回填材料膨润土对放射性气体滞留能力模拟研究

利用各种分析手段对膨润土的物理特性进行了表征 .X射线衍射分析表明钠基膨润土呈典型的六方晶胞 ,晶胞参数是 :a轴 4 .913,c轴 5 .4 0 5 ;差热分析曲线在低温区和高温区有明显的吸热峰出现 ;元素分析钠、钾离子的含量大于钙、镁离子的含量 ,在性能上表现为钠质膨润土具有较强的离子交换能力 ;显微分析表明其表面呈皱隙状 ,测定比表面积高达 2 4 .5 2m2 /g;吸水率测定表明膨胀率大 ,说明它具有密封功能 ,可有效阻滞地下水的渗入 .利用SF6示踪技术 ,通过采集不同时间段取样池样品 ,分析样品中示踪气体浓度 ,绘制取样池示踪气体浓度随时间的变化关系曲线 ,根据费克扩散定律计算扩散系数 .实验结果表明 ,随着压实膨润土密度的增大 ,示踪气体扩散系数迅速减小 ,当密度大于 1.8g/cm3 时 ,扩散系数降至 10 -9m2 /s.研究结果表明 ,膨润土性能优化是通过在膨润土中添加适量的活性炭 ,可明显改善其对气体的阻滞能力 ;增加其对放射性气体滞留能力 ;添加少量的石英砂增加其机械性能、导热性和减少蠕变性 ,将引起对气体阻滞能力的下降 .综合考虑 ,在膨润土中各添加 5 %活性炭和石英砂 ,既对气体具有较好的滞留能力 ,又具有较好的工程特性 .     

Development of a Millimeter Wave Compact Equipment for NDT of Materials

We developed a compact equipment working at 94 GHz to replace the commonly used network analyzer for nondestructive testing of materials. The compact equipment was designed to measure the variations in the amplitude and phase of the reflected signal from the material relative to a reference signal. A good accuracy of the amplitude and phase measurement of the equipment was obtained in the confirmative experiments. The distribution of a drop of water in a wood plate is clearly visible in the millimeter wave images obtained by the amplitude and phase measurement.     

The fabrication and characterization of poly(lactic acid) scaffolds for tissue engineering by improved solid–liquid phase separation

In this article a new technique was developed to fabricate scaffolds with a unique microstructure by solid–liquid separation in combination with particulate-leaching. Firstly, the effects of polymer concentration, quenching temperature on the porous morphology and the mechanical property of obtained scaffolds during solid–liquid separation have been investigated. Then, salt granules as porogen were introduced into the solid–liquid phase separation to produce the unique pore structure of the scaffold. The pore diameter of the scaffold could be controlled with the particulate size and the wall of pores possessed special microstructure, which enhanced the pore interconnectivity. The cell culture results confirmed that a good interconnectivity of the scaffold prepared by the improved solid–liquid separation was useful for nutrition transportation and cell proliferation. Copyright © 2003 John Wiley & Sons, Ltd.     

Some sufficient conditions for oscillation of impulsive delay hyperbolic systems with Robin boundary conditions

This paper deals with the oscillation problems of delay hyperbolic systems with impulses. Some sufficient conditions for oscillations of impulsive delay hyperbolic systems with Robin boundary conditions are obtained and the criteria of oscillation of the systems are established.     

Photo-induced effect in the layered perovskite manganite La<Subscript>1.2</Subscript>Sr<Subscript>1.8</Subscript>Mn<Subscript>1.8</Subscript>Co<Subscript>0.2</Subscript>O<Subscript>7</Subscript>

It is helpful to study the photo-induced effect in the perovskite manganites not only for elucidating the mechanism of colossal magnetoresistance (CMR) effect but also for potential applications in technology. The laser-induced effect in the Co doping layered perovskite manganites La_1.2Sr_1.8Mn_1.8Co_0.2O₇, is studied in this paper and the obtained results are also compared with that gained in the Nd-doping manganites with cubic perovskite structure.     

The Characteristic of Threading Dislocation in Different Structures GaN Films Grown by MOCVD

Three mechanisms to reduce threading dislocations(TDs) in GaN films as the epitaxial films grow thicker are suggested by SEM and TEM     

Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.     

Experimental 511 W Composite Nd：YAG Ceramic Laser

We demonstrate a 511 W laser diode pumped composite Nd：YAG ceramic laser. The optical pumping system is consisted of five laser diode stacked arrays arranged in a pentagonal shape around the ceramic rod whose size is φ6.35×144mm. When the pumping power is 1600 W, the cw laser output up to 511 W at 1064nm can be obtained with a linear piano-piano cavity, and the optical-to-optical efficiency is 31.9%. To our knowledge, this is the highest value of laser output by using a newly invented composite Nd：YAG ceramic rod as the gain medium.     

A Crowning Moment for Wiener Indices

The Wiener (Sum of All Distances) Index for three out of the four classes of hexagonal models or regular planar hex-patterns used to model graphite and similar structures have been known for a few years. In this paper we find the Wiener Index for the Crown or Beehive hexagonal model.     

Optical characterization of CdTe/ZnSe fractional monolayer structures grown by atomic layer epitaxy

Luminescence properties of CdTe/ZnSe fractional monolayer grown by atomic layer epitaxy have been investigated. To investigate the origin of the highly efficient luminescence, various optical spectroscopic methods such as, photoluminescence (PL), temporal/spatial resolved PL, temperature dependence PL, and excitation power dependence PL have been used. It is found that structural inhomogeneities affect dominant influence on the line width and line shape of luminescence. The luminescence intensity greatly enhanced by the localization of exciton at the disorder induced localized states.