Light scalars coupled to photons and non-newtonian forces

A particle phi coupling to two photons couples also radiatively to charged particles, like protons. If the particle is a light scalar, this induced coupling leads to spin-independent non-Newtonian forces. We show that the experimental constraints on exotic, fifth-type forces lead to stringent constraints on the phigammagamma coupling. We discuss the impact on the recent PVLAS results and the role of paraphoton models introduced to solve the PVLAS-CAST puzzle.     

Wastes from Wood Extraction Used in Composite Materials: Behavior after Accelerated Weathering

New materials were obtained by incorporating in polypropylene (PP) matrix 60% wood wastes resulting after extraction with supercritical carbon dioxide, water, and ethanol. Structural, mechanical, thermal, and rheological characterizations, as well as moisture uptake of the composites, were evaluated before and after accelerated weathering. It was found that the extraction method influenced the composite properties due to the hydrophilic-hydrophobic balance. The addition of extracted fibers results in an increase in hardness and tensile properties and a decrease of impact strength as compared to PP.     

Thermogravimetry study of the effectiveness of different reducing agents during sintering of Cr-prealloyed PM steels

The La_0.6Sr_0.4Co_0.2Fe_0.8O₃ (LSCF48) cathode material was used as a protective-conducting coating on an interconnect made of Crofer 22 APU ferritic steel intended for application in intermediate-temperature solid oxide fuel cell (IT-SOFC) stacks. The LSCF48 coating was deposited on the surface of the steel via screen-printing followed by appropriate thermal treatment. The oxidation kinetics of the Crofer 22 APU steel—uncoated and coated with LSCF48—approximately obeys the parabolic rate law in air at 1,073 K under isothermal and cyclic oxidation conditions. The oxidation rate for uncoated steel is higher than that for coated steel. SEM–EDS and XRD investigations showed that the LSCF48 coating interacts with the steel during long-term oxidation in the afore-mentioned thermal conditions, and an intermediate multilayer interfacial zone is formed. This intermediate layer leads to lower area specific resistance in air at 1,073 K in comparison to the Crofer 22 APU steel without surface modification.     

Influence of the steel powder type and processing parameters on the debinding of PM compacts with gelatin binder

Binders present an important part of the powder metallurgy technology as they are vital to provide efficient powder agglomeration and/or lubrication during shaping. At the same time, they have to be easily removed from the compacts during initial stages of sintering without any harmful effect for the base material, as well as for the environment. Therefore, behavior of gelatin as a binder for stainless- and tool-steel gas-atomised powder compacts was studied by thermal analysis and electron microscopy. Thermal analysis showed that peak mass-loss occurred in the range between 340 and 370 °C, depending on the base powder and heating rate. Risk for base powder oxidation at temperatures below 425 °C was detected. Based on the obtained results, it is recommended to perform debinding at ~425 °C after applying a heating rate of around 7.5 °C min^?1. Only in this way efficient enough binder removal can be obtained concurrently to avoiding base powder oxidation.     

Long‐Lived Spin States for Low‐Field Hyperpolarized Gas MRI

Parahydrogen induced polarization was employed to prepare a relatively long‐lived correlated nuclear spin state between methylene and methyl protons in propane gas. Conventionally, such states are converted into a strong NMR signal enhancement by transferring the reaction product to a high magnetic field in an adiabatic longitudinal transport after dissociation engenders net alignment (ALTADENA) experiment. However, the relaxation time T₁ of ～0.6 s of the resulting hyperpolarized propane is too short for potential biomedical applications. The presented alternative approach employs low‐field MRI to preserve the initial correlated state with a much longer decay time T_LLSS=(4.7±0.5) s. While the direct detection at low‐magnetic fields (e.g. 0.0475 T) is challenging, we demonstrate here that spin‐lock induced crossing (SLIC) at this low magnetic field transforms the long‐lived correlated state into an observable nuclear magnetization suitable for MRI with sub‐millimeter and sub‐second spatial and temporal resolution, respectively. Propane is a non‐toxic gas, and therefore, these results potentially enable low‐cost high‐resolution high‐speed MRI of gases for functional imaging of lungs and other applications.     

