Spectroscopic and electrochemical studies on (2-hydroxypicolinate)-bis(2,2′-bipyridine)ruthenium(II) and related complexes

Summary The synthesis, spectra and electrochemistry of [Ru(bipy)₂-(picOH)]⁺ and -picO-[Ru(bipy)₂]₂ ²⁺ (bipy = 2,2-bipyridine and picOH = 3-hydroxypicolinate ion) are described. The spectroscopic properties in the visible region are dominated by the intense Ru bipy chargetransfer transitions. In the binuclear complex, the two [Ru(bipy)₂L]²⁺ moieties are nonequivalent, exhibiting E _1/2 = 0.69 and 1.20 V versus s.h.e. The partially oxidized species exhibits a weak intervalence transfer band at 1085 nm, and is consistent with a Robin-Day class II mixed valence complex.     

Developing a sequential injection-square wave voltammetry (SI-SWV) method for determination of atrazine using a hanging mercury drop electrode

This paper describes the development of a sequential injection analysis method to automate the determination of atrazine by square wave voltammetry exploiting the concept of monosegmented flow analysis to perform in-line sample conditioning and standard addition. To perform these tasks, an 800 μL monosegment is formed, composed by 400 μL of sample and 400 μL of buffer/standard solution. To obtain an efficient homogenization, the sample solution is divided in five zones intercalated by four zones of the Britton-Robinson buffer (pH 2.0) in presence of appropriate concentration of NaNO₃ and varying atrazine standard concentrations. This mixture zone is isolated from the carrier solution by two 100 μL air bubbles. After homogenization in an auxiliary reaction coil the mixture zone is injected toward the flow cell, which is adapted to the capillary of a hanging drop mercury electrode, at a flow rate of 50 μL s⁻¹. After a suitable delay time, the potential is scanned from −0.5 to −1.2 V versus Ag/AgCl using a frequency of 300 Hz and pulse height of 25 mV. The linear dynamic range is observed for atrazine concentrations between 1.16 × 10⁻⁷ and 2.32 × 10⁻⁶ mol L⁻¹, obeying the linear equation i_p = (−6.91 ± 0.07) × 10⁸[atrazine] + (4 ± 8), with r² = 0.9996, for which the slope is given in nA L mol⁻¹. The detection and quantification limits of the method are 2.1 × 10⁻⁸ and 7.0 × 10⁻⁸ mol L⁻¹, respectively. The sampling frequency is 37 h⁻¹, when the standard addition protocol is followed. This frequency can be increased to 42 h⁻¹ if the protocol to obtain in-line calibration curve is used for quantification. The method was applied for determination of atrazine in spiked river water samples and its accuracy was evaluated by comparison with the batch standard addition approach, which revealed that there is no evidence of statistically significant differences between the two methods.     

Amidomethylation of amodiaquine: antimalarial N-Mannich base derivatives

Novel N-Mannich base-type derivatives of the antimalarial drug amodiaquine were synthesised by reaction with tertiary N-chloromethylamides. With the exception of the derivative of ethyl hippurate, all the so-formed (1-amidomethyl-1H-quinolin-4-ylidene)arylamines displayed high chemical and enzymatic stability. These compounds displayed antimalarial activity against the multi-drug resistant Plasmodium falciparum strain Dd2 (IC₅₀ values 15-31 nM) and demonstrated no significant loss in activity compared to amodiaquine (IC₅₀ 30 nM).     

Elemental concentration in the cortex and hippocampus of Wistar rats by X-ray total reflection fluorescence with synchrotron radiation

Summary The study of trace element levels is of great importance due to their relevance in agingand several neurodegenerative diseases. This work compares the elemental concentrations in different postnatal ages and between the temporal cortex, entorhinal cortex and hippocampus from Wistar rats, using X-ray total reflection fluorescence with synchrotron radiation. Ten elements were determined in brain samples: Ti, Cr, Mn, Fe, Cu, Zn, (at trace level) and P, S, Cl and K (at major levels). The elements that increased with aging in cortical areas were: S, K, Fe, Cu and Zn. Ca and Zn levels decreased with advancing age in the hippocampus. In addition to this, Ti, Mn and Fe levels were more conspicuous in the entorhinal cortex.     

