Thiophenium-ylides: Synthesis and reactivity

The reaction of propanedioic acid, 2-diazo-1,3-bis(1,1-dimethylethyl) ester (di-tert-butyl diazomalonate) with a series of cyclopenta[b]thiophenes in the presence of catalytic rhodium acetate was studied. The resulting S—C ylides underwent a rearrangement to form a heterocycle with different topology; thialene, in very low yields. Experimental and spectral data for all compounds are provided.     

Palladium-catalysed Claisen rearrangement of 6-allyloxypurines

6-Allyloxypurines readily undergo palladium-catalysed Claisen rearrangement under mild conditions affording N ¹-substituted hypoxanthines. In contrast with the previously reported protocol, the Claisen rearrangement can be performed using Pd(PPh₃)₄ or Pd(dba)₂/dppf in dry THF at 60°C. The reaction can accommodate variously substituted allyl fragments to position N ¹ of the hypoxanthine skeleton with high yields. Retention of the double bond configuration during rearrangement was observed.     

Applicability of photochemically generated pendant benzoyl peroxides in both “grafting from” and “grafting to” techniques

Methyl methacrylate and styrene copolymers containing pendant benzil groups, such as 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-methyl metacrylate (BzMA/MMA), 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-styrene (BzMA/S), and 1-phenyl-2-(4-propenoylphenyl)-1,2-ethanedione-co-styrene (PCOCO/S), were prepared and used as precursors for photochemically generated pendant benzoyl peroxides. Decomposition of the pendant benzoyl peroxides was subsequently used in grafting processes. Either irradiation or a combination of irradiation with subsequent thermal treatment was adopted for grafting a thin layer of BzMA/MMA copolymer onto the surface of LDPE films. The grafting resulted in a significant decrease in contact angle of the film surface. The same activation strategy was successfully adopted to initiate the polymerisation of acrylic or methacrylic acids from the surface of styrene copolymer films containing the initiator precursor in the polymer side chains (BzMA/S and PCOCO/S). The successful surface grafting was proved by contact angles measurement as well as by infrared spectroscopic analysis.     

Spectral characterisation of new organic fluorescent dyes with an alkoxysilane moiety and their utilisation for the labelling of layered silicates

New fluorescence dyes with an alkoxysilane moiety were synthesised by the condensation of 3-(triethoxysilyl)-1-propanamine (3-aminopropyltriethoxysilane) with 4,10-benzothioxanthene-3,1′-dicarboxylic acid anhydride (BTXA) and N,N-dimethylaminonaphthalene-1,8-dicarboxylic acid anhydride (DMANA), which was accompanied by the formation of an imidic bridge. The compounds N-(3-(triethoxysilyl)propyl)-thioxantheno[2,1,9-dej]isoquinoline-1,3-dione (BTX-S) and 4-(N′, N′-dimethyl)-N-(triethoxysilyl)propyl-1,8-naphthalene dicarboxylic acid imide (DMAN-S) were characterised by steady-state and time-resolved fluorescence spectroscopy in chloroform and ethanol. Both conjugates (BTX-S and DMAN-S) exhibited absorption and emission bands in the same region as the un-substituted BTXA and DMANA. An important Stokes shift was observed for DMAN-S in ethanol. A high fluorescence quantum yield was observed for BTX-S in both solvents and for DMAN-S in chloroform. In addition, the newly developed fluorescent silane dyes were covalently attached to the microscopic particles of layered silicates and on the surface of SiO₂ wafers as a proof of concept for fluorescence particle (surface) visualisation. The surface wafer modification was precisely characterised by X-ray photoelectron spectroscopy (XPS). Successful covalent linkage onto the particles of layered silicates was proved by confocal laser scanning microscopy technique.     

Synthesis and properties of macrocyclic diazene switch with binaphthalene unit attached via acrylamide linkers

2,2′-Diiodo-1,1′-binaphthalene undergoes a tandem Heck reaction with methyl acrylate to afford methyl 2-(7H-dibenzo[c,g]fluoren-7-ylidene)acetate. As a consequence, the target macrocyclic diazene with binaphthalene unit attached via acrylamide linker was prepared by the stepwise building of acrylamide at a binaphthalene moiety, including the Doebner modification of the Knoevenagel condensation, and completed by oxidative macrocyclisation of aniline end-groups. Despite being an equimolar mixture of monomer and dimer, it exhibited remarkable changes in CD spectra due to reversible (E/Z) isomerisation of N=N diazene bonds upon irradiation at 365/465 nm. Although the dimer isomerises from (E) to (Z) isomer 7.4 times faster than the monomer, the latter’s contribution to the change in ellipticity at 307 nm in the photostationary state is 2.4 times greater.     

