Stress relaxation and viscosity of a bulk Pd<Subscript>40</Subscript>Cu<Subscript>30</Subscript>Ni<Subscript>10</Subscript>P<Subscript>20</Subscript> metallic glass under isochronous heating conditions

Isochronous relaxation of tensile stresses is measured in a bulk Pd₄₀Cu₃₀Ni₁₀P₂₀ metallic glass in the initial state and after certain thermal treatments. The results of measurements are used to find the energy spectrum of irreversible structural relaxation, from which the temperature dependence of shear viscosity is then calculated. This dependence is also found independently from measurements of creep in the same glass. The calculated viscosity is shown to agree well with the experimental data.     

Use of ultrafine-dispersed nanodiamond for selective deposition of boron-doped diamond films

A suspension of ultrafine-dispersed nanodiamond was used for introducing (in particular, selectively) high-density centers of diamond nucleation on various substrates. High-quality doped diamond films to be used as electrochemistry electrodes were deposited from the gas phase in a microwave discharge on certain substrates treated using ultrafine-dispersed nanodiamond. A uniform distribution of nucleation centers with concentrations greater than 10¹⁰ cm^-2 on silicon substrates was obtained. Electrochemical current-potential curves were measured for continuous films. Diamond meshes of different transparency were grown using selective nucleation. Successful production of high-quality doped diamond meshes gives grounds to consider them the most promising electrodes for use in electrochemistry.     

Chain decay of low-angle tilt boundaries in nanocrystalline materials

In terms of two-dimensional dislocation-disclination dynamics, a theoretical model is developed to describe the decay of a low-angle tilt boundary in a deformed nanocrystalline material under the action of an externally applied elastic stress and of the elastic field of a neighboring decayed boundary. The critical external stresses are calculated at which the boundary decays and the dislocations making up this boundary either are trapped by the boundary that decayed earlier or break away from both boundaries. The decay of a low-angle tilt boundary is shown to result in a substantial decrease in the critical decay stresses for the neighboring boundaries, which can cause an avalanche-like chain decay of low-angle boundaries yielding high-density ensembles of mobile dislocations capable of carrying substantial plastic deformations and of forming shear bands in deformed nanocrystalline materials.     

Investigation of the X-ray radiation produced by a diffusive discharge in the rod-plane geometry under atmospheric pressure

Spatial parameters of the X-ray radiation produced by a high-voltage nanosecond discharge evolving in air under atmospheric pressure in the rod (cathode)-plane electrode system with a 10-cm electrode spacing are studied experimentally. A ∼170-ns voltage pulse with an amplitude of ∼200 kV and 10-ns rise time is applied to the cathode. The photoelectronic method is used to study, under the same conditions, the integrated (over the gap) characteristics of the radiation, in particular, the duration of its generation. It is found that, when the size of the X-ray source is not smaller than that of the discharge region of diffusive luminescence, radiation from the cathode region of the gap is primarily observed (i.e., from the region where the electric field distribution is sharply inhomogeneous). The X-ray generation is usually observed after the bridging of the discharge gap, the X-ray pulse having a rise time of ∼3 ns, a duration of ∼10 ns, and an effective radiation energy of ∼6 keV.     

Numerical simulation of the translational nonequilibrium zone behind a shock-wave front

The translational nonequilibrium zone in a shock wave is considered for a gas consisting of light particles and a small addition of heavy particles. The gas is taken to be two-dimensional, and long-range forces are assumed to be absent. In the framework of this approximation, a program for molecular dynamics simulation of the gas is developed. It is applied to calculate a particle distribution function in the shock wave, to analyze the time evolution of the distribution function, and to study its dependence on the gas composition.     

Effect of γ radiation from <Superscript>60</Superscript>Co on the formation of metal contacts to GaAs (Al<Subscript>x</Subscript>Ga<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>As) structures

The properties of nonrectifying AuGe/GaAs (Al_0.4Ga_0.6As) contacts exposed to heat treatment, ⁶⁰Co γ radiation, and γ radiation combined with the application of an electrical bias are studied. A correlation between the type of interfacial interaction in the contacts and their resistance is found. Results obtained are explained in terms of a diffusion model with a movable boundary of the metal layer.     

The total acoustic impedance of a prolate spheroid performing transverse oscillatory movements

Using the theory of spheroidal wave functions, the total acoustic impedance is determined for a prolate spheroid performing transverse translational and rotational oscillatory movements. Expressions for the radiation resistance, the added mass, and the added moment of inertia are derived. It is shown that, in the lowfrequency approximation, this mass and moment of inertia reach limiting values identical to hydrodynamic ones. The components of the total acoustic impedance are calculated for spheroids of different relative thicknesses at an arbitrary frequency.