调强放射治疗子野权重优化方法研究

由于子野分割带来的误差, 使得调强放疗(Intensity Modulated Radiation Therapy, 简称IMRT)计划系统所制作的计划往往不能满足临床要求。 本研究将采用基于共轭梯度法的子野权重优化方法来减小此误差, 提高制作计划的效率和效果。 采用共轭梯度法优化子野权重和微调子野形状, 最终使得子野分割前后强度误差最小。 在精确放疗系统中对常见的临床病例（鼻咽癌和周围性肺癌）进行测试, 通过对比靶区和危及器官的剂量体积直方图以及CT片上的等剂量线, 发现子野权重优化后靶区的平均剂量分别从87.0%提高到100.2%和从90.0%提高到98.4%, 更好地满足临床要求。     

级联电磁带隙结构对双频微带天线互耦的影响

一种均匀面片尺寸的图钉型电磁带隙结构只能实现一个表面波带隙,而将不同参数的图钉型电磁带隙结构级联可以实现多个或宽带的表面波带隙。利用不同金属面片尺寸的图钉型电磁带隙结构级联的方法实现双带的表面波带隙。设计两种均匀的电磁带隙结构,使其带隙范围分别覆盖天线的两个工作频带,然后将这两种结构级联起来,加载于两个缝隙天线单元之间。仿真分析和实验结果表明,级联型的电磁带隙结构可以有效抑制表面波,在两个频率带内同时减小互耦。     

免跟踪透射式太阳聚光器的设计

针对目前太阳聚光器中因为自动跟踪系统故障率高导致使用成本大幅度增加的主要制约因素,在多年来探讨有效提高太阳能密度的基础上,提出了免跟踪线性菲涅尔透射式太阳聚光器设计的新思路,并对其结构形式和工作原理进行了阐述.     

Nonadditivity in moments of inertia of high-K multiquasiparticle bands

The experimental high-K 2-and 3-quasiparticle bands of well deformed rare-earth nuclei are analyzed.It is found that there exists significant nonadditivity in moments of inertia(MOIs)for these bands.The microscopic mechanism of the rotatiohal bands is investigated by the particle number conserving(PNC)method in the frame of cranked shell model with pairing.in which the blocking effects are taken care of exactly.The experimental rotational frequency dependenEe of these bands is well reproduced in PNC calculations.The nonadditivity in MOIs originates from the destructive interference between Pauli blocking effects.     

Multi-objective optimization of inverse planning for accurate radiotherapy

The multi-objective optimization of inverse planning based on the Pareto solution set, according to the multi-objective character of inverse planning in accurate radiotherapy, was studied in this paper. Firstly,the clinical requirements of a treatment plan were transformed into a multi-objective optimization problem with multiple constraints. Then, the fast and elitist multi-objective Non-dominated Sorting Genetic Algorithm (NSGA-Ⅱ)was introduced to optimize the problem. A clinical example was tested using this method. The results show that an obtained set of non-dominated solutions were uniformly distributed and the corresponding dose distribution of each solution not only approached the expected dose distribution, but also met the dosevolume constraints. It was indicated that the clinical requirements were better satisfied using the method and the planner could select the optimal treatment plan from the non-dominated solution set.     

水基切伦科夫μ子探测器的研究

利用高速带电粒子在透明介质中产生切伦科夫辐射的特性,以蒸馏水作为辐射介质,搭建了一个小尺寸(π×22.52cm2×45 cm)的切伦科夫探测器,对能量在GeV量级的μ子进行了相应的测量,考虑其他能量损耗、光传输和收集效率、阴极量子效率后,实验结果与理论估计值有比较高的相符度,可以初步断定仪器具备探测GeV量级μ子的能力.     

Study on the bubble transport mechanism in an acoustic standing wave field

The use of bubbles in applications such as surface chemistry, drug delivery, and ultrasonic cleaning etc. has been enormously popular in the past two decades. It has been recognized that acoustically-driven bubbles can be used to disturb the flow field near a boundary in order to accelerate physical or chemical reactions on the surface. The interactions between bubbles and a surface have been studied experimentally and analytically. However, most of the investigations focused on violently oscillating bubbles (also known as cavitation bubble), less attention has been given to understand the interactions between moderately oscillating bubbles and a boundary. Moreover, cavitation bubbles were normally generated in situ by a high intensity laser beam, little experimental work has been carried out to study the translational trajectory of a moderately oscillating bubble in an acoustic field and subsequent interactions with the surface. This paper describes the design of an ultrasonic test cell and explores the mechanism of bubble manipulation within the test cell. The test cell consists of a transducer, a liquid medium and a glass backing plate. The acoustic field within the multi-layered stack was designed in such a way that it was effectively one dimensional. This was then successfully simulated by a one dimensional network model. The model can accurately predict the impedance of the test cell as well as the mode shape (distribution of particle velocity and stress/pressure field) within the whole assembly. The mode shape of the stack was designed so that bubbles can be pushed from their injection point onto a backing glass plate. Bubble radial oscillation was simulated by a modified Keller–Miksis equation and bubble translational motion was derived from an equation obtained by applying Newton’s second law to a bubble in a liquid medium. Results indicated that the bubble trajectory depends on the acoustic pressure amplitude and initial bubble size: an increase of pressure amplitude or a decrease of bubble size forces bubbles larger than their resonant size to arrive at the target plate at lower heights, while the trajectories of smaller bubbles are less influenced by these factors. The test cell is also suitable for testing the effects of drag force on the bubble motion and for studying the bubble behavior near a surface.     

不同湍流模型对热等离子体射流模拟的影响

本文应用大气压等离子体射流传热与流动的三维数学模型,在相同初始条件下,计算得到了采用不同湍流模型时氩等离子体射流对称轴线上的温度、速度及空气质量分数分布,并与文献中同等条件下的实验结果进行了比较,结果表明采用标准κ-ε模型和Realizableκ-ε模型时与实验结果相差较大,而采用RNGκ-ε湍流模型时模拟结果与实验数...     

A study of Eu2O3, Sc2O3 co-doped tungsten matrix impregnated cathode

Eu₂O₃ and Sc₂O₃ co-doped W matrix impregnated cathodes have been prepared by the powder metallurgy method. The constitution of active elements on activated cathode surface is analyzed by in-situ Auger electron spectroscopy. It is found that although Eu exists in the matrix, no Eu is found on the cathode surface due to the formation of a stable Eu containing compound. Sc, Ba and O diffuse to the surface of the cathode and form an active surface layer during the activation period whereas the stable Eu-compound cannot liberate free Eu, which can diffuse from the cathode to the surface. The active substance of Sc, Ba and O on the cathode surface contribute to the emission property.