Second-order nonlinear optical properties of the Ag(111)/electrolyte interface in the presence of self-assembled monolayers containing conjugated pi systems. I. Alpha-functionalized terthiophene films on Ag(111)

The nonlinear optical properties of self-assembled monolayers obtained from bonding two different alpha-functionalized terthiophenes (alpha-T3) to (111) silver electrode surfaces have been investigated using second harmonic generation (SHG). The two (alpha-T3) compounds used were functionalized with alkane chains of different lengths (C8 and C4), and each was terminated with a thiol anchoring group. A nitrile group was attached to the terminal thiophene ring of the (alpha-T3) compound with the C4 chain. The orientation of the polarization of the incident beam was changed systematically and gradually between "p" and "s" orientation and the SH signal (isotropic and anisotropic contributions) analyzed in both directions ("P" and "S"). The symmetry of the system was reduced by the presence of the adlayers from C3v to C3. The dependence on the applied potential and the incident wavelength has also been studied. The relative magnitudes and phases of the various second-order tensor elements have been estimated and compared with the values for a bare surface. A resonance process in the (alpha-T3) pi moiety has been investigated, and from this, the effective "band-gap" energies of the organic semiconductor SAMs (i.e., the energy difference between the pi-pi bands) have been estimated.     

Classification of white wine aromas with an electronic nose

This paper reports the use of a tin dioxide multisensor array based electronic nose for recognition of 29 typical aromas in white wine. Headspace technique has been used to extract aroma of the wine. Multivariate analysis, including principal component analysis (PCA) as well as probabilistic neural networks (PNNs), has been used to identify the main aroma added to the wine. The results showed that in spite of the strong influence of ethanol and other majority compounds of wine, the system could discriminate correctly the aromatic compounds added to the wine with a minimum accuracy of 97.2%.     

Electrochromic properties of poly(alkoxy-terthiophenes): an experimental and theoretical investigation

Much effort has been made to synthesize novel compounds and enhance the optical properties of poly(terthiophenes). The electrochromic properties of poly(4,4′′-dimetoxy-3′-methyl-2′-5′,2′′-terthiophene) (PDMMT) and poly(4,4′′-dipentoxy-3′-methyl-2′-5′,2′′-terthiophene) (PDPMT) have been studied focusing on the differences in the alkoxy-group length. Theoretical calculations were employed to elucidate the structural and thermodynamic stability of the monomers and dimmers. The results showed that in this type of thiophenes large alkoxy chains assist positive charge dispersion through hyperconjugative effect. Thus, PDPMT is thermodynamically more stable than PDMMT in the oxidized state, leading to better electrochromic stability and optical memory.     

Production of18F using a natural water target at the CV-28 cyclotron at IPEN-CNEN/SP

The development of an automated water target for the production of¹⁸F is described. The system was fully fested and shown to be reliable and secure. The chemical separation of¹⁸F was carried out using an anionexchange resin and K₂CO₃ as eluent. The¹⁸F production yields were, on average, (4.81±0.42) MBq/Ah and the specific activity was higher than 6.623×10⁵ MBq/mmol. Heat transfer measurements and calculations were made.     

Preconcentration of heavy metals ions from aqueous solutions by means of cellulose phosphate: an application in water analysis

Cellulose phosphate (CELLPHOS) was studied as a collector for analytical preconcentration of traces of Cd(II), Cr(III), Cu(II) and Ni(II) from aqueous sample solution. It has been proved that using chromatographic columns packed with CELLPHOS for preconcentration and 1.0 mol 1(-1) HCl for elution the adsorbed analytes are quantitatively enriched. An enrichment factor of 20 (100 ml sample, 5 ml concentrate) was achieved by this separation procedure, which was applied to a series of water analyses (river, sea, bog water).     

Catalytic cathodic stripping voltammetry of oxidized glutathione at a hanging mercury drop electrode in the presence of nickel ion

Oxidized glutathione (GSSG) can be determined after previous accumulation on the HMDE at E > -0.2 V (vs. the Ag AgCl reference electrode). GSH is formed during the accumulation, possibly by a mercury-ion-assisted hydrolytic disproportionation of GSSG. In the subsequent cathodic scan GSH is released and catalyses the reduction of nickel ion, giving a peak located at -0.6 V. This enables the determination of GSSG by differential-pulse cathodic stripping voltammetry at pH 7.0 in the phosphate acetate or MOPS buffer containing 0.5-1.0 mM Ni(II). The detection limit is 10 nM. The calibration graph is linear even in the presence of small amounts of human serum albumin, HSA. However, HSA increases the detection limit (20 nM for 3 x 10(-4)% HSA). Acetyl-cysteine in small excess or Cu(II) present as reagent impurity do not interfere. Glutathione, cysteine and similar compounds, which accumulate as mercury salts and form stable nickel complexes, will interfere. The method is put forward as a novel alternative stripping voltammetric method to those involving accumulation and determination as mercury or copper salts and complexes, in the knowledge that it may have advantages in particular analytical situations. In particular the method discriminates against compounds which accumulate as mercury salts but which do not form stable nickel complexes.