柔性有机场效应晶体管研究进展

柔性有机场效应晶体管具有可折叠、质量轻、低成本等优点,在柔性显示、柔性传感器、柔性射频标签和柔性集成电路等方面显示了广阔的应用前景.本文在介绍柔性有机场效应 晶体管最新研究进展的基础上, 总结了柔性有机场效应晶体管的器件结构和柔性有机场效应晶体管所使用的衬底材料、 栅绝缘层材料、有源层材料及电极材料, 阐述了柔性有机场效应晶体管的制备工艺, 并讨论了不同的弯曲方式对柔性有机场效应晶体管性能的影响, 最后总结和展望了柔性有机场效应晶体管的应用领域. 关键词： 柔性 晶体管 有机/聚合物 溶液加工     

110kV冷绝缘高温超导电缆在故障电流下的温度计算与分析

研究了110kV冷绝缘高温超导电缆失超时,故障电流的分流情况,并以此为依据,建立了电缆在故障电流下失超时,温升与时间关系的计算模型;通过MATLAB对计算模型进行了求解,并对求解结果进行了分析;计算出了电缆在不同故障电流下,温度上升到不同值所需要的时间,进一步明确了故障电流的大小对电缆温升的影响。     

直流稳压电源波形演示器制作说明

直流稳压电源可以将交流电压变换为直流电压,并使之稳定,在我们现实生活中应用很广泛,在实验中我们利用的电学知识,设计制造了一种直流稳压电源。本文简要介绍了这种直流稳压电源波形演示器的设计目的和电路原理,重点阐述了它的制作流程、滤波和稳压原理以及性能测试输出波形。     

The Ansatz Method for Analyzing Schrödinger’s Equation with Three Anharmonic Potentials in D Dimensions

In this letter, by applying a suitable ansatz to the wave functions, the solutions of the D-dimensional radial Schrödinger equation with some anharmonic potentials are obtained.     

高功率速调管聚焦磁场设计研究

 国产45 MW速调管是在原国产30 MW HK-1型速调管的基础上改进和发展起来的,其聚焦磁场设计也是参照30 MW速调管聚焦磁场设计并在其基础上加工改造完成。为此必须对旧聚焦系统进行改造,设计出符合需要的磁场分布,以满足45 MW速调管工作的需要。首先从理论上找出速调管工作时的理想磁场值,根据该磁场分布设计出相应的线圈结构;其次根据45 MW速调管的结构尺寸,对30 MW速调管的线圈支架进行改造,利用旧线圈和新支架组成新的聚焦系统;最后,根据理论模拟和测试结果,调整和优化各组线圈的电流值,给出速调管工作时的各组聚焦电源运行参考值。叙述了新聚焦线圈的理论设计和测试分析,包括新线圈支架的设计、水冷系统与线圈的结构安排和整体的测试结果,最后根据速调管高功率测试运行状态给出速调管工作时的聚焦线圈电流的参考值。     

高温超导薄膜微波非线性研究的进展

文章介绍了高温超导薄膜微波非线性的主要特征，阐述了高温超导薄膜微波非线性产生的原因和相关的研究现状，指出了高温超导薄膜非线性研究中遇到的困难和尚未解决的问题．     

类氦离子的KLL双电子复合过程的相对论理论研究

在相对论多组态Dirac-Fock理论基础上，发展了计算双电子复合截面的程序.并以类锂C³⁺，Ar¹⁵⁺，Kr³³⁺和U⁸⁹⁺等离子为例，详细计算了共振双激发态1s2l2l′的辐射衰变率、Auger衰变率及相应的双电子复合截面.对于C⁴⁺，Ar^l6+和Kr³⁴⁺离子的结果与已有的计算和实验结果都能很好地符合；对于U⁹⁰⁺离子，则重点 关键词： 双电子复合 截面 MCDF     

Two-axis-scanning laser Doppler vibrometer for precision engineering

Laser Doppler vibrometer (LVD) has been the most favorite instrument for precision dynamics measurement due to its non-contact, high accuracy and high resolution. However, LDV can only give the dynamic data of a particular location on the entire feature. In order to get the whole field data, a laser beam-scanning mechanism has to be implemented. Currently, motor-driven scanning mirror is used to move the measurement probe from one point to another. The mechanical vibrations of the scanning mirror will reduce the measurement accuracy. This paper introduces a novel scanning LDV optical system embodied in an acousto-optic deflector scanning mechanism. It can improve the measurement accuracy since there is no mechanical motion involved. One main advantage of this system is that it generates a laser scanning beam in parallel that is different from the beam scanning in the conventional scanning laser Doppler vibrometer (SLDV). The new system has a board scanning range. The measurement target size ranges from few tens of millimeters down to 10 μm. We have demonstrated the capability of the novel system on scanning measurements of features as big as ultra-precision cutting tool to features as tiny as AFM cantilever. We believe that the novel SLDV will find profound potential applications in the precision engineering field.     

Cr,Nd:YAG self-Q-switched laser with high efficiency output

The high efficient laser performance of self-Q-switched laser in the co-doped Cr⁴⁺,Nd³⁺:YAG microchip with 1.8 mm thickness was demonstrated. The slope efficiency is varied with the reflectivity of output coupler at 1064 nm, and the highest slope efficiency of 26% was obtained for 95% reflectivity of output coupler at 1064 nm. The pulse width, the single pulse energy and the pulse repetition rate for different reflectivity of the output couplers were measured, and the experimental results agree with the numerical calculations of the passively Q-switched rate equations. This can lead to develop the diode laser pumped monolithic self-Q-switched solid-state microchip lasers, especially for the intracavity frequency-doubled solid-state microchip lasers.     

Diode-pumped 671 nm laser frequency doubled by CPM LBO

A design of diode-pumped high-efficiency Nd:YVO₄/LBO red laser is reported. Using critical phase-matching (CPM) LBO, 671 nm red laser was obtained from 1342 nm light by intracavity frequency doubling. With an incident pump laser of 800 mW, using type-I and type-II CPM LBO, 97 and 52 mWTEM₀₀ mode red laser outputs were obtained, with optical-to-optical conversion efficiencies of up to 12.1% and 6.5%, respectively.