Synthesis of valuable terpyridine building blocks to generate a variety of metallodendrons by the convergent approach

Efficient strategies for the synthesis of three building-blocks 4′-(functionalized)-2,2′:6′,2″-terpyridine have been developed for the convergent synthesis of metallodendrons; these strategies provide a practical approach for the rational design of highly conjugated metallodendrimers.     

The Trifluoromethyl Anion

First evidence for the existence of free trifluoromethyl anion CF₃⁻ has been obtained. The 3D‐caged potassium cation in [K(crypt‐222)]⁺ is inaccessible to CF₃⁻, thus rendering it uncoordinated (“naked”). Ionic [K(crypt‐222)]⁺ CF₃⁻ has been characterized by single‐crystal X‐ray diffraction, solution NMR spectroscopy, DFT calculations, and reactivity toward electrophiles.     

Measurements of coeluting unlabeled and C-labeled polychlorinated biphenyl congeners with partially overlapping fragment profiles using a tandem mass spectrometry

¹³C-labeled compounds are often employed as surrogate or internal standards to monitor the performance of extraction and instrumental analysis procedures for their unlabeled counterparts. However, labeled and unlabeled counterparts most often coelute chromatographically with overlapping mass ion fragments, posing a challenge to the accurate quantification of these compounds. In the present study, an analytical scheme, using coeluting unlabeled and ¹³C-labeled polychlorinated biphenyl (PCB) congeners as the model compounds, was developed with a low-resolution tandem mass spectrometer (MS/MS) to determine the appropriate ranges of PCB congener concentrations that satisfy the no-interference condition. Interferences from unlabeled PCBs to quantitation of labeled counterparts could be minimized when ¹³C-labeled PCB congeners were quantified in the MS/MS mode within a certain concentration range. In addition, good agreements between the measured and theoretically predicted quantitation errors were observed for all labeled PCB congeners except PCB 180. The exception with labeled PCB 180 was mainly attributed to the occurrence of instrumental analytical uncertainty, as analytical error was also observed with absence of unlabeled PCB 180. These results indicate that MS/MS techniques can serve as a useful tool to minimize interferences with quantitation of isotopically labeled compounds from their unlabeled counterparts, which possess partially overlapping ion fragment profiles.     

On the <Emphasis Type="Italic">k</Emphasis>-gamma <Emphasis Type="Italic">q</Emphasis>-distribution

We provide combinatorial as well as probabilistic interpretations for the q-analogue of the Pochhammer k-symbol introduced by Díaz and Teruel. We introduce q-analogues of the Mellin transform in order to study the q-analogue of the k-gamma distribution.     

A magnetic bead‐based serum proteomic fingerprinting method for parallel analytical analysis and micropreparative purification

ProteinChip surface‐enhanced laser desorption/ionization technology and magnetic beads‐based ClinProt system are commonly used for semi‐quantitative profiling of plasma proteome in biomarker discovery. Unfortunately, the proteins/peptides detected by MS are non‐recoverable. To obtain the protein identity of a MS peak, additional time‐consuming and material‐consuming purification steps have to be done. In this study, we developed a magnetic beads‐based proteomic fingerprinting method that allowed semi‐quantitative proteomic profiling and micropreparative purification of the profiled proteins in parallel. The use of different chromatographic magnetic beads allowed us to obtain different proteomic profiles, which were comparable to those obtained by the ProteinChip surface‐enhanced laser desorption/ionization technology. Our assays were semi‐quantitative. The normalized peak intensity was proportional to concentration measured by immunoassay. Both intra‐assay and inter‐assay coefficients of variation of the normalized peak intensities were in the range of 4–30%. Our method only required 2 μL of serum or plasma for generating enough proteins for semi‐quantitative profiling by MALDI‐TOF‐MS as well as for gel electrophoresis and subsequent protein identification. The protein peaks and corresponding gel spots could be easily matched by comparing their intensities and masses. Because of its high efficiency and reproducibility, our method has great potentials in clinical research, especially in biomarker discovery.     

Straightforward entry to libraries of diversely substituted azinones by a consecutive aza-Michael/palladium-catalyzed functionalization strategy

A highly divergent, flexible, and conceptually simple sequence allowing the parallel solution-phase assembly of functionalized azinone libraries has been developed in a one-pot consecutive fashion. Structural decoration of in situ-generated heterocyclic aza-Michael adducts AB was accomplished by exploiting the diversity potential of Heck, Suzuki, Sonogashira, and Stille reactions.     