Synthesis of new-type 1,3,6-triazocine via intramolecular reactions of iodocyclization and [3+2] azido cycloaddition

Selective iodocyclization of 6-(alkenylamino)-1-allylpyrazolo[3,4-d]pyrimidines provided hydrogenated derivatives of 1-allyl-8(9)-iodomethylimidazo(pyrimido)[1,2-a]pyrazolo[4,3-e]pyrimidines which were further reacted with NaN₃ at 75°С to 80°С to give a series of new-type 1,3,6-triazocines annulated with the pyrazole, pyrimidine, imidazole (or pyrimidine), and 1,2,3-triazole rings. The compounds synthesized were structurally characterized by analytical, spectral (IR, ¹H and ¹³C NMR, HPLC-mass), and X-ray diffraction data.     

RuII and RuIII Chloronitrile Complexes: Synthesis,Reaction Chemistry,Solid State Structure,and (Spectro)Electrochemical Behavior

The synthesis of [Ti₆O₄(OiPr)₈(O₂CPh)₈] ( 3 ) and [RuCl(N≡CR)₅][RuCl₄(N≡CR)₂] ( 4a , R = Me; 4b , R = Ph), [Ru(N≡CPh)₆][RuCl₄(N≡CPh)₂] ( 5 ) and [H₃O][RuCl₄(N≡CMe)₂] ( 7a ) is discussed. Crystallization of 5 from CH₂Cl₂ gave trans-[RuCl₂(N≡CPh)₄] ( 6 ). The solid-state structures of 3 , 4a , b , 5 , 6 and 7a are reported. Complex 4b forms a 3D network, while 6 displays a 2D structure, due to π-interactions between the benzonitrile ligands. The (spectro)electrochemical behavior of 4a , b and 6 was studied at 25 and –72 °C and the results thereof are compared with [NEt₄][RuCl₄(N≡CMe)₂] ( 7b ) and [RuCl(N≡CPh)₅][PF₆] ( 8 ). The electrochemical response of the cation and the anion in 4a , b are independent from each other. [RuCl(N≡CR)₅]⁺ possesses one reversible Ru^II/Ru^III process. However, [RuCl₄(N≡CMe)₂]^– was shown to be prone to ligand exchange and disproportionation upon formation of either a Ru^IV and Ru^II species at 25 °C, while at –72 °C the rapid conversion of the electrochemically formed species is hindered. In situ IR and UV/Vis/NIR studies confirmed the respective disproportionation reaction products of the aforementioned oxidation and reduction, respectively.     

From 1D to 2D Cd(II) and Zn(II) Coordination Networks by Replacing Monocarboxylate with Dicarboxylates in Partnership with Azine Ligands: Synthesis,Crystal Structures,Inclusion, and Emission Properties

Eight mixed-ligand coordination networks, [Cd(2-aba)(NO₃)(4-bphz)_3/2]_n·n(dmf) (1), [Cd(2-aba)₂(4-bphz)]_n·0.75n(dmf) (2), [Cd(seb)(4-bphz)]_n·n(H₂O) (3), [Cd(seb)(4-bpmhz)]_n·n(H₂O) (4), [Cd(hpa)(3-bphz)]_n (5), [Zn(1,3-bdc)(3-bpmhz)]_n·n(MeOH) (6), [Cd(1,3-bdc)(3-bpmhz)]_n ·0.5n(H₂O)·0.5n(EtOH) (7), and [Cd(NO₃)₂(3-bphz)(bpe)]_n·n(3-bphz) (8) were obtained by interplay of cadmium nitrate tetrahydrate or zinc nitrate hexahydrate with 2-aminobenzenecarboxylic acid (H(2-aba)), three dicarboxylic acids, sebacic (decanedioic acid, H₂seb), homophthalic (2-(carboxymethyl)benzoic acid, H₂hpa), isophthalic (1,3-benzenedicarboxylic acid, H₂(1,3-bdc)) acids, bis(4-pyridyl)ethane (bpe) and with four azine ligands, 1,2-bis(pyridin-4-ylmethylene)hydrazine (4-bphz), 1,2-bis(1-(pyridin-4-yl)ethylidene) hydrazine (4-bpmhz), 1,2-bis(pyridin-3-ylmethylene)hydrazine (3-bphz), and 1,2-bis(1-(pyridin-3-yl) ethylidene)hydrazine (3-bpmhz). Compounds 1 and 2 are 1D coordination polymers, while compounds 3–8 are 2D coordination polymers. All compounds were characterized by spectroscopic and X-ray diffraction methods of analysis. The solvent uptakes and stabilities to the guest evacuation were studied and compared for 1D and 2D coordination networks. The de-solvated forms revealed a significant increase of emission in comparison with the as-synthesized crystals.