New insights on proteomics of transgenic soybean seeds: evaluation of differential expressions of enzymes and proteins

This work reports the evaluation of differentially expressed enzymes and proteins from transgenic and nontransgenic soybean seeds. Analysis of malondialdehyde, ascorbate peroxidase (EC 1.11.1.11), glutathione reductase (EC 1.6.4.2), and catalase (EC 1.11.1.6) revealed higher levels (29.8, 30.6, 71.4, and 35.3%, respectively) in transgenic seeds than in nontransgenic seeds. Separation of soybean seed proteins was done by two-dimensional polyacrylamide gel electrophoresis, and 192 proteins were identified by matrix-assisted laser desorption/ionization (MALDI) quadrupole time-of-flight (QTOF) mass spectrometry (MS) and electrospray ionization (ESI) QTOF MS. Additionally, the enzyme CP4 EPSPS, involved in the genetic modification, was identified by enzymatic digestions using either trypsin or chymotrypsin and ESI-QTOF MS/MS for identification. From the proteins identified, actin fragment, cytosolic glutamine synthetase, glycinin subunit G1, and glycine-rich RNA-binding protein were shown to be differentially expressed after analysis using the two-dimensional difference gel electrophoresis technique, and applying a regulator factor of 1.5 or greater.     

Structure of the catalytic sites in Fe/N/C-catalysts for O(2)-reduction in PEM fuel cells

Fe-based catalytic sites for the reduction of oxygen in acidic medium have been identified by (57)Fe M?ssbauer spectroscopy of Fe/N/C catalysts containing 0.03 to 1.55 wt% Fe, which were prepared by impregnation of iron acetate on carbon black followed by heat-treatment in NH(3) at 950 °C. Four different Fe-species were detected at all iron concentrations: three doublets assigned to molecular FeN(4)-like sites with their ferrous ions in a low (D1), intermediate (D2) or high (D3) spin state, and two other doublets assigned to a single Fe-species (D4 and D5) consisting of surface oxidized nitride nanoparticles (Fe(x)N, with x≤ 2.1). A fifth Fe-species appears only in those catalysts with Fe-contents ≥0.27 wt%. It is characterized by a very broad singlet, which has been assigned to incomplete FeN(4)-like sites that quickly dissolve in contact with an acid. Among the five Fe-species identified in these catalysts, only D1 and D3 display catalytic activity for the oxygen reduction reaction (ORR) in the acid medium, with D3 featuring a composite structure with a protonated neighbour basic nitrogen and being by far the most active species, with an estimated turn over frequency for the ORR of 11.4 e(-) per site per s at 0.8 V vs. RHE. Moreover, all D1 sites and between 1/2 and 2/3 of the D3 sites are acid-resistant. A scheme for the mechanism of site formation upon heat-treatment is also proposed. This identification of the ORR-active sites in these catalysts is of crucial importance to design strategies to improve the catalytic activity and stability of these materials.     

Polymerized fluorescent liposomes incorporating lanthanide ions

This paper describes the design and synthesis of a polymerizable lipid capable of complexing lanthanide ions. The lipid has been successfully incorporated into liposomes and then polymerized. Fluorescence studies indicate that the diacetylene (unpolymerized lipid) and the conjugated alkenes (after polymerization) can be used as sensitizers for the lanthanide ion.     

Mechanised flow system for on-line microwave digestion of food samples with off-line catalytic spectrophotometric determination of cobalt at ng l-1 levels

A mechanised system for on-line slurry food sample digestion was developed and an off-line cobalt determination was performed. The stabilised slurry sample was introduced into an air carrier stream until reaching the digestion coils located inside a household microwave oven. Software written in Visual Basic 3.0 was developed to permit the transport of the slurry samples and the programming of the microwave oven and also the control of the mineralization valve. The proposed system was optimized for determination of cobalt in certified samples such as mussels, bovine liver and fish and also uncertified fish samples. The digestion parameters were established as 3 mol l-1 HNO3 for mussels, 3 mol l-1 HNO3 plus 0.16% v/v H2O2 for bovine liver and 12 mol l-1 HNO3 for fish employing maximum power for 5 min of microwave actuation. In the subsequent spectrophotometric method for the catalytic determination of cobalt, the Tiron and hydrogen peroxide concentrations were 1.8 x 10(-3) and 3.0 x 10(-4) mol l-1, respectively, and the sample residence time was 300 s as determined by an optimisation process. The proposed method features a linear range from 10 to 200 ng l-1 Co (r > 0.996) with detection and quantification limits of 1.7 and 5.5 ng l-1 Co, respectively. The precision, expressed as RSD, was 2.4% (n = 12) for repeatability and 5.2% (n = 10) for reproducibility and the accuracy of the proposed method was assessed by using certified samples and an alternative technique (ETAAS).     

On-line bi-directional electrostacking for As speciation/preconcentration using electrothermal atomic absorption spectrometry

A method using bi-directional electrostacking (BDES) in a flow system is presented for As preconcentration and speciation analysis. Some parameters such as electrostacking time and applied voltage, support buffers and their concentrations were investigated. Boric acid plus sodium hydroxide at 0.1 mol/l concentration was selected as support buffer to improve the pre-concentration factor (PF) for As(V). An analytical range from 2.0 to 50.0 μg l⁻¹, and 0.35 μg l⁻¹ as limit of detection, when applied 750 V for 20 min, were achieved. Under these conditions, a pre-concentration factor of 4.8 was obtained. The proposed method was applied to determine As(V) in mineral water and natural water samples (river, fountain and gold mine) from Ouro Preto city. Recoveries from 93.5 to 106.4% were achieved at 10 μg l⁻¹ added As level (R.S.D.s between 3 and 7%). Potassium permanganate (10 mg l⁻¹) was used for oxidising As species in order to determine total As, being established the concentration of As(III) from the difference between total As and As(V).     

