The essential oils of the aerial parts of two Hypericum taxa (Hypericum triquetrifolium and Hypericum aviculariifolium subsp. depilatum var. depilatum (Clusiaceae)) from Turkey

In this study, essential oil compositions of two Hypericum L. taxa (Hypericum triquetrifolium Turra. and Hypericum aviculariifolium Jaub. et Spach subsp. depilatum var. depilatum (Freyn et Bornm.) Robson) naturally grown in Turkey were determined using gas chromatography and gas chromatography-mass spectrometry systems. The essential oils were obtained by hydrodistillation from the aerial parts of plants. A total of 45 compounds were identified in the essential oils of H. triquetrifolium; 1-hexanal (18.8%), 3-methylnonane (12.5%) and α-pinene (12.3%). In this study, 41 components were identified in H. aviculariifolium subsp. depilatum var. depilatum oil; α-pinene (52.1%), germacrene D (8.5%) and β-pinene (3.6%) were the predominant constituents. The essential oil analysis showed that monoterpene concentrations were higher than that of the sesquiterpenes in both oils. The results were discussed in the meaning of the usefulness of these plants and their chemicals as natural products and potential usage in chemotaxonomy.     

Analysis of glycoforms on the glycosylation site and the glycans in monoclonal antibody biopharmaceuticals

Therapeutic monoclonal antibodies (mAbs), immunoglobulins, have been efficiently used in the treatment of many diseases, such as cancer, inflammatory and cardiovascular diseases, and organ transplantation. mAbs are glycoprotein molecules undergoing posttranslational modifications. Glycosylation is one of the posttranslational modifications. Different glycoforms that are important for maintaining the potency of mAb drugs show various biological activities. Therefore, the profile of the glycans and glycosylation sites should be determined to produce safe, good quality, consistent mAb drugs for human use. For this reason, simple, robust, accurate, and reproducible analytical methods need to be developed. In this article, chromatographic methods for the analysis of the glycoforms on the glycosylation site and the glycans in mAb biopharmaceuticals have been evaluated.     

Uncertainty Modelling in Software Development Projects (With Case Study)

A project scheduling model tailored specifically for software development projects is proposed in this study. The model incorporates uncertainties related to activity durations and network topology. The first type of uncertainty exists due to error-prone coding which might result in elongated task durations caused by validation and debugging sessions. Furthermore, in practice, macro-activities represent groups of sub-tasks in order to simplify the planning and monitoring of the project. Due to the aggregation, it is more difficult to be precise on the duration of a macro-activity.The uncertainty related to the network topology is due to common database design issues or program modules shared among parallel tasks in the project network. These tasks become associated with each other through uncertain Start-to-Start (SS) precedence relationships. On the other hand, SS lags may also be the outcome of technological precedence relationships among pairs of activities. However, the imprecision underlying the work content of a predecessor activity leads to uncertain SS lags.Software development projects are human-intensive projects and hence, the duration of a task depends on the skill of the person assigned to the job as well as his/her learning rate. Thus, a task may be realized by alternative staff members which results in different expected task durations. Hence, a realistic model proposed for software development projects should incorporate staff assignment features under the uncertainties discussed above. In this study, we develop a mathematical model for software development projects and propose heuristic solution methods to be used by the project co-ordinator in preparing the project plan. The heuristic algorithms developed here are tested on real data provided by a consulting firm undertaking software development projects from manufacturing companies in Turkey.     

Selective preconcentration of thorium in the presence of UO(2)(2+), Ce(3+) and La(3+) using Th(IV)-imprinted polymer

We have prepared Th(IV) ion-imprinted polymers, which can be used for the selective preconcentration of Th(IV) ions, represented by uranium and lanthanides. N-methacryloyl-(l)-glutamic acid (MAGA) was chosen as the complexing monomer. In the first step, Th(IV) was complexed with MAGA and the Th(IV)-imprinted poly[ethylene glycol dimethacrylate-N-methacryloyl-(l)-glutamic acid] (Poly(MAGA-EDMA)) beads were synthesized by suspension polymerization. After that, the template Th(IV) ions were removed using 8.0 M HNO₃ solution. The breakthrough capacity was 40.44 mg Th(IV)/g beads. The relative selectivity coefficients of imprinted beads were 68, 97 and 116 for UO₂²⁺, La³⁺ and Ce³⁺, times greater than non-imprinted matrix, respectively. The Th(IV)-imprinted beads could be used many times without decreasing their breakthrough capacities significantly.     

