenzene to obtain supported chiral ligands. As proof of the usefulness of this supported ligands, the corresponding ruthenium complexes are catalysts for the cyclopropanation reaction of styrene with ethyl diazoacetate with up to 85% ee.     

Properties and structure of interfacial layers formed by hydrophilic silica dispersions and palmitic acid

The properties and structure of different types of interfacial layers obtained from aqueous dispersions of nanometric silica and palmitic acid (PA) have been studied and characterized by different diagnostics and measurements. The investigations concern PA monolayers spread on the silica dispersions, dispersions in contact with PA solutions in oil and silica dispersions containing PA, aiming at elucidating the role of the PA interaction with the particles and investigating the surface-activity of the originated silica-PA complexes. Drop shape tensiometry was utilized to measure the dynamic surface and interfacial tension while a Langmuir trough apparatus was used to obtain compression isotherms of the spread PA layers and to measure the dilational viscoelasticity according to the oscillating barrier method. Brewster angle microscopy and ellipsometry were utilized to investigate the lateral and vertical structure of the interfacial layers. From this multifold approach emerges a complex picture of the features of these interfacial layers that can be rationalized on the basis of the adsorption of PA on the particle surface. The results evidence a threshold in PA adsorption above which particles change from hydrophilic to partially hydrophobic, promoting their incorporation into the interfacial layer.     

Group 6 heteroatom- and non-heteroatom-stabilized carbene complexes. beta,beta'- and alpha,beta,beta'-annulation reactions of cyclic enamines

Cyclization reactions of group 6 Fischer carbene complexes with cyclopentanone and cyclohexanone enamines are described. Enamine 3a undergoes thermal alpha,beta,beta'-annulation with alkenylcarbene complexes 1 and 2 (THF, 60 degrees C), affording semibullvalenes 5. The metalate intermediates 6, resulting from beta,beta'-annulation of the enamines 3a and 4a, were quantitatively formed by running the reaction in hexane at room temperature. Acid-promoted demetalation of 6 afforded endo-2-bicyclo[3.2.1]octen-8-ones 7 and endo/exo-2-bicyclo[3.3.1]nonen-9-ones 8 (endo/exo = 5:1). Using (S)-methoxymethylpyrrolidine-derived enamines 3b and 4b,c allowed highly enantioenriched cycloadducts endo-(+)-7 as well as endo-(-)-8 and exo-(-)-8 to be accessed. The non-heteroatom-stabilized carbene complex 10 was formed from complex 6 by Me(3)SiOTf-promoted elimination of the methoxy group, characterized by (13)C NMR, and transformed into the organic compounds 7, 7-d, and 11 as well as into bicyclo[3.2.1]octan-2,8-diones 14 and cycloheptanones 15. On the basis of this sequence, enantioenriched cycloheptanones (+)-15 were efficiently prepared in one pot from carbene complexes 2 and enamine 3b (51-55% yield, 91-96% ee). Extension of this work to simple Fischer carbene complexes 16 allowed an appropriate way to generate the nonstabilized pentacarbonyl[(phenyl(alkyl)carbene]tungsten complex 17 to be designed, for which the thermal and chemical behavior leading to compounds 18-21 is described.