Energy potential and thermogravimetric study of pyrolysis kinetics of biomass wastes

The use of agricultural wastes for energy conversion has been widely studied as renewable and carbon neutral energy sources. This paper aims to evaluate the energetic potential of six agricultural wastes—sugarcane bagasse, bean pods, corn stover, pineapple crown leaves, white cotton and natural coloured cotton stalks, through their characterization and pyrolysis kinetic study. The energetic potential of biomasses was evaluated by ultimate and proximate analysis, higher heating value (HHV), apparent density, and kinetic parameters of conversion and apparent activation energy (E_a) determined by Model-Free kinetics though thermogravimetric analysis data. The results indicate energetic density for dry basis biomasses, such as moisture content less than 7%, volatiles higher than 77% and moderate ash content. The HHVs were higher for the biomass with low O:C ratio. The E_a values increased with increasing O:C ratio and were also influenced by the biomass ash content. Among the studied biomasses, PCL are less explored for energy application, although the results confirm its potential for application in thermochemical processes such as pyrolysis or combustion.

     

Evaluation of Polyphenols in Wine by Voltammetric Techniques with Screen Printed Carbon Electrodes

The electrochemical oxidation processes that occur during a voltammetric assay in wine samples lead to the formation of species that obstructs the surface and reduce their active area. This effect is critical for screen printed carbon electrodes (SPCE) and leads to abnormal low values of the total polyphenols content of wines, ca. 72 % lower than those obtained with glassy carbon electrodes. This effect was examined using 10 red and Port wine samples. Mechanical polishing and electrochemical‐based treatments for the removal of this fouling layer were tested. The best results were obtained by electrochemical activation in at a constant potential of 1.2 V during 100 s Na₂CO₃ saturated solution, and by polishing. The success of some of these treatments brings an added value to SPCE, as it opens the possibility of their reuse in the wine analysis. This outcome is particularly relevant for quality control where a huge number of analysis is performed and the reduction of cost may dictates the choice of the analytical method.     

Catalytic and antibacterial evaluation of silver nanoparticles synthesized by a green approach

In this work, silver nanoparticles were synthesized using Salvia microphylla Kunth leaves extract as reducing agent and stabilizing agent. The effect of reaction time and plant extract amount on the biosynthesized nanoparticles were studied. The UV–Vis spectrum indicated that silver nanoparticles show a characteristic surface plasmon resonance at 427 nm. X-ray diffraction experiments show that the silver nanoparticles have a face-centered cubic crystal structure. The density of nanoparticles increases with increasing extract concentration and reaction time. TEM and SEM observations showed well-dispersed quasi-spherical nanoparticles sized in the range of 15–45 nm. The FT-IR analysis suggested the involvement of phenolic compounds in the reduction and stabilization of silver nanoparticles. Synthesized silver nanoparticles showed good antibacterial activity against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. Finally, the catalytic properties of silver nanoparticles were demonstrated through the degradation of congo red and methyl orange.     

Preparation and characterization of boron-based bioglass by sol−gel process

45S5 bioglass has been widely studied in the last few decades because of its bioactivity and promising applications in the biomedical field. Boron, even few studied, represents a potential element to improve the properties of the 45S5 bioglass derivatives. The bioglasses are conventionally prepared by heat treatment of oxides and silicon. Here, the sol?gel method is proposed for the preparation of the boron-based 45S5 bioglass (45S5B) and the classical 45S5 bioglass (45S5), using water-soluble salts as raw materials. The bioglasses were characterized by FTIR, XRD, and SEM, indicating the success of the sol?gel method for preparation of the samples. The bioglasses were also tested in vitro for bioactivity in biological conditions and cytotoxicity against eukaryotic cells. The bioactivity of 45S5B was similar to the bioactivity of 45S5 bioglass, indicated by the deposition of hydroxyapatite crystals at the surface of the pristine bioglasses. The results of cytotoxicity tests revealed that the IC₅₀ of 45S5B (IC₅₀?=?7.56?mg?mL^?1) was similar to the IC₅₀ of 45S5 (IC₅₀?=?8.15?mg?mL^?1), indicating its safety for application in the biomedical field.