Covariance of stochastic integrals with respect to fractional Brownian motion

We find an explicit expression for the cross-covariance between stochastic integral processes with respect to a $d$-dimensional fractional Brownian motion (fBm) $B_t$ with Hurst parameter $H>\raisebox{1ex}{$1$}\!\left/ \!\raisebox{-1ex}{$2$}\right.$, where the integrands are vector fields applied to $B_t$. It provides, for example, a direct alternative proof of Y. Hu and D. Nualart’s result that the stochastic integral component in the fractional Bessel process decomposition is not itself a fractional Brownian motion.     

Epidermal lignin deposition in quinoa cotyledons in response to UV-B radiations

UV-B radiation (280-320 nm) is harmful to living organisms and has detrimental effects on plant growth, development and physiology. In this work we examined some mechanisms involved in plant responses to UV-B radiation. Seedlings of quinoa (Chenopodium quinoa Willd.) were exposed to variable numbers of UV-B radiation doses, and the effect on cotyledons was studied. We analyzed (1) cotyledons anatomy and chloroplasts ultrastructure; (2) peroxidase activity involved in the lignification processes; and (3) content of photosynthetic pigments, phenolic compounds and carbohydrates. Exposure to two UV-B doses induced an increase in the wall thickness of epidermal cells, which was associated with lignin deposition and higher activity of the peroxidase. The chloroplast ultrastructure showed an appearance typical of plants under shade conditions, likely in response to reduced light penetration into the mesophyll cells due to the screening effect of epidermal lignin deposition. Exposure to UV-B radiation also led to (1) enhancement in the level of phenolics, which may serve a protective function; (2) strong increase in the fructose content, a fact that might be related to higher requirement of erythrose-4P as a substrate for the synthesis of lignin and phenolics; and (3) reduction in the chlorophyll concentration, evidencing alteration in the photosynthetic system. We propose that the observed lignin deposition in epidermal tissues of quinoa is a resistance mechanism against UV-B radiation, which allows growing of this species in Andean highlands.     

Rapid determination of moisture and fat in meats by microwave and nuclear magnetic resonance analysis--PVM 1:2003

A peer-verified method is presented for the determination of percent moisture and fat in meat products by microwave drying and nuclear magnetic resonance (NMR) analysis. The method involves determining the moisture content of meat samples by microwave drying and using the dried sample to determine the fat content by NMR analysis. Both the submitting and peer laboratories analyzed 5 meat products by using the CEM SMART system (moisture) and the SMART Trac (fat). The samples, which represented a range of products that meat processors deal with daily in plant operations, included the following: (1) fresh ground beef, high-fat; (2) deboned chicken with skin; (3) fresh pork, low-fat; (4) all-beef hot dogs; and (5) National Institute of Standards and Technology Standard Reference Material. The results were compared with moisture and fat values derived from AOAC-approved methods, 950.46 (Forced Air Oven Drying) and 960.39 (Soxhlet Ether Extraction).     

Determination of polydimethylsiloxane-seawater distribution coefficients for polychlorinated biphenyls and chlorinated pesticides by solid-phase microextraction and gas chromatography-mass spectrometry

Applications of solid-phase microextraction (SPME) in the measurement of very hydrophobic organic compounds (VHOCs) are limited, partly due to the difficulty of calibrating SPME fibers for VHOCs. This study used a static SPME strategy with a large sample volume (1.6 L) and a five-point calibration procedure to determine the distribution coefficients for a large suite of polychlorinated biphenyls (PCBs) and chlorinated pesticides between a polydimethylsiloxane (PDMS) phase (100 microm thickness) coated on a glass fiber and seawater. An extraction time of 12 days was deemed adequate for equilibrium calibration from kinetic experiments. Two groups of randomly selected fibers divided into three batches (up to nine fibers in each batch) were processed separately with two gas chromatography-mass spectrometry (GC-MS) systems. Matrix effects arising from losses of the analytes to glass container walls and stirring bars were corrected. Relative standard deviations within the same batch were generally smaller than those for the entire group. Furthermore, KfVf (Kf and Vf are the distribution coefficient of an analyte between the polymer-coated fiber and aqueous phase and the fiber volume, respectively) values determined with two GC-MS systems were statistically different. These results indicate the calibrated KfVf values were less affected by the random selection of SPME fibers than by other experimental conditions, and therefore average KfVf values may be used for the same type of commercially available SPME fibers. The relative accuracy of our calibration method was similar to that of a previous study [P. Mayer. W.H.J. Vaes, J.L.M. Hermens, Anal. Chem. 72 (2000) 459] employing different coating thickness and calibration procedure. The present study also obtained a bell-shaped relationship between log Kf and log Kow (octanol-water partition coefficient) for PCB congeners with the maximum log Kf corresponding to log Kow approximately 6.5. This bell-shaped relationship was attributed mainly to steric effects arising from the interplay between the PDMS thickness and molecular sizes of the target analytes.