An iminophosphine dendrimeric ligand and its evaluation in the Heck reaction

DAB-dendr-(NH₂)₃₂ has been modified to produce two novel dendrimeric P,N-ligands, DAB-dendr-[1,2-(NCHC₆H₄PPh₂)]₃₂ and DAB-dendr-[1,2-(NHCH₂C₆H₄PPh₂)]₃₂. These were both found to activate electron rich aryl bromides in the Heck reaction. The reactions seem to proceed better in a novel solvent system consisting of an equimolar mixture of a tertiary amine with acetic acid. A marked dependence of the conversion on the [equivalents of dendrimeric ligand]/[Pd] ratio has been observed with conversion decreasing as the ratio of dendrimer equivalents to Pd increases. This phenomenon is attributed to interactions of the arms bearing the metal with neighboring ones within the dendrimer.     

Metal oxidation states in biological water splitting

A central question in biological water splitting concerns the oxidation states of the manganese ions that comprise the oxygen-evolving complex of photosystem II. Understanding the nature and order of oxidation events that occur during the catalytic cycle of five S_i states (i = 0–4) is of fundamental importance both for the natural system and for artificial water oxidation catalysts. Despite the widespread adoption of the so-called “high-valent scheme”—where, for example, the Mn oxidation states in the S₂ state are assigned as III, IV, IV, IV—the competing “low-valent scheme” that differs by a total of two metal unpaired electrons (i.e. III, III, III, IV in the S₂ state) is favored by several recent studies for the biological catalyst. The question of the correct oxidation state assignment is addressed here by a detailed computational comparison of the two schemes using a common structural platform and theoretical approach. Models based on crystallographic constraints were constructed for all conceivable oxidation state assignments in the four (semi)stable S states of the oxygen evolving complex, sampling various protonation levels and patterns to ensure comprehensive coverage. The models are evaluated with respect to their geometric, energetic, electronic, and spectroscopic properties against available experimental EXAFS, XFEL-XRD, EPR, ENDOR and Mn K pre-edge XANES data. New 2.5 K ⁵⁵Mn ENDOR data of the S₂ state are also reported. Our results conclusively show that the entire S state phenomenology can only be accommodated within the high-valent scheme by adopting a single motif and protonation pattern that progresses smoothly from S₀ (III, III, III, IV) to S₃ (IV, IV, IV, IV), satisfying all experimental constraints and reproducing all observables. By contrast, it was impossible to construct a consistent cycle based on the low-valent scheme for all S states. Instead, the low-valent models developed here may provide new insight into the over-reduced S states and the states involved in the assembly of the catalytically active water oxidizing cluster.     

A facile method to synthesize high‐molecular‐weight biobased polyesters from 2,5‐furandicarboxylic acid and long‐chain diols

In this study, biobased furan dicarboxylate polyesters have been prepared using 2,5‐furandicarboxylic acid (FDCA) and diols with high number of methylene groups (long‐chain diols), namely, 8, 9, 10, and 12. Because of the high boiling points of these diols, a modified procedure of the well‐known melt polycondensation was applied in this work. According to this, the dimethyl ester of FDCA (DMFD) reacted in the first transesterification stage with the corresponding diols forming bis‐hydroxy‐alkylene furan dicarboxylates (BHFD). In the second stage, the BHFD reacted with DMFD again at temperatures of 150–170 °C (for 4–5 h), and in the final stage, the temperature was raised to 210–230 °C (vacuum was applied for 2–3 h). The molecular weight of the polyesters and the content of oligomers, as was verified by gel permeation chromatography analysis, depend on the polycondensation time and temperature. The chemical structure of the polyesters was verified from ¹H NMR spectroscopy. All the polymers were found to be semicrystalline, with melting temperatures from 69 to 140 °C depending on the diol used. In addition, the mechanical properties also varied with the type of diol. The higher values were observed for poly(octylene 2,5‐furanoate), whereas the lowest values were observed for poly(dodecylene 2,5‐furanoate) with the higher number of methylene groups in its repeating unit. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2617–2632     

New Calix[4]arene‐Cored Peripherally Functionalized Dendrimers: Synthesis and Conformational Characteristics

New calixarene‐based dendrimers, containing calix[4]arene as the core and different generations of Fréchet‐type poly(benzyl ether) dendrons as building blocks, which possess either Br‐atoms or COO^tBu groups at their surface were synthesized and presented herein for the first time. The new calix[4]arene‐cored dendritic macromolecules were fully characterized and found to prefer strictly the cone conformation.     

A portable sensor for the rapid detection of naphthalene acetic acid in fruits and vegetables using stabilized in air lipid films with incorporated auxin-binding protein 1 receptor

The present technique describes the development of a simple sensitive spot optical test and the construction of a portable biosensor for the rapid one-shot detection of naphthalene acetic acid (NAA) using stabilized lipid films supported on a methacrylate polymer on a glass fiber filter with incorporated auxin-binding protein 1 receptor. The lipid films without the receptor provided fluorescence under a UV lamp. The use of the receptor in these films quenched this fluorescence and the colour became similar to that of the filters without the lipid films. A drop of aqueous solution of naphthalene acetic acid provided a “switching on” of the fluorescence which allows the rapid detection of this stimulant at the levels of 10⁻⁹ M concentrations. It was also possible to have quantitative data based on a calibration graph. The effect of potent interferences included a wide range of compounds. The results showed no interferences from these compounds in concentration levels usually found in real samples. The method was applied for the determination of NAA in fruits and vegetables and the reproducibility of the method was checked in about 50 samples. A quantitative method for the detection of NAA in crops that can be complimentary to HPLC methods is provided in the present paper. These lipid films can be used as portable biosensors for the rapid one-shot detection of NAA in fruits and vegetables by non-skilled personnel in the field.     

