Characterization of SiC-platelets

Three fractions of SiC platelets were characterized using polarizing microscopy, X-ray diffraction, high resolution Auger electron spectroscopy (AES), electron spectroscopy for chemical analysis (ESCA) and scanning electron microscopy with energy dispersive analysis (SEM/EDX). The chemical analysis of the three fractions is given. The determination of the SiC polytypes (4H, 6H, 15R, 3C) was done and has been correlated with the chemical analysis. The results of the X-ray diffraction investigations confirm the polarizing microscopy observations. Using microanalytical techniques important conclusions about the impurity elements (e.g. B, Al, Fe) and their local distribution could be drawn. Most of them were found to be present on the outermost surfaces of the platelets. Some conclusions concerning the processing of the platelets are suggested.Dedicated to Professor Günther Tölg on the occasion of his 60th birthday     

Resonance-enhanced multiphoton ionization (REMPI) spectroscopy of photolytically generated hot CF radicals

In this paper, we investigate the rotationally resolved spectra of hot CF radicals generated after IR multiphoton dissociation (IRMPD) of CFCl₃ or CF₂Cl₂ and subsequent UV photodissociation. It is shown that these conditions are advantageous for the spectroscopy of transitions involving high rotational quantum numbers and hot bands. Thus molecular constants of CF for the first vibrationally excited state of the electronic ground state (A_v=77.1 cm⁻¹, B_v=1.389 cm⁻¹, D_v=6.570×10⁻⁶ cm⁻¹) are determined for the first time or are calculated more accurately. The spectroscopic method used was resonance-enhanced multiphoton ionization (REMPI) spectroscopy.     

Investigation of conditions allowing the synthesis of acrylamide-based monolithic microcolumns for capillary electrochromatography and of factors determining the retention of aromatic compounds on these stationary phases

The influence of the cross-linker (concentration), the porogen (lyotrophic salt) and the solvent type as well as the type and concentration of up to three "functional", i.e., interactive monomers on the morphology and the chromatographic properties of acrylamide-based hydrophilic monoliths are investigated. High total monomer concentrations favored polymers with a rigid rather than gel-like structure. High cross-linker concentrations also favor the formation of a nodular structure. The addition of a lyotrophic salt favors the formation of small nodules especially at higher monomer concentration; the pore size of the polymer can also be modulated through the salt concentration. Suitable monoliths were further investigated as potential stationary phases for capillary electrochromatography (CEC). Depending on the type and concentration of the monomers, plate numbers between 50,000 and 100,000 were routinely obtained. The standard deviation of the run-to-run reproducibility was below 2% and that of the batch-to-batch reproducibility below 5%. A set of nine hydrophobic and polar aromatic compounds (all noncharged) was used to investigate the retention mechanism. Possible candidates for chromatographic interaction and retention in these monoliths are the hydrophobic polymer backbone itself and the alkyl, carbonyl, hydroxy, amino, amide, and charged groups introduced by the various functional monomers. Judging from our results, the carbonyl and the hydroxy functions, as well as the hydrophobic polymer backbone can be supposed to be the main sites of interaction. The charged but also the alkyl functions seem to be less important in this regard. The polymerization conditions and especially the composition of the reaction mixture have a strong influence on the behavior of the final column.     

A concise synthesis of β-lactam-sulfonamide hybrids

Using ring closing metathesis (RCM) as the key operation, a rapid access to β-lactams fused to a sultam moiety of variable ring size was developed from low cost, commercially available starting materials. An efficient RCM of 4-vinyl-azetidin-2-ones to give 1-aza-bicyclo[4.2.0]oct-4-en-8-ones is also reported.     

Investigations into the Pd-catalysed cross-coupling of phenylacetylene with aryl chlorides: simple one-pot procedure and the effect of ZnCl2 co-catalysis

[PdCl(C6H3(OPPri2)2-2,6)] 1 catalyses the coupling of electron-rich, electron-neutral and electron-deficient aryl chlorides with phenylacetylene in the presence of ZnCl2 as cocatalyst to give the products in modest to excellent yields.     

Analysis of free and esterified sterols in vegetable oil methyl esters by capillary GC

The introduction of quality standards for vegetable oil methyl esters is gaining in importance due to their increased use as diesel fuel substitutes and as technical products. Free and esterified sterols, the main constituents of the unsaponifiable matter in vegetable oils, are recovered in vegetable oil methyl esters and may influence the technical properties of vegetable oil methyl ester products. A rapid gas chromatographic method for the qualitative and quantitative determination of free and esterified sterols in vegetable oil methyl esters has therefore been developed. The concentration of the free sterols as well as their qualitative and quantitative composition and the concentration of the sterol esters have been determined in rape seed oil methyl ester samples by GC–FID. Prior to analysis, the free sterols were silylated with N,O-bis(trimethylsilyl)trifluoroacetamide with 1% of trimethylchlorosilane; betulinol was used as an internal standard. Calibration was performed by analysis of standard solutions containing β-sitosterol, cholesteryl stearate, and betulinol. The reproducibility of the quantitative results has been evaluated by repeated injections of the same test solution and by repeated complete analysis of the same sample.     

