An experimental investigation into the effect of vortex generators on the near-wake flow of a circular cylinder

The effect of the streamwise vortex generators on the near-wake flow structure of a circular cylinder was experimentally investigated. Digital particle image velocimetry (DPIV) measurements were performed in a large circulating water tunnel facility at a Reynolds number of 41,300 where the flow around a bare cylinder was expected to be at the sub-critical flow state. In order to capture various flow properties and to provide a detailed wake flow topology, the DPIV images were analysed with three different but complementary flow field decomposition techniques which are Reynolds averaging, phase averaging and proper orthogonal decomposition (POD). The effect of the vortex generators was clearly demonstrated both in qualitative and in quantitative manner. Various topological features such as vorticity and stress distribution of the flow fields as well as many other key flow characteristics including the length scales and the Strouhal number were discussed in the study. To the best of the authors’ knowledge, the study presents the first DPIV visualization of the near-wake flow of a circular cylinder fitted with the vortex generators in the open literature.     

Spectrofluorimetric Determination of Aflatoxin B1 in Winter Herbal Teas via Magnetic Solid Phase Extraction Method by using Metal–Organic Framework (MOF) Hybrid Structures Anchored with Magnetic Nanoparticles

MIL53(Al)-SiO₂@Fe₃O₄ composite was prepared by co-precipitation route with a typical Stöber synthetic process and ultrasonic-agitation, then subsequently utilized as a multi-component novel sorbent in solid-phase microextraction (SPME) of aflatoxin B1 in winter herbal teas. Microstructural properties of MIL53(Al)-SiO₂@Fe₃O₄ composite was characterized by using Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) methods, and Brunauer–Emmett–Teller (BET) surface area measurement. The MIL53(Al)-SiO₂@Fe₃O₄ composite was found to be a very effective sorbent in spectrofluorimetric determination of aflatoxin B1 (AFB1) in winter herbal teas via magnetic solid-phase extraction (SPE) route. The proposed method showed a wide linear range from 0.5 to 150 ng/ml, low limit of detection (LOD = 0.5 ng/ml), and an acceptable recovery values (70.7–96.5%) in real samples analysis. This study shows that the suggested method possesses an important potential to use for detecting AFB1 in quality control laboratories.     

A New Fluorometric Dosimetry for Low-medium Gamma Radiation Doses

Journal of Fluorescence - In this study, for the first-time, solutions of a Schiff base was evaluated as a possible chemical dosimeter for gamma-rays at low-medium dose ranges. The solutions of...     

Modelling the Process of Multiattribute Choice

In most of the multiattribute utility models it is assumed that the analytical forms of partial and overall utility functions are known, and hence the problem becomes one of estimating the values of model parameters. This assumption is rather restrictive since one may not possess prior knowledge as to the analytical forms of such functions. The present paper is an attempt to eliminate some of the shortcomings of the existing models by proposing two new formulations of the multiattribute choice problem without a priori limitation to any strict form of partial utility function.     

Trace Elemental Analysis of Allium Species by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) with Multivariate Chemometrics

Aerial parts and roots of the 12 Allium species collected from five localities of Turkey were studied for trace elements (Ag, As, Cd, Co, Cr, Cu, Ni, Pb, Se, Tl, V, and Zn) using inductively coupled plasma mass spectrometry (ICP-MS). A tomato leaves certified reference material was used to characterize the accuracy and precision of the analysis. Each Allium species contained Se (315–2740?µg/kg), Tl (2.75–71?µg/kg), V (77–6790?µg/kg), and Zn (3.73–26.6?mg/kg) which can meet the necessary daily intake of these minerals. In addition, chemometric analyses were performed using correlation analysis, principal component analysis, and hierarchical cluster analysis to determine the association of 12 trace elements in the Allium species. Using chemometrics, the distribution of elements between aerial parts and roots, and geographic collection localities of Allium species were also examined. This study is important the consumers because of the wide consumption of Allium species. This report is the first detailed characterization of the metal content of Allium species.     

Effect of cationic surfactant adsorption on the rheological and surface properties of bentonite dispersions

In this study, the adsorption, bridging, and intercalation effects of a cationic surfactant, benzyldimethyltetradecyl ammonium chloride (BDTDACl), on bentonite clay suspensions was investigated. The adsorption, rheological behaviors, and colloidal properties of the clay dispersions were determined as a function surfactant concentration. Adsorption isotherms were obtained using the batch-equilibrium technique. The rheological behavior of the clay suspensions was obtained by shear stress-shear rate measurements within 0-350 s-1 shear rates. The structure of the composite particles was analyzed by using X-ray diffraction analysis and it was found that the expansions of basal d-spacings are less than 16.80 A, suggesting a monolayer structure.     

2-Absorbing and Weakly 2-Absorbing Elements in Multiplicative Lattices

In this article we study weakly 2-absorbing elements and 2-absorbing elements in C-lattices. Next we characterize C-lattices in which every nonzero proper element is a (weakly) 2-absorbing element. We also establish a new characterization for principal element domains in terms of 2-absorbing elements.     

Removal of Pb2+ and Cd2+ ions from aqueous solutions using guanidine modified hydrogels

In this study, experimental measurements have been made on the batch adsorption of cadmium and lead ions from aqueous solutions using poly(guanidine modified 2‐acrylamido‐2‐methylpropan sulfonic acid/acrylic acid/N‐vinylpyrrolidone/2‐Hydroxyethyl methacrylate), P(AMPSG/AAc/NVP/HEMA) hydrogels. The guanidyl end group bearing AMPSG monomer was synthesized from the reaction of AMPS and guanidine. The hydrogels were prepared by UV‐curing technique. The morphology of the dry H10‐hydrogel sample was examined by SEM. The influence of the uptake conditions, such as pH, functional monomer per cent, contact time, initial feed concentration, and foreign metal ions on the metal ion binding capacity of hydrogel, was also tested. The selectivity of the hydrogel toward the different metal ions tested was Hg(II) > Pb(II) > Au(III) > Cd(II). The adsorption isotherm models were applied to the experimental data, and it was seen that the Langmuir isotherm model was the best fit for the adsorption of Cd(II) and Pb(II) ions on P(AMPSG/AAc/NVP/HEMA) hydrogel. It was found that adsorbed lead and cadmium ions on P(AMPSG/AAc/NVP/HEMA) hydrogel can be effectively desorbed by acid leaching and the regenerated P(AMPSG/AAc/NVP/HEMA) hydrogel can be reused almost five times less without any loss of adsorption capacity. Copyright © 2009 John Wiley & Sons, Ltd.     

Influences of Electrolytes, Polymers and a Surfactant on Rheological Properties of Bentonite–Water Systems

Characteristic rheological properties, such as viscosity, shear stress, yield point, gel strength and thixotropy, of natural Ca- bentonite and Na-peptized bentonite were studied after adding LiCl, KCl, CaCl2, MgCl2·6H2O electrolytes; (NaPO3)n, polyvinyl pyrolidone (PVP) polymers and an anionic surfactant (linear alkyl benzene sulphonate, LABS). Changes in flow properties under the influence of various additives at different quantities were investigated in these slurries. The experimental results are discussed in terms of bentonite forms, types and concentrations of additives and influence of exchangeable cations. Bivalent and monovalent cations display entirely different rheological properties in two groups of muds. Furthermore, the difference in the degree of activity of PVP polymer on the viscosity of two mud systems depend on the clay mineral structure. The slurry prepared with Na-bentonite contains a minimum number of tactoids and a maximum number of sheet-bearing clay particles, which reduces the surface area of the clay minerals and increases viscosity by adding PVP polymer.