Laser studies of vibrational energy transfer and relaxation of CO trapped in solid neon and argon

The infrared emission of CO trapped in solid Ne and Ar is observed at low temperature. The first vibrational level of ¹²C¹⁶O is excited by a Q-switched frequency doubled CO₂ laser. The emission spectrum consists of several lines arising from upper vibrational levels of ¹²C¹⁶O and also of ¹³C¹⁶O and ¹²C¹⁸O which are present in natural abundance. An interpretation is proposed which is based on the assumption that long range dipole—dipole interaction is the main physical process involved in these experiments. Resonance energy transfer produces an energy migration among ¹²C¹⁶O molecules without any change in vibrational populations. Phonon assisted energy transfer takes place between vibrational levels of the various isotopic species present in the solution. In order to satisfy the resonance condition a phonon is emitted or absorbed whose energy compensates for the energy mismatch between the transitions in each interacting molecule due to isotopic effect and or vibrational anharmonicity. The range of this process is greatly extended by energy migration. At the low phonon bath temperature phonon emission is much more probable than phonon absorption. So a strong excitation of upper vibrational levels with in some cases population inversions is observed.Molecular impurities act as efficient quenching centers even at very low concentration. When highly purified samples are used, the fluorescence decay time is found to be 20.6 ms in Ne and 14.5 ms in Ar and does not significantly depend upon concentration and temperature. It is concluded that radiationless relaxation is unimportant.     

A new production method for carrier-free201Tl using IEN'S cyclotron in Rio De Janeiro

A new and simplified method was developed for the separation of thallium 201 which will allow the shipment of a “one shot generator” to distant places and easy elution at the destination. Thallium is produced as usually, through the reaction $${}^{nat}Tl/p,xn/^{201} pb\xrightarrow{{\beta ^ + }}{}^{201}Tl$$ with 24-MeV protons from IEN'S CV-28 cyclotron. The separation is based on the properties of a chelating carboxylic acid cation exchange resin column which at pH 4.5 retains lead while thallim is easily eluted. This column can also be used as a regular generator to produced greater quantities of²⁰¹Tl but at the expense of more elutions.     

3β‐(Stearyloxy)olean‐12‐ene from Austroplenckia populnea: Structure Elucidation by 2D‐NMR and Quantitative 13C‐NMR Spectroscopy

3β‐(Stearyloxy)olean‐12‐ene was isolated from a hexane extract of Austroplenckia populnea Reiss (Celastraceae) leaves. The structure was solved by means of quantitative ¹³C‐NMR, HMBC, HMQC, COSY, NOESY, and NOE difference spectra. The mass spectrum showed an [M+1]⁺ ion peak at m/z 693, and the molecular formula C₄₈H₈₄O₂ was confirmed by combustion analysis.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

MSXα method and transition-state procedure

Theoretical aspects of the MS X_α method are analyzed. It is shown that real field self-consistency is not achieved in an MS X_α calculation and some consequences of this fact are discussed. The approximations involved in the use of the transition-state procedure to evaluate ionization and excitation energies from a MS X_α calculation are presented in some detail and commented.     

Theoretical study of p‐methacryloyl‐aminophenylarsonic acid

Conformations of p‐methacryloylaminophenylarsonic acid (p‐MAPHA) are determined through molecular mechanics and DFT/B3LYP calculations. Solvation effects are studied within the self‐consistent isodensity continuum model (SCI‐PCM). The stationary points were found to correspond to minima as verified by the analysis of vibrational frequencies in the molecule. The molecular optical absorption was obtained by using different solvent environments. The present results are in good agreement with the available experimental data. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Biotreatment of tannin-rich beer-factory wastewater with white-rot basidiomycete Coriolopsis gallica monitored by pyrolysis/gas chromatography/mass spectrometry