Octahedral (cis-cyclam)iron(III) complexes with O,N-coordinated o-iminosemiquinonate(1-) pi radicals and o-imidophenolate(2-) anions

Three octahedral complexes containing a (cis-cyclam)iron(III) moiety and an O,N-coordinated o-iminobenzosemiquinonate pi radical anion have been synthesized and characterized by X-ray crystallography at 100 K: [Fe(cis-cyclam)(L(1-3)(ISQ))](PF(6))(2) (1-3), where (L(1-3)(ISQ)) represents the monoanionic pi radicals derived from one-electron oxidations of the respective dianion of o-imidophenolate(2-), L(1), 2-imido-4,6-di-tert-butylphenolate(2-), L(2), and N-phenyl-2-imido-4,6-di-tert-butylphenolate(2-), L(3). Compounds 1-3 possess an S(t) = 0 ground state, which is attained via strong intramolecular antiferromagnetic exchange coupling between a low-spin central ferric ion (S(Fe) = 1/2) and an o-imino-benzosemiquinonate(1-) pi radical (S(rad) = 1/2). Zero-field M?ssbauer spectra of 1-3 at 80 K confirm the low-spin ferric electron configuration: isomer shift delta = 0.26 mm s(-1) and quadrupole splitting DeltaE(Q) = 1.96 mm s(-1) for 1, 0.28 and 1.93 for 2, and 0.33 and 1.88 for 3. All three complexes undergo a reversible, one-electron reduction of the coordinated o-imino-benzosemiquinonate ligand, yielding an [Fe(III)(cis-cyclam)(L(1-3)(IP))](+) monocation. The monocations of 1 and 2 display very similar rhombic signals in the X-band EPR spectra (g = 2.15, 2.12, and 1.97), indicative of low-spin ferric species. In contast, the monocation of 3 contains a high-spin ferric center (S(Fe) = 5/2) as is deduced from its M?ssbauer and EPR spectra.     

The rhodium complex of a tris(bipyridine) ligand—Its electrochemical behaviour and function as mediator for the regeneration of NADH from NAD+

The tris-bipyridine ligand3a and its stoichiometric Rh³⁺ complex have been prepared. Cyclovoltammograms of the complex at pH 7.4 using a glassy carbon disk electrode reveal a strong reduction peak at –620 mV and two weak reduction peaks at more negative voltage. The reduction potential of the new complex is shifted by 300 mV to more positive values as compared to [Rh(bipy)₃]³⁺. There is no reversible reoxidation peak of the Rh(I) complex formed due to the decomplexation of one of the three bipyridine units in the course of the transition Rh(III)Rh(I). The Rh(III) complex of3a was also studied with respect to its function as a possible redox mediator for the electrochemical regeneration of NADH from NAD⁺. The preparative electrolysis of the Rh³⁺ complex of3a in the presence of NAD⁺ yields a selective formation of NADH, whereas NAD dimers were not detected. On the other hand, a significant acceleration of this reaction compared to [Rh(bipy)₃]³⁺ was not observed.     

Polycarboxyhydrazides with ferrocenylene groups in the main chain

Polycarboxyhydrazides essentially of the type \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm C}_{10} {\rm H}_8 {\rm Fe}\hbox{---}{\rm CONHNHCO}\rlap{--}]_n $\end{document} are synthesized by low-temperature solution condensation of 1,1′-di(chlorocarbonyl) ferrocene with hydrazine or 1, 1′-ferrocenedicarboxyhydrazide and hexamethylphosphoramide as solvent. In an analogous manner the polycondensation of 1, 1′-di(chlorocarbonyl)ferrocene with oxalyldihydrazide leads to polyhydrazides essentially possessing the structure \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm C}_{10} {\rm H}_8 {\rm Fe}\hbox{---}{\rm CONHNHCO}\hbox{---}{\rm CONHNHCO}\rlap{--}]_n $\end{document}. Both polymer types exhibit inherent viscosities (0.08–0.19 dl./g.) considerably lower than reported for analogous aliphatic or benzene-aromatic polyhydrazides. This behavior points to premature chain termination via heterobridging imide groups as a result of the welldocumented tendency of appropriately substituted ferrocene compounds to undergo intramolecular cyclization. In addition, elemental analytical and spectroscopic evidence, coupled with the failure of both polymer types to undergo cyclodehydration to the corresponding 1,3,4-oxadiazole polymers upon heat treatment, suggests some structural irregularities in the aliphatic connecting segments arising from ferrocenoylation of secondary amino groups with resultant branching. With the polyhydrazide prepared from 1, 1′-di(chlorocarbonyl)ferrocene and 1, 1′-ferrocenedicarboxyhydrazide it is shown spectroscopically that treatment with alkali results in conversation of the nonconjugated hydrazide structure of the connecting segments into the polyconjugated tautomeric enol form comprising azine groups.     

HO2 ELIMINATION FROM α-HYDROXYALKYLPEROXYL RADICALS IN AQUEOUS SOLUTION

Abstract— In aqueous solutions α-hydroxyalkylperoxyl radicals undergo a spontaneous and a base catalysed HO₂ elimination. From kinetic deuterium isotope effects, temperature dependence, and the influence of solvent polarity it was concluded that the spontaneous reaction occurs via an HO₂ elimination followed by the dissociation of the latter into H⁺ and O₂^-. The rate constant of the spontaneous HO₂ elimination increases with increasing methyl substitution in α-position ( k (CH₂(OH)O₂) < 10s^-1 k (CH₃CH(OH)O₂) = 52s^-1 k ((CH₃)₂C(OH)O₂) = 665 s^-1). The OH^- catalysed reaction is somewhat below diffusion controlled. The mixture of peroxyl radicals derived from polyhydric alcohols eliminate HO₂ at two different rates. Possible reasons for this behaviour are discussed. The mixture of the six peroxyl radicals derived from d -glucose are observed to eliminate HO₂ with at least three different rates. The fastest rate is attributed to the HO₂ elimination from the peroxyl radical at C-l ( k > 7000s^-1). Because of the HO₂ eliminations the peroxyl radicals derived from d -glucose do not undergo a chain reaction in contrast to peroxyl radicals not containing an α-OH group. In competition with the first order elimination reactions the α-hydroxylalkylperoxyl radicals undergo a bimolecular decay. These reactions are briefly discussed.