Adsorption of dyes on activated carbon and graphitic thermal carbon black

The adsorption of a basic dye (Methylene Blue; MB) and an acidic dye (Acid Orange; AO) has been studied on three activated carbons (ACs; FAS, SKD, and BAU) significantly differing in their porous structures and surface concentrations of ion-exchange groups and on graphitic thermal carbon black (GTCB). The effective specific surface area of FAS, SKD, and BAU determined by dye adsorption is, respectively, 60, 50, and 40% of the BET nitrogen adsorption surface area. The MB uptake on ACs and GTCB increases with rising pH, while the AO uptake decreases. Addition of an electrolyte (0.3 M NaCl) virtually does not effect the adsorption of dyes on ACs and GTCB. It is suggested that hydrophobic interactions, and not ionic ones, are the major contributors to the adsorption of dyes on ACs.     

Low frequency limits of third-order harmonic coefficients for atomic hydrogen in any level of discrete energy spectrum

In this paper the analytical expression is derived for the third-order optical harmonic coefficients x _abcd ^v (,,) of the atomic hydrogen at very low frequencies 0 in many level of the discrete energy spectrum.The author expresses his thank to Prof. Nguyen Van Hieu for suggesting the problem and fruitful discussions.     

Synthesis and Application of Epoxidized Natural Rubber

Abstract

North Vietnamese NR latexes were successfully epoxidized using peracetic acid at moderate temperature and pH range. The epoxide contents of pure epoxidized natural rubber (ENR) are from 5 to 70 mol%. The ENR products were characterized and determined by spectral and thermal analysis besides the chemical titration. Conditions of longlasting or excessive temperature, or high acidic pH led to side ring opened products, proved easily by IR, ¹H-NMR, and DSC analysis. The ENR were vulcanized using a semiefficient system. The epoxidation increased the adhesion between rubber and tire cord and metal. This effect becomes stronger beyond 25 mol% and tends to be limited at over 60 mol%. The ENRs were used to formulate special-purpose adhesives. The shear strength of the adhesive ranges from 32 to 45 kg/cm² for bonding rubber to nylon and rubber to metal, respectively.     

Perfect controlled joint remote state preparation independent of entanglement degree of the quantum channel

We construct a quantum circuit to produce a task-oriented partially entangled state and use it as the quantum channel for controlled joint remote state preparation. Unlike most previous works, where the parameters of the quantum channel are given to the receiver who can accomplish the task only probabilistically by consuming auxiliary resource, operation and measurement, here we give them to the supervisor. Thanks to the knowledge of the task-oriented quantum channel parameters, the supervisor can carry out proper complete projective measurement, which, combined with the feed-forward technique adapted by the preparers, not only much economizes (simplifies) the receiver's resource (operation) but also yields unit total success probability. Notably, such apparent perfection does not depend on the entanglement degree of the shared quantum channel. Our protocol is within the reach of current quantum technologies.     

Redox‐responsive core cross‐linked micelles of poly(ethylene oxide)‐b‐poly(furfuryl methacrylate) by Diels‐Alder reaction for doxorubicin release

Redox‐responsive core cross‐linked (CCL) micelles of poly(ethylene oxide)‐b‐poly(furfuryl methacrylate) (PEO‐b‐PFMA) block copolymers were prepared by the Diels‐Alder click‐type reaction. First, the PEO‐b‐PFMA amphiphilic block copolymer was synthesized by the reversible addition‐fragmentation chain transfer polymerization. The hydrophobic blocks of PFMA were employed to encapsulate the doxorubicin (DOX) drug, and they were cross‐linked using dithiobismaleimidoethane at 60 °C without any catalyst. Under physiological circumstance, the CCL micelles demonstrated the enhanced structural stability of the micelles, whereas dissociation of the micelles took place rapidly through the breaking of disulfide bonds in the cross‐linking linkages under reduction environment. The core‐cross‐linked micelles showed fine spherical distribution with hydrodynamic diameter of 68 ± 2.9  nm. The in vitro drug release profiles presented a slight release of DOX at pH 7.4, while a significant release of DOX was observed at pH 5.0 in the presence of 1,4‐dithiothreitol. MTT assays demonstrated that the block copolymer did not have any practically cytotoxicity against the normal HEK293 cell line while DOX‐loaded CCL micelles exhibited a high antitumor activity towards HepG2 cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3741–3750     

