Improved Flexural Strength of N-Vinyl-Pyrrolidone Modified Acrylic Acid Copolymers for Glass-Ionomers

Abstract

The flexural strengths of N-vinylpyrrolidone modified glass-ionomer cements were investigated. The optimal molar ratio of the monomers in copolymers, composed of the three components acrylic acid, itaconic acid and N-vinylpyrrolidone, was determined using a SAS statistical program. The copolymers were prepared using a free-radical polymerization process. The viscosities of aqueous solutions of these polymers were determined. Cements were formed by the reaction of these solutions with glass particles. Flexural strength (FS) was used as the basic screening property to find the optimum molar ratio. Statistical models were applied to predict the optimum molar ratios. All strength values were recorded on the specimens conditioned in distilled water at 37°C for 7 days. The optimal molar ratio for these copolymers was 7:1:3 for poly(acrylic acid-co-itaconic acid-co-N-vinylpyrrolidone), based on flexural strength and viscosity. The effect of molecular weight (MW) on FS was also evaluated. Copolymer with a MW of 10, 800 (M_n) showed 85% higher FS than the Ketac-Molar (KM) system, along with a reasonable working viscosity.     

Design and Performances of a Carbon Monoxide Sensor Using Mid-Infrared Absorption Spectroscopy Technique at 4.6 µm

Based on infrared absorption spectroscopy technique, a carbon monoxide sensor was developed using the fundamental absorption band of carbon monoxide molecule at the wavelength around 4.6 µm. The developed sensor consists of pulse-modulated wideband incandescence, open ellipsoid light-collector gas-cell, dual-channel detector, and control and signal-processing module. With the prepared standard carbon monoxide gas sample, sensing characteristics on carbon monoxide were investigated using the sensor. Experimental results reveal that the limit of detection is about 10 ppm, the relative error at the limit of detection point is less than 14%, and that is less than 7.8% within the low concentration range of 20～180 ppm. The maximum absolute errors of 50 min long-term measurement on the 0 and 14 ppm CO gas samples are about 3 and 3.17 ppm, respectively, and the standard deviations are as small as 0.18 and 1.25 ppm, respectively. Compared with the reported carbon monoxide detection systems utilizing quantum cascaded lasers and distributed feedback lasers, the proposed sensor shows potential applications in carbon monoxide detection under the circumstances of coal-mine and environmental protection, by virtue of high performance, low cost, simple optical structure, and so on.     

Microwave-Assisted Mannich Reaction of 2-Hydroxy-chalcones

A series of Mannich base derivatives of 2-hydroxy-chalcones were obtained expediently in good to excellent yields by microwave-assisted Mannich reaction. The regioselectivity of the reaction occurred preferentially at the C-3 position of the 2-hydroxy-chalcone backbone. In comparison with conventional results, results from microwave possesses give better yields in shorter times. Further vasorelaxation assay showed that 2-hydroxy-3-((4-methylpiperazin-1-yl)methyl)-4,6-dimethoxymethoxy-3′-bromo-chalcone 8 significantly decreased maximal PE-induced contraction (Emax = 100 ± 5.97%, EC₅₀ = 10.2 ± 0.51 µM).     

Infrared Responsive Choline Phosphate Lipids for Synergistic Cancer Therapy

Choline phosphate lipids have been designed and developed as new-generation zwitterionic nanocarriers with excellent biocompatibility and bioorthogonality to provide a more programmable performance for cancer therapy. However, there is a lack of spatiotemporal and reversible control for drug release at target tumor cells, which can lead to severe adverse effects to normal tissue and discounted treatment outcome. Here, light-inducible Lip-cRGDfk/ICG/Dox liposomes were developed for synergistic cancer therapy. ICG can effectively convert light energy into selective heating in a local environment upon laser irradiation, thus inducing thermal ablation of tumor cells, and further reversibly trigger the spatiotemporal release of anticancer drugs (Dox) at tumor cells due to the conformation transformation of CP lipids to synergistically kill tumor cells. That Lip-cRGDfk/ICG/Dox exhibited a significant improvement for breast cancer therapy in vitro and in vivo is also demonstrated, thus it can serve as an efficient platform to noninvasively and spatiotemporally control the activation of cytotoxicity at tumor cells for precision cancer therapy.     

Effects of Cr and V impurities on cohesion properties of Pd/TiAl interfaces

First principles calculations reveal that for Pd/TiAl interfaces the substitution of interface Ti atoms with Cr or V atoms is energetically favorable with negative heat of formation, and could bring about a very small increase of interface bond strength, while the interstitial Cr and V atoms should be unfeasible with highly positive heat of formation and would increase the bond lengths of interface Pd–Al and Pd–Ti bonds. Calculations also demonstrate that both Cr and V would induce an increase of interface energy, suggesting that the impurity atoms of Cr or V should be reduced to a minimum level, in order to get a thermally stable Pd/TiAl interface with a longer lifetime. In addition, it is found that the substitution of V at the Pd/TiAl interfaces should be much easier than that of Cr, which is in good agreement with similar experimental observations in the literature.     

不同尺寸的NdFeB稀土永磁体热退磁行为研究

针对不同类型及不同尺寸的两类NdFeB永磁体分别研究了它们随温度变化的热退磁行为。采用样品的整体剩余磁通来表征热退磁过程中磁体性能的变化。结果表明,Pc较小的永磁体温度稳定性较差,随温度的升高,样品的剩余磁通迅速衰减;Pc<<0.1的普通型永磁体,温度为100℃时样品的剩余磁通损失超过60%。高矫顽力型永磁体比普通型磁体具有更优越的温度稳定性和高温性能。温度升高主要导致磁体矫顽力降低,140℃时普通型磁体的矫顽力降低约80%,而高矫顽力型磁体的矫顽力只降低了约20%。     

Aromatic amine‐terminated polysulfide oligomer: Synthesis and application in self‐healable polyurea

The dynamic chemistry of disulfide bonds has emerged as one of the most powerful tools used for the fabrication of organic compounds and self‐healing materials. In this article, a novel aromatic amine‐terminated polysulfide oligomer is first synthesized from thiol‐terminated polysulfide oligomer and bis(4‐aminophenyl) disulfide via disulfide metathesis mechanism. The resulting oligomer is confirmed by FTIR and ¹H NMR spectra and then successfully applied in constructing self‐healable polyurea material (A‐LP23‐I), which combines the advantages of higher strength of polyureas and excellent self‐healing ability of polysulfide‐based materials. After subjecting to a temperature of 75 °C for 48 h, both the tensile strength and ultimate elongation of A‐LP23‐I restore to more than 90% of the original values (3.32 MPa and 396%). This study demonstrates a novel strategy for synthesizing aromatic amine‐terminated oligomer. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1460–1466     

简单方法制备与表征新颖复合凝胶及表面微结构——由科研成果转化的化学综合实验

材料表面的微结构会赋予材料独特的性能，水凝胶在生物医学领域有广泛的应用前景。采用紫外光刻蚀法创新性地实现了复合凝胶的制备和凝胶表面图案化微结构的构筑一步完成；通过原子力显微镜和光学显微镜的表征，复合凝胶聚N-异丙基丙烯酰胺/聚乙二醇二丙烯酸酯兼具了温敏性能与图案化微结构的新颖性能结构特征。本实验有助于培养学生的创新意识，激发学生的学习兴趣以及未来从事科研的兴趣。