Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

Solvent water tapes in two hydrates of μ‐oxo‐bis­[bis­(2,2′‐bipyridine‐κ2N,N′)(sulfato‐κO)iron(III)]

The title compound, [Fe₂O(SO₄)₂(C₁₀H₈N₂)₄], crystallizes as two different hydrates, viz. 11H₂O, (I), and 15H₂O, (II). The complex is binuclear, in which the two Fe^III atoms are coordinated in an octa­hedral geometry to four N atoms from the two bipyridine ligands, to one O atom from the sulfate ion and to an oxide ion on a twofold axis, which acts as a bridge between the symmetry‐related units. The Fe⋯Fe separation is 3.556 (4) Å and the Fe—O—Fe angle is 161.6 (2)° in (I); the corresponding values are 3.544 (1) Å and 165.8 (2)° in (II). In (II), one of the O atoms of the sulfate ion is disordered over two positions. In both compounds, the solvent water mol­ecules form slightly different one‐dimensional hydrogen‐bonded networks which pass along the c axis of the unit cell. In (I), three solvent water mol­ecules and, in (II), one solvent water mol­ecule, are situated on the twofold axis. In both (I) and (II), the central O atom of the metal complex lies on a twofold axis.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.     

Electrochemical and chemical polymerization of acrylamide

The electrochemical and chemical polymerization of acrylamide (AA) has been studied. The electrolysis of the monomer in N,N-dimethylformamide (DMF) containing (C₄H₉)₄NClO₄ as the supporting electrolyte leads to polymer formation in both anode and cathode compartments. The cathodic polymer dissolves in the reaction mixture and the anodic polymer precipitates during the course of polymerization. A plausible mechanism for the anodic and cathodic initiation reaction has been given. The chemical polymerization of acrylamide that has been initiated by HClO₄ is analogous to its anodic polymerization. The polymer yield increases with an increase in concentration of the monomer and HClO₄. Raising the reaction temperature also enhances the polymerization rate. The overall apparent activation energy of the polymerization was determined to be ca. 19 kcal/mole. The copolymerization of acrylamide was carried out with methyl methacrylate (MMA) in a solution of HClO₄ in DMF. The reactivity ratios are r₁ (AA) = 0.25 and r₂ = 2.50. The polymerization with HClO₄ appears to be by a free radical mechanism. When the polymerization of acrylamide is carried out with HClO₄ in H₂O, a crosslinked water-insoluble gel formation takes place.     

A molecular mechanics approach for analyzing tensile nonlinear deformation behavior of single-walled carbon nanotubes

In this paper, by capturing the atomic information and reflecting the behaviour governed by the nonlinear potential function, an analytical molecular mechanics approach is proposed. A constitutive relation for single-walled carbon nanotubes (SWCNT’s) is established to describe the nonlinear stress-strain curve of SWCNT’s and to predict both the elastic properties and breaking strain of SWCNT’s during tensile deformation. An analysis based on the virtual internal bond (VIB) model proposed by P. Zhang et al. is also presented for comparison. The results indicate that the proposed molecular mechanics approach is indeed an acceptable analytical method for analyzing the mechanical behavior of SWCNT’s. The project supported by the National Natural Science Foundation of China (10121202, 90305015 and 10328203), the Key Grant Project of Chinese Ministry of Education (0306) and the Research Grants Council of the Hong Kong Special Administrative Region, China (HKU 7195/04E).     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

Synthesis and characterization of supramolecular optically active bisamides derived from amino acids

The synthesis and phase transitional behaviour of three pairs of enantiomeric supramolecular hexacatenar liquid crystals (LCs) derived from natural α-amino acids such as l/d-alanine, l/d-leucine and l/d-valine are described. Their preparation with high enantiomeric purity was accomplished by condensing optically active (amino acid residue containing) trialkoxy amines with a 3,4,5-trialkoxy cinnamic acid core using a peptide coupling reagent namely, 2-(1H-benzotriazol-1-yl)-1,1,3,3-tetramethyl-uronium hexafluorophosphate (HBTU). The mesomorphic behaviour of these self-complementing mesogens was ascertained by polarising optical microscopy, differential scanning calorimetry and X-ray diffraction. The compounds exhibit columnar (Col) phase over a wide thermal range. Particularly, a pair of enantiomers derived from l/d-leucine residues notably stabilize hexagonal Col (Col_h) phase over a wide temperature range of ?5 °C to 180 °C. Circular dichroism (CD) and FTIR studies suggest the chiral (helical) organization of mesogens within the columns through intermolecular hydrogen bonding; thus, these enantiomers represent one of the rarely reported examples of LCs exhibiting supramolecular Col_h phase at room temperature. The gelation studies reveal the ability of these bisamides to form stable supramolecular gels in ethanol caused through H-bonding interactions.     

The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Cellulose whiskers were prepared from wood- and cotton-based microcrystalline cellulose and dried by two methods: freeze-drying or air-drying. The effect of drying method on the properties and structure of the whiskers were studied. Furthermore, the influence of the source of cellulose on the nanoscale structure was investigated. Drying method was observed to slightly influence the thermal stability of cellulose whiskers, whereas the char residue varied significantly depending on the drying process performed. Small- and wide-angle X-ray scattering and solid state nuclear magnetic resonance spectroscopy were used to examine the crystallinity and nanoscale structure of the dried whiskers. It was observed that the crystal structure and crystallinity of cellulose whiskers remained during all treatments, whereas their nanoscale structure was significantly influenced by drying method, neutralization, and source of cellulose. Relationships between thermal behavior and nanoscale structure were reported and discussed.     

DSC study of stabilizing effect of antioxidant mixtures in styrene-butadiene rubber

The type of cooperation between antioxidants in the binary mixtures of four substituted diphenylamines and phenotiazine in the stabilization of styrene-butadiene rubber has been tested. Thermooxidation of the samples has been studied by differential scanning calorimetry under non-isothermal conditions. The protection factors of the individual stabilizers and their mixtures were determined. The synergy factors were applied to asses the type of cooperation of antioxidants in the mixtures. From their values it can be concluded that the type of cooperation depends on temperature. The highest synergistic effect has been observed for the mixture of phenotiazine and [4-(1-methyl-1-phenyl-ethyl)-phenyl]-phenylamine.