Some fractions of beer-factory wastewaters represent an important environmental concern owing to their high content of polyphenols and dark-brown color. The capacity of Coriolopsis gallica to preferentially degrade lignin has been successfully applied in our laboratory to the biotreatment and decolorization of paper-industry effluents. In this work, the ability of this white-rot fungus to degrade high-tannin-containing wastewaters is evaluated. Under all the conditions studied, effluent decolorization and chemical oxygen demand reduction achieved by C. gallica at day 12 of incubation were close to 50 and 65%, respectively. No adhesion of dark color to the fungal mycelium was observed suggesting that decolorization could be ascribed to C. gallica degradation systems. Mycelium dry-weight values showed that C. gallica is tolerant to relatively high tannin content present in the effluent samples. In the sample containing the highest effluent concentration (60% v/v), dry-weight values suggested an inhibition of fungal growth at day 6 of incubation and a further adaptation of the fungus to the stressing tannin effect at day 12 of fungal treatment. Pyrolysis/gas chromatography/mass spectrometry results showed a decrease of polyphenols pyrolysis products, mainly phenol and guaiacol, with the incubation time. All these results indicate the potential use of C. gallica in bioremediation of tannin-containing industrial wastewaters and in other applications where a reduction in polyphenols content is required.     

Effect of cerium, holmium and samarium ions on the thermal and structural properties of the HZSM-12 zeolite

The study of the incorporation of rare earth elements as additives in Y zeolites is a very interesting field of research, mainly by its potential application as additives in catalytic cracking process. In this work was studied the thermal and structural properties of cerium, holmium and samarium supported on HZSM-12 zeolite. The obtained materials were characterized by X-ray diffraction (XRD), infrared spectroscopy (FTIR), nitrogen adsorption, thermogravimetry (TG/DTG), differential scanning calorimetry (DSC) and differential thermal analysis (DTA). TG/DSC/DTA analyses showed that the dehydration temperatures of RE/HZSM-12 zeolites (RE=Ce, Ho, Sm) increase in relation to pure HZSM-12. The acid properties were investigated by pyridine thermo desorption via TG. The results showed two events of mass loss attributed to elimination of pyridine adsorbed on the weak+medium acid sites and on the strong acid sites.     

Coupling Cloud Point Extraction to Instrumental Detection Systems for Metal Analysis

The purpose of this article is to review and evaluate cloud point extraction of metals and its coupling to different contemporary instrumental methods of analysis. This review covers a selection of the literature published on this topic over the period mainly between 1997 and September 2005 (consisting of 50 publications). The current state of the art for CPE concerning metals and metal chelates is presented with special emphasis on the hyphenation of this interesting extraction/preconcentration approach mediated by surfactants to spectrophotometry, atomic spectroscopy and separation techniques. We present contemporary CPE developments concerning metal speciation and determination and their application to different environmental, clinical, geological and food samples. Strategies for method development as well as future perspectives are also covered.     

Inoculum studies in production of penicillin g acylase by Bacillus megaterium ATCC 14945

This article reports studies concerning the production of penicillin G acylase (PGA) by Bacillus megaterium. This enzyme has industrial use in the hydrolysis of penicillin G to obtain 6-aminopenicillanic acid, an essential intermediate for the production of semisynthetic β-lactam antibiotics. Although most microorganisms produce the enzyme intracellularly, B. megaterium provides extracellular PGA. The enzyme production by microorganisms involves several steps, resulting in a many operational variables to be studied. The study of the inoculum is an important step to be accomplished, before addressing other issues such as culture optimization and downstream processing. In this study, using a standard inoculum as reference, several runs were performed aiming at the definition of operational conditions in the PGA production. Cell concentration and PGA activity in the production medium were measured after 24, 48, and 72 h of the beginning of the production phase. This study encompasses the duration of the inoculum germination phase and the concentration of cells used to startup the germination. Based on these results, PGA productivity during the production phase was maximized. The selected values for these variables were 1.5 × 10⁷ spores/mL of germination medium, germination during 24 h, and 72 h for the production phase.