The kinetics of methane ignition in fuel-rich HCCI engines: DME replacement by ozone

Fuel-rich combustion of methane in a homogeneous-charge compression-ignition (HCCI) engine can be used as a polygeneration process producing work, heat, and useful chemicals like syngas. Due to the inertness of methane, additives such as dimethyl ether (DME) are needed to achieve ignition at moderate inlet temperatures and to control combustion phasing. Because significant concentrations of DME are then needed, a considerable part of the fuel energy comes from DME. An alternative ignition promotor known from fuel-lean HCCI is ozone (O₃). Here, a combined experimental and modelling study on the ignition of fuel-rich partial oxidation of methane/air mixtures at Φ = 1.9 with ozone and DME as additives in an HCCI engine is conducted. Experimental results show that ozone is a suitable additive for fuel-rich HCCI, with only 75 ppm ozone reducing the fuel-fraction of DME needed from 11.0% to 5.3%. Since ozone does not survive until the end of the compression stroke, the reaction paths are analyzed in a single-zone model. The simulation shows that different ignition precursors or buffer molecules are formed, depending on the additives. If only DME is added, hydrogen peroxide (H₂O₂) and formaldehyde (CH₂O) are the most important intermediates, leading to OH formation and ignition around top dead center (TDC). With ozone addition, methyl hydroperoxide (CH₃OOH) becomes very important earlier in the compression stroke under these fuel-rich conditions. It is then later converted to CH₂O and H₂O₂. Thus, ozone is a very effective additive not only for fuel-lean, but also for fuel-rich combustion. However, the mechanism differs between both regimes. Because less of the expensive additives are needed, ozone could help improving the economics of a polygeneration process with fuel-rich operated HCCI engines.     

Quinol-containing ligands enable high superoxide dismutase activity by modulating coordination number,charge, oxidation states and stability of manganese complexes throughout redox cycling

Reactivity assays previously suggested that two quinol-containing MRI contrast agent sensors for H₂O₂, [Mn(H2qp1)(MeCN)]²⁺ and [Mn(H4qp2)Br₂], could also catalytically degrade superoxide. Subsequently, [Zn(H2qp1)(OTf)]⁺ was found to use the redox activity of the H2qp1 ligand to catalyze the conversion of O₂˙⁻ to O₂ and H₂O₂, raising the possibility that the organic ligand, rather than the metal, could serve as the redox partner for O₂˙⁻ in the manganese chemistry. Here, we use stopped-flow kinetics and cryospray-ionization mass spectrometry (CSI-MS) analysis of the direct reactions between the manganese-containing contrast agents and O₂˙⁻ to confirm the activity and elucidate the catalytic mechanism. The obtained data are consistent with the operation of multiple parallel catalytic cycles, with both the quinol groups and manganese cycling through different oxidation states during the reactions with superoxide. The choice of ligand impacts the overall charges of the intermediates and allows us to visualize complementary sets of intermediates within the catalytic cycles using CSI-MS. With the diquinolic H4qp2, we detect Mn(iii)-superoxo intermediates with both reduced and oxidized forms of the ligand, a Mn(iii)-hydroperoxo compound, and what is formally a Mn(iv)-oxo species with the monoquinolate/mono-para-quinone form of H4qp2. With the monoquinolic H2qp1, we observe a Mn(ii)-superoxo ↔ Mn(iii)-peroxo intermediate with the oxidized para-quinone form of the ligand. The observation of these species suggests inner-sphere mechanisms for O₂˙⁻ oxidation and reduction that include both the ligand and manganese as redox partners. The higher positive charges of the complexes with the reduced and oxidized forms of H2qp1 compared to those with related forms of H4qp2 result in higher catalytic activity (k_cat ∼ 10⁸ M⁻¹ s⁻¹ at pH 7.4) that rivals those of the most active superoxide dismutase (SOD) mimics. The manganese complex with H2qp1 is markedly more stable in water than other highly active non-porphyrin-based and even some Mn(ii) porphyrin-based SOD mimics.

