Wavelength-dependent photochemistry in Cr(CNPh)6: a study of photosubstitution and photoinduced electron transfer using time-resolved spectroscopy

The wavelength dependence of photosubstitution, photoinduced electron transfer, and the time-resolved spectra of Cr(CNPh)6, a compound having low-lying MLCT states, were investigated. Photosubstitution quantum yields increase with increasing excitation energy while photoinduced electron transfer quantum yields decrease with increasing excitation energy. At the lowest excitation energy used (532 nm, or 18,800 cm(-1)), the quantum yields for both electron transfer and photosubstitution reach the same maximum value, 0.29. Picosecond time-resolved absorption spectra at 355 and 532 nm excitation wavelengths show two features: a bleach signal centered at 400 nm and an excited state absorption (ESA) in the 600 nm region. The ESA signal is much weaker for 532 nm excitations than for 355 nm excitations. Following a 355 nm flash, the bleach and ESA decay exponentially with the same lifetime of 23 micros. This implies a simple ligand dissociation followed by recombination. Bleach recovery kinetics after a 532 nm flash are more complicated: two or three exponential components are required to fit the data. Cr(CNPh)6 exhibits two photochemical mechanisms: at high excitation energy, a simple charge neutral dissociation occurs; at low energy, it is proposed that a phenylisocyanide radical anion dissociates, forming a radical pair that is responsible for the observed substitution and electron transfer reactivity, and the complicated nanosecond kinetics. The primary processes for both reactions occur in less than 20 ps.     

Transition metalcarbon bonds XXXVII. platinum acetylide complexes formed from ethynyl alcohols or ethers

Several new platinum(II) acetylide complexes, trans-{Pt[CCCR₁R₂(OR₃)]₂-L₂} (R₁, R₂  H, Me, Et; CR₁R₂  cyclohexylidene; R₃  H, Me or Ph), trans-[Pt(CCCH₂CH₂OH)₂L₂], trans-[Pt(p-tolylacetylide)₂L₂] and trans-[PtX(p-tolylacetylide)L₂] (L  PMe₂Ph or in one case, AsMe₂Ph) have been prepared. Platinum(II) acetylide complexes with tertiary hydroxyl groups are easily dehydrated by acetic anhydride/pyridine to give platinum-enyne complexes. Analogous compounds with primary hydroxyl groups do not dehydrate but give acetates. ¹H and ¹³C NMR data are given and the shift reagent Eu(fod)₃ was used to analyse the ¹H NMR spectrum of trans-[Pt(CCCH₂CH₂OH)₂(PMe₂Ph)₂].     

Infrared spectra of gas-phase V(+)-(benzene) and V(+)-(benzene)(2) complexes

The organometallic ions V+-(benzene) and V+-(benzene)2 are produced by laser vaporization in a pulsed nozzle source. They are trapped and mass selected in an ion-trap/time-of-flight mass spectrometer, and their infrared spectra are measured with resonance-enhanced multiphoton photodissociation (IR-REMPD) spectroscopy with a tunable free-electron laser. Vibrational bands in the 600-1800 cm-1 region are characteristic of the benzene molecular moiety perturbed by the metal cation bonding. Experimental data are compared to the IR spectra derived from density functional calculations. Vibrational patterns in V+-(C6H6) indicate that the metal is bound in an eta6 pi-bonding configuration, while V+-(C6H6)2 is a sandwich. Trapped-ion IR-REMPD is a general method to access the vibrational spectroscopy of organometallic ions and their clusters.     

Detection of DNA probes using Diels Alder cycloaddition and SERRS

A number of methods for detecting specific DNA sequences have been used to provide data for use in diagnosis of disease states and examination of gene expression. This study shows how the use of labelled oligonucleotides created by Diels Alder cycloaddition can be used as surface enhanced resonance Raman scattering (SERRS) active probes that provide easily identifiable signals at low concentrations in a mixture. The probes were produced by first tagging the oligonucleotides with a furan residue at the 5'-terminus to act as the diene. Three specifically designed benzotriazole azo maleimide dyes were then used as dienophiles to undergo cycloaddition with the furan modified oligonucleotide to generate SERRS active probes. These probes gave excellent SERRS signals from a silver-PVA film. Surface mapping of the silver PVA film indicated that the distribution of the dyes was uniform and that the number of moles of probe detected at any one time was approximately in the attomole region.     

Synthetic entries to 6-fluoro-7-substituted indole derivatives

Three practical synthetic entries of functionalized 6-fluoro-7-substituted indole derivatives were developed in connection with the preparation of 7-fluoro-8-substituted-1,3,4,9-tetrahydropyrano[3,4-b]indole-1-acetic acid derivatives 11 . The first route, which permits group modification about position 8 of the pyranoindole skeleton, employs 2-bromo-3-fluoroaniline ( 18 ) as a key intermediate, the preparation of which was achieved by either a novel ortho metalation of 15 or via the intermediacy of 22 . The second route utilizes 32 to append a terminally functionalized three carbon side chain onto the indole template and in addition leads to 43 from 40 . The third route to the 7-fluoro-8-substituted-pyranoindole skeleton complements route two in that the synthetic pathway exploits 32 in a nucleophilic fashion to construct a terminally functionalized two carbon appendage onto the indole nucleus.     