Open image in new window

     

Electrocatalytic Oxidation of 5‐(Hydroxymethyl)furfural Using High‐Surface‐Area Nickel Boride

The electrochemical oxidation of the biorefinery product 5‐(hydroxymethyl)furfural (HMF) to 2,5‐furandicarboxylic acid (FDCA), an important platform chemical for the polymer industry, is receiving increasing interest. FDCA‐based polymers such as polyethylene 2,5‐furandicarboxylate (PEF) are sustainable candidates for replacing polyethylene terephthalate (PET). Herein, we report the highly efficient electrocatalytic oxidation of HMF to FDCA, using Ni foam modified with high‐surface‐area nickel boride (Ni_xB) as the electrode. Constant potential electrolysis in combination with HPLC revealed a high faradaic efficiency of close to 100 % towards the production of FDCA with a yield of 98.5 %. Operando electrochemistry coupled to ATR‐IR spectroscopy indicated that HMF is oxidized preferentially via 5‐hydroxymethyl‐2‐furancarboxylic acid rather than via 2,5‐diformylfuran, which is in agreement with HPLC results. This study not only reports a low‐cost active electrocatalyst material for the electrochemical oxidation of HMF to FDCA, but additionally provides insight into the reaction pathway.     

Ferrocenyl,Alkyl, and Aryl‐Pyrido[2,3‐d]Pyrimidines as Vasorelaxant of Smooth Muscle of Rat Aorta via cAMP Conservation Through Phosphodiesterase Inhibition

New pyrido[2,3‐d]pyrimidines 11 , 12 , 13 , and 21 have been synthesized. The vasorelaxant effect on smooth muscle isolated from rat aorta, via PDEs inhibition, of these compounds along with other pyrido[2,3‐d]pyrimidines 14 , 15 , 16 , 17 , 18 , 19 , 20 reported earlier by our group, has also been determined. These pyrido[2,3‐d]pyrimidines 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 were synthesized by the reaction of ferrocenyl‐ethynyl ketones ( 1 , 2 , 3 , 4 ) or α‐alkynyl ketones ( 5 , 6 , 7 , 8 , 9 , 10 ) with 6‐amino‐1,3‐dimethyluracil using [Ni(CN)₄]^?4 as an active catalytic species, formed in situ in a Ni(CN)₂/NaOH/H₂O/CO/KCN aqueous system. Evaluation of the vasorelaxant effect of compounds 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 demonstrated that all compounds relax the tissue in a concentration‐dependent manner. The structural changes do not alter the effectiveness; however, there are differences related to potency expressed as EC₅₀. Compounds 12 (7‐ferrocenyl‐1,3‐dimethyl‐5‐(m‐tolyl)‐pyrido[2,3‐d]pyrimidine) and 13 (7‐ferrocenyl‐1,3‐dipropyl‐5‐(4‐metoxyphenyl)‐pyrido[2,3‐d]pyrimidine) were the most potent compounds, even more than rolipram, reference drug; the EC₅₀ was 0.41 ± 0.02 μM and 0.81 ± 0.11 μM for 12 and 13 , correspondingly. The EC₅₀ of compounds 15 (7‐ferrocenyl‐1,3‐dimethyl‐5‐phenyl‐pyrido[2,3‐d]pyrimidine), 14 (7‐ferrocenyl‐5‐(3,5‐dimethoxyphenyl)‐1,3‐dimethylpyrido[2,3‐d]pyrimidine), and 19 (5‐n‐butyl‐7‐ethyl‐1,3‐dimethylpyrido[2,3‐d]pyrimidine) was similar to EC₅₀ of rolipram. Compounds 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 significantly induce concentration‐dependent vasorelaxation in endothelium‐intact aortic rings. In addition, the relaxation responses to each compound in either endothelium‐intact or endothelium denuded aortic rings were comparable, suggesting that removal of the functional endothelium has no significant influence on its intrinsic vasorelaxant activity. In vitro capability of conserving cyclic‐AMP or cyclic‐GMP (adenosine and guanosine 3′, 5′‐cyclic monophosphate) via PDE inhibition for compounds 12 , 13 , 14 , 15 and 19 was evaluated. Compounds 15 and 19 show the highest percent inhibition effect (94.83% and 83.98%, respectively) for the decomposition of c‐AMP. Docking studies showed that the compound 15 was selective for the inhibition of PDE‐4.     