A High Cell‐Bearing Capacity Multibore Hollow Fiber Device for Macroencapsulation of Islets of Langerhans

Macroencapsulation of islets of Langerhans is a promising strategy for transplantation of insulin‐producing cells in the absence of immunosuppression to treat type 1 diabetes. Hollow fiber membranes are of interest there because they offer a large surface‐to‐volume ratio and can potentially be retrieved or refilled. However, current available fibers have limitations in exchange of nutrients, oxygen, and delivery of insulin potentially impacting graft survival. Here, multibore hollow fibers for islets encapsulation are designed and tested. They consist of seven bores and are prepared using nondegradable polymers with high mechanical stability and low cell adhesion properties. Human islets encapsulated there have a glucose induced insulin response (GIIS) similar to nonencapsulated islets. During 7 d of cell culture in vitro, the GIIS increases with graded doses of islets demonstrating the suitability of the microenvironment for islet survival. Moreover, first implantation studies in mice demonstrate device material biocompatibility with minimal tissue responses. Besides, formation of new blood vessels close to the implanted device is observed, an important requirement for maintaining islet viability and fast exchange of glucose and insulin. The results indicate that the developed fibers have high islet bearing capacity and can potentially be applied for a clinically applicable bioartificial pancreas.     

Templated protein assembly on micro-contact-printed surface patterns. Use of the SNAP-tag protein functionality

Micro contact printing (microCP) has been established as a simple technique for high-resolution protein patterning for micro- and nanoarrays. However, as biochemical assays based on immobilized protein arrays progress from immunoassays to more delicate functional assays, the demand for methods of miniaturized, gentle, and oriented immobilization, which are applicable to many different target proteins, becomes larger. In this study, we present a novel microCP templated assembly approach, based on a recombinant SNAP-FLAG-HIS 10 (SFH) immobilization vehicle, which exploits the recently developed SNAP-tag protein. The SNAP-tag is derived from the human DNA repair protein hAGT, which covalently transfers the alkyl group of benzyl guanine (BG) substrates onto itself. We have designed a model SFH cassette carrying three tags (SNAP-tag, FLAG-tag, and HIS-tag), each of which can be used for fluorescence labeling or surface immobilization. When patterns of streptavidin modified with BG-biotin (streptavidin-BG) are stamped onto a surface, the SFH can subsequently assemble on the ligand pattern from solution, functioning as a general immobilization vehicle for high-resolution patterning of any protein expressed in the SFH cassette, in a gentle and oriented manner. Alternatively, the SFH can be site-selectively biotinylated using BG-biotin and, subsequently, assemble on stamped streptavidin. We exploit several ways to biotinylate the SFH protein via the SNAP-tag, promoting its templated assembly on micropatterns of streptavidin in four complementary formats. Quantitative analysis of the obtained patterns, revealed by immunostaining, indicates that all four approaches resulted in proper SFH immobilization and antibody recognition, demonstrating the versatility of the SFH cassette and the potential for high resolution patterning applications. Also, our data confirm that streptavidin can be stamped directly on surfaces, without loss of activity. While three strategies resulted in similar patterning efficiencies, one particular approach--namely templated assembly of SFH directly on streptavidin-BG patterns--resulted in an order of magnitude increase in patterning efficiency.     

Electrical impedance spectroscopy of epoxy systems: The case of 1,4-butanediol diglycidyl ether/cis-1,2-cyclohexanedicarboxylic anhydride and triethylamine as initiator

A series of epoxy cured samples, with different molar composition of 1,4-butanediol diglycidyl ether (EP), cis-1,2-cyclohexanedicarboxylic anhydride (CH) and triethylamine (TEA) as initiator, was studied by Electrical Impedance Spectroscopy (EIS) in the frequency range 10⁻²-10⁵ Hz. The resistivity of the system was evaluated by using the complex impedance analysis method. Resistivity values in the range between 10⁷ and 10¹³ Ω cm were obtained and related to the composition (molar fraction x_EP or x_CH) of the epoxy system. The gel formation characteristics of the samples were obtained as theoretically described by Flory.     

Construction of a simple optical sensor based on air stable lipid film with incorporated urease for the rapid detection of urea in milk

This work describes the construction of a simple optical sensor for the rapid, selective and sensitive detection of urea in milk using air stable lipid films with incorporated urease. The lipid film is stabilized on a glass filter by polymerization using UV (ultra-violet) radiation prior its use. Methacrylic acid was the functional monomer, ethylene glycol dimethacrylate was the crosslinker and 2,2′-azobis-(2-methylpropionitrile) was the initiator. Urease is incorporated within this mixture prior to the polymerization. The presence of the enzyme in these films quenched this fluorescence and the colour became similar to that of the filters without the lipid films. A drop of aqueous solution of urea provided a “switching on” of the fluorescence which allows the rapid detection of this compound at the levels of 10⁻⁸ M concentrations. The investigation of the effect of potent interferences included a wide range of compounds usually found in foods and also of proteins and lipids. These lipid membranes were used for the rapid detection of urea in milk.