1.54μmEr3+,Yb3+共掺玻璃激光器的速率方程及数值分析

LD抽运共掺Er,Yb玻璃激光器中的跃迁过程较复杂,针对双掺离子之间的能量传递和Er3+的多种跃迁过程,给出了详细的准三能级系统的速率方程,在合理简化后进行了数值分析,分析了Er3+掺杂浓度和介质长度、抽运光斑、输出镜透过率、谐振腔长、抽运光的椭圆度等因素对激光阈值及斜率效率的影响. 关键词： 1.54μm激光 Er3+玻璃 速率方程 数值分析     

长波长大应变InGaAs/InGaAsP分布反馈激光器的材料生长与器件制备

采用低压金属有机化合物气相沉积法(LP-MOCVD)生长并制作了1.6—1.7μm大应变InGaAs/InGaAsP分布反馈激光器.采用应变缓冲层技术，得到质量良好的大应变InGaAs/InP体材料.器件采用了4个大应变的量子阱，加入了载流子阻挡层改善器件的温度特性.1.66μm和1.74μm未镀膜的3μm脊型波导器件阈值电流低(小于15mA)，输出功率高(100mA时大于14mW).从10—40℃，1.74μm激光器的特征温度T₀=57K，和1.55μm InGaAsP分布反馈激光器的特征温度相当. 关键词： MOCVD InGaAs/InGaAsP 应变量子阱 分布反馈激光器     

准二维无序系统的电子结构

对形如N_t×N_l型准二维无序系统，只考虑格点之间的最近邻跳跃积分，采用特殊的格点编号方案，在单电子近似下，系统的哈密顿量可表示为简明对称矩阵，借助豪斯荷尔德变换将其约化为对称三对角矩阵，再利用负本征值理论及传输矩阵等方法,对系统态密度、局域长度及电导等电子结构特性进行数值计算. 重点研究了准一维四平行链和五平行链无序系统， 将结果与一维单链、准一维双链及三链系统进行对比，发现随维度的增加，系统的能带有所展宽，能态密度分布发生很大的变化，其峰值数量呈偶数规律增加. 并且在能带中心处存在有局域长度大于系统大小的扩展态，处于这些态下的系统具有较大电导. 从单链到多链，相当于扩大了系统的关联范围，使系统出现了类似非对角长程关联的行为. 关键词： 准二维无序系统 态密度 局域长度 电导     

偶氮苯衍生物三阶非线性的四波混频研究

用皮秒Ｎｄ：ＹＡＧ激光器的倍频光（５３２ｎｍ）对具有离域π－共轭电子云结构的偶氮苯类样品材料作简并四波混频补给，测得三阶非线性电极化率ｘ＾（３）和它们的时间响应分别为１０＾－９ｅｓｕ和２０ｐｓ，并对影响ｘ＾（３）的瞬时光栅作用和ｘ＾（３）的响应时间人了讨论。     

Large-scale magnetic structures of coronal mass ejections

Based on the studies on the source regions of a group of coronal mass ejections, we have identified two types of large-scale magnetic structures, and suggested that they are intrinsic components of solar magnetism, their destabilization, expansion, and eruption into the interplanetary space are the basic physical processes which lead to the coronal mass ejections. These two types of large-scale structures are giant magnetic loops connecting the two active belts on the opposite hemispheres of the Sun, and the giant filaments (filament channels) and their related magnetic structures. The latter often appear as two parallel rows of sunspots and plage fields, which align side by side in the full disk daily and synoptic magnetograms. The magnetic neutral lines of these large-scale structures are usually longer than 50 heliographic degrees. We name this type of structure “super A configuration”. Sometimes, they are shown as very long filaments and related large-scale magnetic fields. As these magnetic structures are of very large scale, they extend to a great altitude into the corona, they are not easily recognized in magnetic field observations which are usually aimed at solar flare studies. To identify these large-scale structures becomes a key to understanding and predicting coronal mass ejections.     

Equivalent boundary integral equations for plane elasticity

Indirect and direct boundary integral equations equivalent to the original boundary value problem of differential equation of plane elasticity are established rigorously. The unnecessity or deficiency of some customary boundary integral equations is indicated by examples and numerical comparison.     

Integral representations of harmonic functions in half spaces

In this paper, using a modified Poisson kernel in an upper half-space, we prove that a harmonic function u(z) in a upper half space with its positive part u⁺(x)=max{u(x),0} satisfying a slowly growing condition can be represented by its integral in the boundary of the upper half space, the integral representation is unique up to the addition of a harmonic polynomial, vanishing in the boundary of the upper half space and that its negative part u⁻(x)=max{−u(x),0} can be dominated by a similar slowly growing condition, this improves some classical result about harmonic functions in the upper half space.     

Preparing polymer brushes on polytetrafluoroethylene films by free radical polymerization

Films of polytetrafluoroethylene (PTFE) were exposed to sodium naphthalenide (Na/naphtha) etchant so as to defluorinate the surface for obtaining hydroxyl functionality. Surface-initiators were immobilized on the PTFE films by esterification of 4,4′-azobis(4-cyanopentanoic acid) (ACP) and the hydroxyl groups covalently linked to the surface. Grafting of polymer brushes on the PTFE films was carried out by the surface-initiated free radical polymerization. Homopolymers brushes of methyl methacrylate (MMA) were prepared by free radical polymerization from the azo-functionalized PTFE surface. The chemical composition and topography of the graft-functionalized PTFE surfaces were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance (ATR) FT-IR spectroscopy and atomic force microscopy (AFM). Water contact angles on PTFE films were reduced by surface grafting of MMA.     

PIXE analysis of the Mn-doped content in Ga1-xMnxN film grown by LP-MOVPE

Summary Department of Technical Physics, School of Physics, Peking Unive