Transition metal bisdithiolene complexes based on extended ligands with fused tetrathiafulvalene and thiophene moieties: new single-component molecular metals

The gold and nickel bisdithiolene complexes based on new highly extended ligands incorporating fused tetrathiafulvalene and thiophene moieties (alpha-tdt=thiophenetetrathiafulvalenedithiolate and dtdt=dihydro- thiophenetetrathiafulvalenedithiolate), were prepared and characterised by using cyclic voltammetry, single crystal X-ray diffraction, EPR, magnetic susceptibility and electrical transport measurements. These complexes, initially obtained under anaerobic conditions as diamagnetic gold monoanic [nBu(4)N][Au(alpha-tdt)(2)] (4), [nBu(4)N][Au(dtdt)(2)] (3) and nickel dianionic species [(nBu(4)N)(2)][Ni(alpha-tdt)(2)] (8), [(nBu(4)N)(2)][Ni(dtdt)(2)] (7), can be easily oxidised to the stable neutral state just by air or iodine exposure. The monoanionic complexes crystallise in at least two polymorphs, all of which have good cation and anion segregation in alternated layers, the anion layers making a dense 2D network of short SS contacts. All of the neutral complexes, obtained as microcrystalline or quasi amorphous fine powder, present relatively large magnetic susceptibilities that correspond to effective magnetic moments in the range 1-3 mu(B) indicative of high spin states and very high electrical conductivity that in case of the Ni compound can reach sigma(RT) approximately 250 S cm(-1) with a clear metallic behaviour. These compounds are new examples of the still rare single-component molecular metals.     

Electrocyclic [1,5] hydrogen shift in the thermal elimination kinetics of phenyl acetate and p-tolyl acetate in the gas phase: a density functional theory study

The kinetics and mechanisms of thermal decomposition of phenyl acetate and p-tolyl acetate in the gas phase were studied by means of electronic structure calculations using density functional theory methods: B3LYP/6-31G(d,p), B3LYP/6-31++G(d,p), B3PW91/6-31G(d,p), B3PW91/6-31++G(d,p), MPW1PW91/6-31G(d,p), MPW1PW91/6-31++G(d,p), PBE/6-31G(d,p) and PBE/6-31++G(d,p). Two possible mechanisms have been considered: mechanism A is a stepwise process involving electrocyclic [1,5] hydrogen shift to eliminate ketene through concerted six-membered cyclic transition-state structure, followed by tautomerisation of cyclohexadienone or by 4-methyl cyclohexadienone intermediate to give the corresponding phenol. Mechanism B is a one-step concerted [1,3] hydrogen shift through a four-membered cyclic transition-state geometry, to produce ketene and phenol or p-cresol. Theoretical calculations showed reasonable agreement with experimental activation parameters when using the Perdew, Burke and Ernserhof (PBE)functional, through the stepwise [1,5] hydrogen-shift mechanism. For mechanism B, large deviation for the entropy of activation was observed. No experimental data were available for p-tolyl acetate; however, theoretical calculations showed similar results to phenyl acetate, thus supporting the stepwise mechanism for both phenyl acetate and p-tolyl acetate.     

Pilot scale-up and shelf stability of hydrogel wound dressings obtained by gamma radiation

This study is aimed of producing pilot batches of hydrogel wound dressings by gamma radiation and evaluating their shelf stability. Six batches of 3L capacity were prepared based on poly(vinyl pyrrolidone), agar and polyethylene glycol and they were dispensed in polyester trays, covered with polyester films and sealed in two types of materials: polyethylene bags and vacuum polyethylene bags. Dressings were formed in a single step process for the hydrogel formation and sterilization at 25–30 kGy gamma radiation dose in a JS-9500 Gamma Irradiator (Nordion, Canada). The six batches were initially physicochemical characterized in terms of dimensions and appearance, gel fraction, morphology analysis, hydrogel strength, moisture retention capability and swelling capacity. They were kept under two storage conditions: room temperature (T: 30±2 °C/RH: 70± 5%) and refrigerated temperature (T: 5±3 °C) during 24 months and sterility test was performed. The appearance of membranes was transparent, clear, uncut and flexible; the gel fraction of batches was higher than 75% and the hydrogel surface showed a porous structure. There was a slow decrease of the compression rate 20% until 7 h and about 70% at 24 h. Moisture retention capability in 5 h was similar for all the batches, about 40% and 60% at 37 °C and at room temperature respectively. The swelling of hydrogels in acidic media was strong and in alkaline media the weight variation remains almost stable until 24 h and then there is a loss of weight. The six batches remained sterile during the stability study in the conditions tested. The pilot batches were consistent from batch to batch and remained stable during 24 months.