Preconcentration of copper on ion-selective imprinted polymer microbeads

Molecular recognition-based separation techniques have received much attention in various fields because of their high selectivity for target molecules. Molecular imprinting has been recognized as a promising technique for the preparation of such systems. In this study, we have prepared a novel molecular imprinted adsorbent to remove heavy metal ions with high selectivity. The Cu(II)-imprinted poly(ethylene glycol dimethacrylate–methacryloylamidohistidine/Cu(II)) (poly(EGDMA–MAH/Cu(II))) microbeads with an average size of 150–200 μm were prepared by dispersion polymerization. These Cu(II) imprinted microbeads were used in the adsorption–desorption of copper(II) ions from metal solutions. Adsorption equilibria was achieved in about 1 h. The maximum adsorption of Cu(II) ions onto imprinted microbeads was about 48 mg/g. The pH significantly affected the adsorption capacity of imprinted microbeads. The observed adsorption order under competitive conditions was Cu(II) > Zn(II) > Ni(II) > Co(II) in mass basis. The imprinted microbeads can be easily regenerated by 0.1 M EDTA solution with higher effectiveness. The imprinted microbeads showed excellent selectivity for the target molecule (i.e. Cu(II) ions due to molecular geometry). These features make imprinted microbeads very good candidate for selective removal of Cu(II) ions at high adsorption capacity. Detection limit was increased at least 1000-folds with the preconcentration approach using the imprinted microbeads. The method was also applied to certified reference and seawater samples.     

Solution properties of poly(dimethyl siloxane)

The solution properties of poly(dimethyl siloxane) (PDMS) were studied with light scattering (LS), gel permeation chromatography/light scattering (GPC/LS), and viscometry methods. PDMS samples were fractionated, and the weight‐average molecular weights, second virial coefficient, and the z‐average radius of gyration of each fraction were found according to the Zimm method with the LS technique. In this work, the molecular weight range studied was 7.5 × 10⁴ to 8.0 × 10⁵. Molecular weights and molecular weight distributions were determined by GPC/LS. The intrinsic viscosities of these fractions were studied in toluene at 30 °C, in methyl ethyl ketone (MEK) at 20 °C, and in bromocyclohexane (BCH) at 26 °C and 28 °C. The Mark–Houwink–Sakurada relationship showed that toluene was a good solvent, and MEK at 20 °C and BCH at 28 °C were θ solvents for PDMS. The unperturbed dimensions were calculated with LS and intrinsic viscosity data. The unperturbed dimensions, expressed in terms of the characteristic ratio, were found to be 6.66 with different extrapolation methods in toluene at 30 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2678–2686, 2000     

A complex containing both five‐ and six‐coordinate [bis(5‐bromosalicyli­dene)benzene‐1,2‐diimine]chloro­iron(III)

The title compound, aqua­chloro{4,4′‐di­bromo‐2,2′‐[o‐phenylenebis­(nitrilo­methyl­idyne)]­diphenolato‐O,N,N′,O′}iron(III)–chloro{4,4′‐di­bromo‐2,2′‐[o‐phenyl­enebis­(nitrilomethyli‐dyne)]diphenolato‐O,N,N′,O′}iron(III)–di­methyl­form­amide (1/1/1), [FeCl(C₂₀H₁₂Br₂N₂O₂)][FeCl(C₂₀H₁₂Br₂N₂O₂)(H₂O)]·C₃H₇NO, contains one independent five‐coordinate [FeCl(C₂₀H₁₂Br₂N₂O₂)] monomer, one six‐coordinate [FeCl(C₂₀H₁₂Br₂N₂O₂)(H₂O)] monomer and a non‐coordinating di­methyl­form­amide solvent mol­ecule in the asymmetric unit. In the five‐coordinate monomer, the Fe atom shows distorted square‐pyramidal geometry, with the N and O atoms of the ligand at the base and the Cl atom at the apex of the pyramid. In the six‐coordinate monomer, the Fe atom is in a distorted octahedral geometry and coordinated by the donor atoms of the tetrafunctional ligand in the horizontal plane, and the coordination sphere is completed by the O atom of the water mol­ecule and the Cl atom at the axial positions. The title compound contains intermolecular O—H?O hydrogen bonds. Apart from these hydrogen bonds, there are also intermolecular C—H?Cl and C—H?O contacts.     

A New Differential Pulse Voltammetric Method for the Determination of Nitrate at a Copper Plated Glassy Carbon Electrode

 A differential pulse voltammetric method for the determination of nitrate has been described, which is applicable to the analysis of natural water samples with nitrate levels greater than 2.8 × 10⁻⁶ M. A reduction peak for the nitrate ions at a freshly copper plated glassy carbon electrode was observed at about −0.50 V vs Ag ∣AgCl∣KCl_satd electrode in a solution of 2.0 × 10⁻² M Cu²⁺, 0.5 M H₂SO₄ and 1.0 × 10⁻³ M KCl and exploited for analytical purposes. The working linear range was established by regression analysis and found to extend from 2.8 ×10⁻⁶ M to 8.0 × 10⁻⁵ M. The proposed method was applied for the determination of nitrate in natural waters. The detection limit of the method was 2.8 × 10⁻⁶ M and the sensitivity was 0.9683 A·L/mol. The possible interferences by some ions such as phosphate, nitrite and some halides were determined and found to lead to shifts of the peak position and increasing the peak heights. Received March 15, 1999. Revision July 9, 1999.