Anomalous NMR behavior of meso compounds with remote stereogenic centers on addition of chiral shift reagent or chiral solvating agent

A problem has arisen in using chiral shift reagents (CSR) and chiral solvating agents (CSA) to determine meso and racemic forms of diastereoisomers in which the stereogenic centers of the molecules are separated by achiral spacers. It is found that NMR signals of both meso and racemic forms of diastereoisomers may exhibit doubling on addition of CSR/CSA, which means that unequivocal assignments cannot be made without characterizing the effects for separate meso and racemic forms; this is particularly important for additions of CSR/CSA at relatively low concentrations, which always result in the splitting of some NMR signals of diastereoisomers. The phenomenon is demonstrated in the (31)P NMR spectra of meso and racemic forms of three spermine-bridged gem-disubstituted cyclotriphosphazatrienes, 1a-c, and compared with analogous achiral molecules, the per-substituted spermine-bridged cyclotriphosphazatrienes 2a-d. As expected, only one set of (31)P NMR signals was observed for the achiral compounds 2a-d, even on addition of CSA. Two sets of (31)P NMR ABX multiplets corresponding to meso and racemic diastereoisomers were observed for compounds 1a-c; on addition of CSA, the signals of at least one of the multiplets for each compound separated into more than the expected groups of three lines with an intensity distribution of 2:1:1. To understand this phenomenon, the meso and racemic forms of 1a and 1b and the meso form of 1c have been separated and characterized by X-ray crystallography. On addition of CSA to the racemic forms of 1a and 1b, the (31)P NMR spectrum shows the expected doubling of signals, but, unexpectedly, the same is observed for each of the meso forms of 1a-c. Analogous results using both CSA and CSR have been obtained for the meso and racemic forms of the diastereoisomeric piperazine-bridged macrocyclic-phosphazene compound, 3, whereas no effect was observed for the two meso forms of the doubly bridged macrocyclic-phosphazene compound 4. The phenomenon of doubling of the (31)P NMR signals of the meso form of singly bridged cyclotriphosphazatrienes, 1a-c and 3, is explained by consideration of the equilibrium in solution of independent complexation of a chiral ligand with molecules that have two chiral cyclophosphazene moieties separated by an achiral spacer group. The results show that the stereogenicity of such diastereoisomeric molecules in solution cannot be characterized unequivocally by NMR measurements on addition of either CSR or CSA.     

A generic approach to the impurity profiling of drugs using standardised and independent capillary zone electrophoresis methods coupled to electrospray ionisation mass spectrometry

Three standardised, capillary zone electrophoresis-electrospray ionisation mass spectrometry (CZE-ESI-MS) methods were developed for the analysis of six drug candidates and their respective process-related impurities comprising a total of 22 analytes with a range of functional groups and lipophilicities. The selected background electrolyte conditions were found to be: 60/40 v/v 10 mM ammonium formate pH 3.5/organic, 60/40 v/v 10 mM ammonium acetate pH 7.0/organic and 10 mM piperidine, pH 10.5, where the organic solvent is 50/50 v/v methanol/acetonitrile. The coaxial sheath flow consisted of either 0.1% v/v formic acid in 50/50 v/v methanol/water, or 10 mM ammonium acetate in 50/50 v/v methanol/water, depending on the mixture being analysed. Factor analysis and informational theory were used to quantify the orthogonality of the methods and predict their complementarities. The three selected CZE-ESI-MS methods allowed the identification of 21 out of 22 of all the drug candidates and their process-related impurities and provided orthogonality with four established high-performance liquid chromatography-mass spectrometry (HPLC-MS) methods. These methodologies therefore form the basis of a generic approach to impurity profiling of pharmaceutical drug candidates and can be applied with little or no analytical method development, thereby offering significant resource and time savings.     

Quantitative determination of limonin in citrus juices by HPLC using computerized solvent optimization

The commercially available computer program, Drylab, for optimization of separations by high-performance liquid chromatography (HPLC) using binary solvent mixtures is used to improve an HPLC method for separation of the bitter principle, limonin, in grapefruit and navel orange juices. Best conditions for separation of limonin in a reasonable time are 30 to 32% acetonitrile in water at 0.9 mL/min using a 5-micron C18 column 10 cm long. These conditions are used to analyze grapefruit and navel orange juice samples, and these HPLC results are compared with values determined by enzyme immunoassay or thin-layer chromatography (TLC) on the same samples.     

Comparison of uncoated, pyro-coated and totally pyrolytic graphite tubes for the HGA-500 electrothermal atomiser

The analytical performance of three uncoated electrographite tubes, three pyro-coated electrographite tubes, one tantalum carbide (TaC) coated electrographite tube, and three totally pyrolytic graphite (TPG) tubes has been evaluated and compared. A test programme was devised to determine the useful operational lifetime of each tube, and assess the influence of tube age on the sensitivity of lead, manganese and vanadium measurements by atomic absorption spectrometry. The TPG tubes were found to be more durable than the other types studied, but the lifetime advantage depended on the thickness of the pyrolytic graphite. The best TPG tube, of 720 μm wall-thickness, lasted 2.5 times longer than the pyro-coated tubes, and 5 times longer than the uncoated electrographite tubes.The TPG tubes gave slightly poorer AAS sensitivity for lead, equivalent sensitivity for manganese, and 4 times better sensitivity for vanadium than the pyro-coated electrographite tubes. Also, with TPG, signal magnitude was more consistent throughout the lifetime of a tube. For each of the test elements studied, poorest sensitivity was encountered with the TaC-coated electrographite tube.