Relationship between kováts retention indices and molecular connectivity indices of tetralones, coumarins and structurally related compounds

A study was undertaken to test the ability of several molecular connectivity indices to predict the retention indices (I) of tetralones, coumarins and structurally related compounds determined on OV-17 and Apiezon L as stationary phases. The regression analyses with I_OV-17 showed that a two-variable linear regression equation with ²χ and ⁴χ^v_pc gives the best correlation coefficient, suggesting that retention depends basically on branching and the presence and number of adjacent atoms, and secondarily on unsaturations and the number and orientation of substituents. I_ApL gives the best correlation with a two-variable linear regression equation with ¹χ and ³χ^v_p indicating that on this stationary phase retention depends basically on the presence and number of adjacent atoms, and secondarily on unsaturation, branching of adjacent atoms and the presence of heteroaroms. ΔI (ΔI = I_OV-17 - I_ApL), according to the different polarities of both phases, considered to be a measure of the polar forces in retention, does not give a good correlation.     

On-line molecularly imprinted solid phase extraction for the selective spectrophotometric determination of catechol

A molecularly imprinted polymer has been synthesized for a selective on-line catechol extraction, followed by its spectrophotometric determination in guarana powder, mate tea and tap water samples. A clean-up column, containing a methacrylic polymer + C₁₈ solid phase, was also used in order to enhance selectivity. The imprinted polymer was prepared by bulk polymerization using catechol as template and 4-vinylpyridine as the functional monomer. Permanganate solution was used as spectrophotometric reagent, where Mn(VII) was reduced to Mn(II) by catechol in an acid medium, causing color loss, which was monitored at 528 nm. Physical (extraction flow rate, elution flow rate, coil length) and chemical (nature and concentration of the eluent, potassium permanganate concentration) variables were optimized, and the selectivity was appraised using three molecules (4-chloro-2-methylphenol, 2-cresol, 2-methoxyphenol) similar to catechol. These molecules did not present interference in 1:8, 1:10 and 1:10 (catechol/concomitant) proportions, respectively. The analytical calibration curve ranged from 3.0 up to 100 μmol L^− 1 (r > 0.999; seven concentrations levels, n = 3) and the limits of detection (LOD) and quantification (LOQ) were 0.8 and 2.7 μmol L^− 1, respectively. Precision, expressed as RSD, was of 3.0% (20 μmol L^− 1, n = 10), and the analytical frequency was 15 h^− 1. Accuracy was checked by the HPLC technique and the results did not present significant difference at 95% confidence levels according to the t test.     

Determination of bismuth in metallurgical materials using a quartz tube atomizer with tungsten coil and flow injection-hydride-generation atomic absorption spectrometry

A method for the determination of bismuth in metallurgical materials using hydride generation coupled with a merging zones flow system and atomic absorption spectrometry using a quartz tube atomizer with tungsten coil is proposed. The parameters related to the bismuthine generation, the flow injection system and the use of a tungsten coil were studied and the optimized system shows a wide calibration range and good stability over time, without losses in sensitivity. The analytical curve is linear from 10 to 750 μg l⁻¹ of Bi with R0.999. A detection limit of 1.9 ng Bi and an analytical frequency of 60 determinations per hour were obtained. Five metallurgical reference materials were analyzed with the proposed method after their acid dissolution. The results obtained were in good agreement with certified or recommended values, and the relative standard deviations were lower than 5%.     

An improved monosegmented continuous-flow system for sample introduction in flame atomic spectrometry

A monosegmented system for sample introduction which does not require air removal is proposed. The sample is intercalated into an unsegmented carrier stream together with air plugs. Segmentation involving the placement of a single air plug in the tailed portion of the sample is also investigated and compared with the original approach in which the sample is introduced between two air bubbles. Effects of sample volume (25–1000 μl) and length of the air plugs (5–200 cm) on the recorded peak and measurement reproducibility are discussed. Flame instability caused by the air plugs is not a problem with the larger samples. The single-line system proposed for determination of zinc in plant digests is very stable. Limited dispersion is achieved by injecting only about 100 μl of sample; a sampling rate of 400 measurements per hour at the 1% carryover level can be attained. Precise results (r.s.d. ca. 1%) in agreement with those obtained by conventional atomic absorption spectrometry (a.a.s.) are achieved. The advantages of the proposed system compared to a conventional flow-injection system for a.a.s. are emphasized. The determination of calcium in natural waters demonstrates the feasibility of monosegmentation when a reagent solution must be added. Lanthanum solution can be added by merging zones or by confluence, either before or after the sample injection. The accuracy, precision, sample consumption and system stability attained are favourable.     

Can nature's design be improved upon? High strength, transparent nacre-like nanocomposites with double network of sacrificial cross links

The preparation of a high-strength and highly transparent nacre-like nanocomposite via layer-by-layer assembly technique from poly(vinyl alcohol) (PVA) and Na+-montmorillonite clay nanosheets is reported in this article. We show that a high density of weak bonding interactions between the polymer and the clay particles: hydrogen, dipole-induced dipole, and van der Waals undergoing break-reform deformations, can lead to high strength nanocomposites: sigmaUTS approximately 150 MPa and E' approximately 13 GPa. Further introduction of ionic bonds into the polymeric matrix creates a double network of sacrificial bonds which dramatically increases the mechanical properties: sigmaUTS approximately 320 MPa and E' approximately 60 GPa.