pH-dependent electrochemical behaviour of hydrophilic ampholytic membranes

Ampholytic membranes were synthesized by copolymerizing (2-hydroxyethyl)methacrylate as the hydrophilic component, methacrylic acid and (N,N-diethylaminoethyl)methacrylate as ionogenic components (both ionogenic monomers in amounts 2.5 mol% or 10 mol%), and ethylenedimethacrylate as the crosslinking agent (3,5 or 10 mol%). The effects of pH on the swelling and membrane potentials of the membranes were investigated. The dependence of the membrane potentials on pH is characterized by the position of the isoelectric point and by the slope of the straight part of the dependence. This slope reflects the attained degree of ideality of the membrane. By varying the degree of cross linking and the content of ionogenic components, it is possible to vary the pH-dependent response of the membranes.     

Loss of light stabilizers from polypropylene

Loss of light stabilizers. related to 2-hydroxybenzophenone and 2-(2-hydroxyphenyl) benzotriazole. from isotactic polypropylene was measured over the range 60–120° and during storage at 25'. The light stabilizer content in polypropylene corresponded to that used in practice. The rate constants and the activation energy were calculated from the rate of loss. The influence of the structure of stabilizer on the rate of loss from polymer is discussed. The losses of stabilizers from polymer were compared with the vapour pressure of stabilizers and with the losses of stabilizers alone at 280. The rate of diffusion of stabilizers to the surface of polypropylene and the rate of even evaporation may cause a rapid diminution of stabilizer or undesirable accumulation on the polymer surface.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

Analytische Bestimmung von Niob,Tantal, Phosphor,Chlorid und 2,2-Dipyridyl in einigen Komplexverbindungen

Zusammenfassung Die analytische Bestimmung der Metalle, des Dipyridyls und der Chloride in Oxo-chloro-alkoxo-dipyridyl-Komplexverbindungen des Niobs und Tantals wurde beschrieben. Eine modifizierte Methode der Dipyridylanalyse, wie auch der Chloridbestimmung in Gegenwart von Dipyridyl wurde angegeben. Die radiometrische Metallbestimmung in Extraktionsverbindungen von Niob und Tantal mit Di-oktyl-methylenbis-phosphonsäure wurde dargelegt.

---

Summary The analytical determination of metals, dipyridyl and chlorides in oxochloro-alkoxo-dipyridyl complex compounds of niobium and tantalum is described. A modified procedure of the dipyridyl analysis and also of the determination of chloride in the presence of dipyridyl is given. The radiometric determination of the metals in extraction compounds of niobium and tantalum with di-octyl-methylene-bis-phosphonic acid is discussed.

---

Résumé On décrit le dosage des métaux, du dipyridyle et des chlorures dans les composés complexes oxo, chloro, alcoxo, dipyridyle, du niobium et du tantale. On indique une méthode modifiée pour le dosage de dipyridyle ainsi que pour la détermination des chlorures, en présence de dipyridyle. On décrit le dosage radiométrique des métaux dans les produits d'extraction du niobium et du tantale par l'acide di-octyl-méthylène-bis-phosphonique.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.     

Kinetic determination of ultramicro amounts of copper

A new catalytic reaction is proposed and a kinetic method developed for the determination of ultramicro amounts of Cu(II) on the basis of its catalytic activity in oxidation of the 2-thiosemicarbazone of sodium 1,2-naphthoquinone-4-sulphonate by hydrogen peroxide in the presence of ascorbic acid. Under optimal conditions the sensitivity of the method is 0.25 ng/ml. The relative error is 4.8-18.2% for the concentration range 5-0.8 ng/ml. Most foreign ions do not change the rate of the catalysed reaction. Co(2+) and I(-) catalyse the reaction, Ni(2+) extensively inhibits it, and in the presence of EDTA only the uncatalysed reaction takes place.     

Highest-weight representations ofsl(2, ℂ) andsl(3, ℂ) via canonical realizations

The infinite-dimensional representations of thesl(n+1, ) Lie algebras (maximal representations) constructed in our previous paper are studied on the two simplest examplesn = 1,2. The sufficient condition for irreducibility of the maximal representations is proved to be also necessary in these cases. It is further shown, that our method allows us to construct other set of infinite-dimensional highest-weight representations ofsl(3, ), so calledmixed representations which are irreducible in some cases when the maximal as well as the standard highest-weight representations (Verma modules) are reducible.Dedicated to the 25th anniversary of the Joint Institute for Nuclear Research.The authors are grateful to Prof. A. A. Kirillov, Dr. A. U. Klimyk, Dr. W. Lassner and Prof. D. P. Zhelobenko for stimulating discussions.     

Thermoactivated creep and stress relaxation in Cd + 0·08 at% Sn single crystals

The activation area of plastically deformed Cd + 0·08 at% Sn single crystals was determined from differential creep test and stress relaxation at temperatures 78 K, 200 K and 295 K. The activation areaA depends on the resolved shear stress, ,A ^{* –r} wherer is dependent on temperature and the testing method used. For temperatures above 0·3T _m recovery during stress relaxation should be considered.     

Transient absorption and laser output of YAG : Nd

YAG : Nd grown under 98% Ar 2% H₂ protective atmosphere free of nitrogen or hydrocarbons showed after UV irradiation broad absorption peaked at 1·9×10⁴ cm^–1 which disappeared relatively slowly at room temperature. It was more intensive in oxygen treated samples than in those annealed in hydrogsn. Transient absorption suppresses laser output by the increase of absorption at 0·94×10⁴ cm^–1 (1064 nm) and, particularly in CW mode, by the anomalous rod deformation. YAG : Nd containing Fe ions (2·10^–4 wt%) showed no transient absorption.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.