Efficient polymer passivation of ligand‐stripped nanocrystal surfaces

Water‐dispersible, polymer‐wrapped nanocrystals are highly sought after for use in biology and chemistry, from nanomedicine to catalysis. The hydrophobicity of their native ligand shell, however, is a significant barrier to their aqueous transfer as single particles. Ligand exchange with hydrophilic small molecules or, alternatively, wrapping over native ligands with amphiphilic polymers is widely employed for aqueous transfer; however, purification can be quite cumbersome. We report here a general two‐step method whereby reactive stripping of native ligands is first carried out using trialkyloxonium salts to reveal a bare nanocrystal surface. This is followed by chemically directed immobilization of a hydrophilic polymer coating. Polyacrylic acids, with side‐chain grafts or functional end groups, were found to be extremely versatile in this regard. The resulting polymer‐wrapped nanocrystal dispersions retained much of the compact size of their bare nanocrystal precursors, highlighting the unique role of monomer side‐chain functionality to serve as effective, conformal ligation motifs. As such, they are well poised for applications where tailored chemical functionality at the nanocrystal's periphery or improved access to their surfaces is desirable. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Designing liquid-crystalline dendronised hexa-adducts of [60]fullerene via click chemistry

ABSTRACT

Liquid-crystalline [60]fullerodendrimers were constructed via click chemistry based on the reaction between hexa-adducts of [60]fullerene (C₆₀) bearing 12 azide groups and alkyne-terminated cyanobiphenyl dendrons of first- and second-generation. The structure of all the new compounds was confirmed by IR, UV, ¹H and ¹³C NMR spectroscopies and mass spectrometry. The mesomorphic properties were studied by polarised optical microscopy, differential scanning calorimetry and small-angle X-ray scattering. The hexa-adduct of C₆₀ functionalised with the first-generation dendrons gave rise to the formation of a smectic A phase and a rectangular columnar phase (c2mm symmetry) while the hexa-adduct of C₆₀ decorated with the second-generation dendrons displayed only a rectangular columnar phase (c2mm symmetry). Our results show that the hexa-adduct of C₆₀ is a unique synthetic platform for the design of fullerodendrimers and dendronised materials.     

Two weight commutators in the Dirichlet and Neumann Laplacian settings

In this paper we establish the characterization of the weighted BMO via two weight commutators in the settings of the Neumann Laplacian ${\mathrm{\Delta }}_{N_{+}}$ on the upper half space ${\mathbb{R}}_{+}^n$ and the reflection Neumann Laplacian ${\mathrm{\Delta }}_N$ on ${\mathbb{R}}^n$ with respect to the weights associated to ${\mathrm{\Delta }}_{N_{+}}$ and ${\mathrm{\Delta }}_N$ respectively. This in turn yields a weak factorization for the corresponding weighted Hardy spaces, where in particular, the weighted class associated to ${\mathrm{\Delta }}_N$ is strictly larger than the Muckenhoupt weighted class and contains non-doubling weights. In our study, we also make contributions to the classical Muckenhoupt–Wheeden weighted Hardy space (BMO space respectively) by showing that it can be characterized via the area function (Carleson measure respectively) involving the semigroup generated by the Laplacian on ${\mathbb{R}}^n$ and that the duality of these weighted Hardy and BMO spaces holds for Muckenhoupt $A^p$ weights with $p\in (1,2]$ while the previously known related results cover only $p\in (1,\frac{n+1}{n}]$. We also point out that this two weight commutator theorem might not be true in the setting of general operators L, and in particular we show that it is not true when L is the Dirichlet Laplacian ${\mathrm{\Delta }}_{D_{+}}$ on ${\mathbb{R}}_{+}^n$.