Manganese complexes with polydentate quinol-containing ligands are found to catalyze the degradation of superoxide through inner-sphere mechanisms. The redox activity of the ligand stabilizes higher-valent manganese species.     

Energy distribution curves of ultrafast laser-induced field emission and their implications for electron dynamics

Energy distribution curves of laser-induced electron pulses from a tungsten tip have been measured as a function of tip voltage and laser power. Electron emission via tunneling through and/or excitation over the surface barrier from photoexcited nonequilibrium electron distributions are clearly observed. The spectral shapes largely vary with the emission processes and are strongly affected by electron dynamics. Simulations successfully reproduce the spectra, thus allowing direct insight into the involved electron dynamics and revealing the temporal tunability of electron emission via the two experimental parameters. These results should be useful to optimize the pulse characteristics for many applications based on ultrafast laser-induced electron emission.     

The stability and reactivity of activated acryloylcarbamates as reagents for the synthesis of N‐1 substituted thymine and uracil – an NMR and DFT study

The mechanism of the decomposition of acryloylcarbamates 7a–b yielding highly reactive isocyanates 3a–b was proposed based on NMR measurements and quantum chemical calculations. A good agreement between the experimental kinetic data and DFT calculations allowed us to demonstrate that the stability of 7a–d depends on the presence of methyl in the acryloyl moiety and the position of the nitro group in the nitrophenolic part of the molecule. Furthermore, the reactivity of 7a–d with weakly nucleophilic and sterically hindered 2,4,6‐tri‐tert‐butylaniline was explored by ¹H NMR demonstrating the usefulness of reagents 7a–d offering access to a variety of 1‐N‐substituted uracils and thymines with potentially interesting biological properties. Copyright © 2010 John Wiley & Sons, Ltd.     

Constraints on dark matter annihilation from M87

As the largest mass concentrations in the local Universe, nearby clusters of galaxies and their central galaxies are prime targets in searching for indirect signatures of dark matter annihilation (DMA). We seek to constrain the dark matter annihilation emission component from multi-frequency observations of the central galaxy of the Virgo cluster. The annihilation emission component is modeled by the prompt and inverse-Compton gamma rays from the hadronization of annihilation products from generic weakly interacting dark matter particles. This component is fitted to the excess of the observed data above the spectral energy distribution (SED) of the jet in M87, described with a best-fit synchrotron-self-Compton (SSC) spectrum. While this result is not sufficiently significant to claim a detection, we emphasize that a dark matter “double hump signature” can be used to unambiguously discriminate the dark matter emission component from the variable jet-related emission of M87 in future, more extended observation campaigns.     

Simulation of oscillatory flow in an aortic bifurcation using FVM and FEM: A comparative study of implementation strategies

Cardiovascular diseases are one of the major causes of long‐term morbidity and mortality in human beings. The nearly epidemic increase in prevalence of such diseases poses a serious threat to public health and calls for efficient methods of diagnosis and treatment. Non‐invasive diagnostic procedures such as MRI are often used in this context; however, these are limited in terms of spatial and temporal resolution and do not provide information on time‐dependent pressures and wall shear stresses—key quantities considered to be partially responsible for the formation and development of related pathologies. The present study is concerned with the numerical simulation of oscillatory flow through the abdominal aortic bifurcation. Computational fluid dynamics simulation of oscillatory flow in a branched geometry at high Reynolds numbers poses considerable challenges. The present study reports a detailed comparison of simulations performed with a finite volume and a finite element method, two approaches with significant differences in their discretization strategy, treatment of boundary conditions and other numerical aspects. Both solvers were parallelized, using loop parallelization of the BiCGStab linear solver for the finite volume and domain decomposition based on the Schur complement method for the finite element technique. The experience gained with these two approaches for the solution of flow in a bifurcation forms the focus of this study. Although similar results were obtained for both methods, the computation time required for convergence was found to be significantly smaller for the finite element approach. Copyright © 2010 John Wiley & Sons, Ltd.