The impact of volatile compounds released by paper on cellulose degradation in ambient hygrothermal conditions

The reactivity towards cellulose of various volatile compounds commonly released by paper was studied. Sheets of Whatman No. 1 (W1) and No. 40 (W40) were exposed to various concentrations of these compounds in vapour phase ranging from 20 to 80 ppm in closed vessels for 52 days in controlled ambient conditions, after which they were hygrothermally aged. The measured properties of the paper were copper number, degree of polymerization, zero-span breaking length, pH and yellowness index. The results showed that hydrogen peroxide was the most aggressive among the volatile compounds tested as it severely degraded W1 cellulose. The exposure of W1 to formic acid led to significant degradation, designating this volatile organic compound (VOC) as the most reactive toward cellulose among the carboxyl and carbonyl functionalized VOCs tested. On the other hand, acetic acid was found comparatively less reactive. Nitrogen oxides, which were produced up to 3 ppm from a side-reaction of the carboxylic acids with the magnesium nitrate used to control the relative humidity in the closed vessels, appeared to contribute significantly to the degradation despite their low concentration. Antagonistic effects were evidenced in binary vapour mixtures where the presence of aldehydes (formaldehyde and acetaldehyde) counteracted substantially the degradation induced by the most reactive compounds. It was also shown that acetaldehyde, hexanal and furfural in individual exposures had little to no reactivity. Upon exposure to formaldehyde, the rate of glycosidic bond cleavage of cellulose induced by the ageing of W1 was significantly reduced.     

Exemples de Lattès et domaines faiblement sphériques de ℂ<Superscript><Emphasis Type="Italic">n</Emphasis></Superscript>

 We describe the attracting basins of the origin in ℂ ^k+1 for the polynomial lifts of Lattès examples. We show that the boundary of these bounded pseudoconvex domains is a quotient of a compact spherical hypersurface, and we describe the singularities that appear. These domains are surprising, because they are very close to the ball, and admit non injective proper holomorphic self-maps. We also explicit some Lattès examples in dimension 2. Received: 17 October 2002 / Revised version: 7 February 2003 Published online: 19 May 2003 Mathematics Subject Classification (2000): 14K25, 32S25, 32T99, 32H50     

On the formation of anisotropic gold nanoparticles by sputtering onto a nitrile functionalised ionic liquid

Sputtering deposition of gold onto the 1-(butyronitrile)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BCN)MI·N(Tf)(2) ionic liquid (IL) has generated colloidal and stable gold nanospheres (AuNS) and gold nanodisks (AuND) in a bimodal size distribution. Upon increasing the sputtering discharge voltage, three distinct phenomena were observed: (i) the mean diameter of both AuNS and AuND decreased; (ii) the population with lower diameters increased and (iii) the formation of AuND disappeared at voltages higher than 340 V. By dissolving the colloidal gold nanoparticles (AuNPs) in isopropanol and dropping the product onto carbon-coated Cu grids, 2D and 3D superlattices tended to be formed, as observed by transmission electron microscopy (TEM). Therefore, the formation of AuND is probably related to a strong interaction between sputtered Au atoms of low kinetic energy and the nitrile groups orientated to the vacuum phase of the IL surface, which drives the preferential anisotropic lateral growth.     

Determination of carbohydrate- and lignin-derived components in complex effluents from cellulose processing by capillary electrophoresis with electrospray ionization-mass spectrometric detection

Degradation products from lignocellulosic materials receive increasing attention due to the continuously growing interest in their utilization. The inherent structural variance of lignocellulosics combined with the intricacy of lignocellulosic processing (e.g. pulping of wood and bleaching of cellulosic pulps) and the complexity of degradation processes occurring therein result in rather complex mixtures in the process streams and effluents that contain a large quantity of structurally different degradation products. This is true for most processing steps, but also for degradation reactions occurring during aging of lignocellulosic materials, such as paper, cellulosic tissue or textiles. In order to render such mixtures better analytically accessible than hitherto possible a CE-ESI-MS method was established for the simultaneous determination of aliphatic carboxylic acids from the degradation of (hemi)celluloses and aromatic compounds from lignin degradation. CE and ESI-MS parameters have been optimized towards sensitivity and good reproducibility. The method was tested in two real-world scenarios: the determination of major components in effluents from bleaching stages in the pulp and paper industry, and the analysis of degradation products in extracts of naturally aged papers. The advantages and drawbacks of this approach are critically discussed.