Short time deposition of TiO2 nanoparticles on SiC as photocatalysts for the degradation of organic dyes

The deposition of TiO₂ nanoparticles on SiC was carried out by mechanical milling under different conditions. SiC–TiO₂ samples were used as photocatalysts for the degradation of organic dyes such as methylene blue and rhodamine B. A short time deposition of TiO₂ nanoparticles was observed during mechanical milling (2 min at 200 rpm) to cover the SiC particles. The presence of SiC and TiO₂ (anatase and rutile) was confirmed by means of X-ray diffraction after thermal treatment at 450 °C. The deposition of TiO₂ on SiC was corroborated by scanning electron microscopy analysis; the thickness of the thin layer of TiO₂ deposited on SiC increases as the proportion of TiO₂ increases. The energy band gap values obtained for these compounds were around 3.0 eV. SiC–TiO₂ photocatalysts prepared by mechanical milling exhibited better activity under UV-light irradiation for the degradation of methylene blue and rhodamine B than commercial TiO₂ powder (titania P25).     

Biologically Active 1-Aminodeoxy and 1-O-Alkyl Derivatives of The Powerful D-Glucosidase Inhibitor 2,5-Dideoxy-2,5-Imino-D-Mannitol

ABSTRACT

By an Amadori rearrangement of easily available 5-azido-5-deoxy-D-glucofuranose with dibenzylamine and subsequent catalytic hydrogenation of the resulting 5-azido-1-(N,N-dibenzyl)amino-1,5-dideoxy-D-fructopyranose, 1-amino-1,2,5-trideoxy-2,5-imino-D-mannitol was obtained in only two steps and in excellent overall yield. Likewise, other amines were employed to introduce extended side chains ultimately suitable for attachment of the inhibitor to solid supports. The reported rearrangement reaction is a high yielding, convenient and apparently general entry to 1-aminodeoxyketopyranoses modified at C-5, facilitated by the ring enlargement of the aldofuranose to the ketopyranose as an additional driving force. A range of selected chain extended analogues was prepared by acylation of N-1. Inhibitors obtained exhibit K _i-values with D-glucosidases in the micromolar range. Interestingly, 1-N-acylation resulted in superior inhibitory activities, as did the addition of a hexyl chain.     

Enhancement of naringenin solution concentration by solid dispersion in cellulose derivative matrices

Naringenin (Nar) is an important bioactive flavonoid with poor organic solubility and oral bioavailability. It is highly promising for treatment of conditions including diabetes, hyperlipidemia, and hepatitis C infection. Amorphous solid dispersion (ASD) of Nar is an appealing way to enhance its solubility, and carboxylated cellulose esters are attractive polymers for this purpose because of their ability to stabilize drugs against crystallization in both solid and solution phases, while restricting drug release to the pH of the small intestine (ca. 6.8). We demonstrate that ASDs of Nar can be formed using such carboxylated cellulose derivatives as cellulose acetate adipate propionate (CAAdP), carboxymethylcellulose acetate butyrate (CMCAB) and hydroxypropylmethylcellulose acetate succinate (HPMCAS). We compare Nar solution concentrations and release profiles from these cellulosic ASDs to those from pure crystalline Nar, and to Nar ASD in poly(vinylpyrrolidinone) (PVP). We show that all polymers in this study form ASDs with Nar, that the PVP ASDs release Nar at both gastric (1.2) and small intestine (6.8) pH, and that the cellulosic polymers release Nar selectively at neutral pH. Solution concentrations of Nar are significantly enhanced from these ASDs. These preliminary studies indicate that HPMCAS, CAAdP, and CMCAB are practical ASD polymers for Nar due to their ability to generate and stabilize high solution concentrations, and their pH-triggered drug release.     

Finished-vehicle transporter routing problem solved by loading pattern discovery

This work addresses a new transportation problem in outbound logistics in the automobile industry: the finished-vehicle transporter routing problem (FVTRP). The FVTRP is a practical routing problem with loading constraints, and it assumes that dealers have deterministic demands for finished vehicles that have three-dimensional irregular shapes. The problem solution will identify optimal routes while satisfying demands. In terms of complex packing, finished vehicles are not directly loaded into the spaces of transporters; instead, loading patterns matching finished vehicles with transporters are identified first by mining successful loading records through virtual and manual loading test procedures, such that the packing problem is practically solved with the help of a procedure to discover loading patterns. This work proposes a mixed-integer linear programming (MILP) model for the FVTRP considering loading patterns. As a special class of routing models, the FVTRP is typically difficult to solve within a manageable computing time. Thus, an evolutionary algorithm is designed to solve the FVTRP. Comparisons of the proposed algorithm and a commercial MILP solver demonstrate that the proposed algorithm is more effective in solving medium- and large-scale problems. The proposed scheme for addressing the FVTRP is illustrated with an example and tested with benchmark instances that are derived from well-studied vehicle routing datasets.     

Chinese regional energy efficiency change and its determinants analysis: Malmquist index and Tobit model

China becomes the largest energy consumer in 2010 but its energy productivity is well below the world average. To meet China’s fast growing energy using, energy efficiency should be especially emphasized under China’s energy policy. This paper focuses on the regional level of energy efficiency change in China. And we analyze total factor energy efficiency for 30 Chinese provinces over the period 1998–2009 using Malmquist index method and Tobit analysis. The Malmquist estimation results suggest there is a dropping change trend of energy productivity growth. Chinese energy efficiency still faces with huge regional disparity, but the energy technical efficiency reflects convergence in the nationwide and west region. As a result of Tobit regression, we find that industrial structure, energy consumption structure and institutional factor have different influences on energy efficiency.