Analysis of organotin compounds by grignard derivatization and gas chromatography-ion trap tandem mass spectrometry

The determination of organotin compounds in water using gas chromatography-tandem mass spectrometry (GC-MS-MS) is described. Several organotin derivatives were synthesized by the reaction of organotin chlorides with Grignard reagents such as methyl-, propyl- and pentylmagnesium halides. After the optimization of the GC-MS-MS conditions, several derivatizations with the Grignard reagents were compared by evaluating the molar responses and volatilities of the derivatives and derivatization yields. As a result, the derivatizing reagent of choice is pentylmagnesium bromide. Calibration curves for the mono-, di- and tributyltins and mono-, di- and triphenyltins with pentylmagnesium bromide were linear in the range of 0.5-100 pg of Sn. The instrumental detection limits of six organotins ranged from 0.20 to 0.35 pg of Sn. The recovery tests from water samples (500 ml) were performed by using sodium diethyldithiocarbamate (DDTC) as a complexing reagent. Except for monophenyltin, the absolute recoveries of organotins from pure water at 200 ng of Sn/l were satisfactory. The recoveries calibrated by surrogate compounds (perdeuterated organotin chlorides) ranged from 71 to 109%. The method detection limits ranged from 0.26 to 0.84 pg of Sn (500-ml sample). This method was applied to the recovery of organotins from river water and seawater. The calibrated recoveries were between 90 and 122%.     

Photocrosslinking of functionalized rubber. II. Photoinitiated cationic polymerization of epoxidized liquid natural rubber

Low molecular weight epoxidized natural rubber has been crosslinked within seconds by UV irradiation in the presence of a triarylsulfonium salt. The photoinitiated cationic ring-opening polymerization was studied quantitatively by infrared spectroscopy and shown to proceed with surprisingly long kinetic chains in such solid medium. The high conversion (60%) needed for complete insolubilization, together with the presence of tetrahydrofuran structures, argue in favor of an intramolecular polymerization process involving neighboring epoxy groups. The photoinitiator concentration has a strong influence on the rate and extent of the reaction, as well as on the depth of cure profile. Because of an efficient dark process, close to 100% conversion was reached upon storage of the irradiated elastomer at ambient, with a concomitant increase of the gel fraction and the polymer hardness. The grafting of pendent acrylate groups onto the polymer chain leads to a three-fold decrease of the initial rate of polymerization of the epoxide. The photocuring of natural rubber bearing both epoxy and acrylate groups generates a dual polymer network which combines the properties of the two moieties. © 1995 John Wiley & Sons, Inc.     

Adsorption of dyes on activated carbon and graphitic thermal carbon black

The adsorption of a basic dye (Methylene Blue; MB) and an acidic dye (Acid Orange; AO) has been studied on three activated carbons (ACs; FAS, SKD, and BAU) significantly differing in their porous structures and surface concentrations of ion-exchange groups and on graphitic thermal carbon black (GTCB). The effective specific surface area of FAS, SKD, and BAU determined by dye adsorption is, respectively, 60, 50, and 40% of the BET nitrogen adsorption surface area. The MB uptake on ACs and GTCB increases with rising pH, while the AO uptake decreases. Addition of an electrolyte (0.3 M NaCl) virtually does not effect the adsorption of dyes on ACs and GTCB. It is suggested that hydrophobic interactions, and not ionic ones, are the major contributors to the adsorption of dyes on ACs.     

Low frequency limits of third-order harmonic coefficients for atomic hydrogen in any level of discrete energy spectrum

In this paper the analytical expression is derived for the third-order optical harmonic coefficients x _abcd ^v (,,) of the atomic hydrogen at very low frequencies 0 in many level of the discrete energy spectrum.The author expresses his thank to Prof. Nguyen Van Hieu for suggesting the problem and fruitful discussions.     

Simultaneous Determination of Paracetamol,Ibuprofen, and Caffeine in Tablets by Molecular Absorption Spectroscopy Combined with Classical Least Square Method

In this paper, the classical least-squares (CLS) method with molecular absorption spectrophotometric measurement was used to determine simultaneously paracetamol (PAR), ibuprofen (IBU), and caffeine (CAF) in tablets. The absorbance spectra of the standard solutions and samples were measured over a wavelength from 220 to 300 nm with a 0.5 nm step. The concentration of PAR, IBU, and CAF in the sample solutions was calculated by using Visual Basic for Applications (VBA) and a program called CLS-Excel written in Microsoft Excel 2016. The method and the CLS-Excel program were tested on mixed standard laboratory samples with different PAR, IBU, and CAF concentration ratios, and they showed only small errors and a satisfying repeatability. An analytical procedure for tablets containing PAR, IBU, and CAF was developed. The reliability of the procedure was proved via the recovery and repeatability of the analysis results with an actual tablet sample and by comparing the mean contents of active substances in the tablets obtained from the analytical procedure with the HPLC method. The procedure is simple with a reduced cost compared with the HPLC standard method.     

Synthesis and Application of Epoxidized Natural Rubber

Abstract

North Vietnamese NR latexes were successfully epoxidized using peracetic acid at moderate temperature and pH range. The epoxide contents of pure epoxidized natural rubber (ENR) are from 5 to 70 mol%. The ENR products were characterized and determined by spectral and thermal analysis besides the chemical titration. Conditions of longlasting or excessive temperature, or high acidic pH led to side ring opened products, proved easily by IR, ¹H-NMR, and DSC analysis. The ENR were vulcanized using a semiefficient system. The epoxidation increased the adhesion between rubber and tire cord and metal. This effect becomes stronger beyond 25 mol% and tends to be limited at over 60 mol%. The ENRs were used to formulate special-purpose adhesives. The shear strength of the adhesive ranges from 32 to 45 kg/cm² for bonding rubber to nylon and rubber to metal, respectively.     

Perfect controlled joint remote state preparation independent of entanglement degree of the quantum channel

We construct a quantum circuit to produce a task-oriented partially entangled state and use it as the quantum channel for controlled joint remote state preparation. Unlike most previous works, where the parameters of the quantum channel are given to the receiver who can accomplish the task only probabilistically by consuming auxiliary resource, operation and measurement, here we give them to the supervisor. Thanks to the knowledge of the task-oriented quantum channel parameters, the supervisor can carry out proper complete projective measurement, which, combined with the feed-forward technique adapted by the preparers, not only much economizes (simplifies) the receiver's resource (operation) but also yields unit total success probability. Notably, such apparent perfection does not depend on the entanglement degree of the shared quantum channel. Our protocol is within the reach of current quantum technologies.