New way of presenting the universal calibration of gel permeation chromatography to include macromolecules with very high segment density

The universal calibration of gel permeation chromatography presents deviations when star‐shaped polymers are used, especially when they present high segment density. Polymers presenting high segment density also have higher values of Flory's parameter Φ than the corresponding flexible, linear polymers. This deviation disappears if we express the hydrodynamic volume of the polymers with the quantity [η]M/Φ (where [η] is the intrinsic viscosity and M is the molecular mass) instead of the commonly used quantity [η]M. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2388–2391, 2005     

Miscibility and enzymatic degradation studies of poly(ε-caprolactone)/poly(propylene succinate) blends

In the present study the miscibility behaviour and the biodegradability of poly(ε-caprolactone)/poly(propylene succinate) (PCL/PPSu) blends were investigated. Both of these aliphatic polyesters were laboratory synthesized. For the polymer characterization DSC, ¹H NMR, WAXD and molecular weight measurements were performed. Blends of the polymers with compositions 90/10, 80/20, 70/30 and 60/40 w/w were prepared by solution-casting. DSC analysis of the prepared blends indicated only a very limited miscibility in the melt phase since the polymer-polymer interaction parameter χ₁₂ was −0.11. In the case of crystallized specimens two distinct phases existed in all studied compositions as it was found by SEM micrographs and the particle size distribution of PPSu dispersed phase increased with increasing PPSu content. Enzymatic hydrolysis for several days of the prepared blends was performed using Rhizopus delemar lipase at pH 7.2 and 30 °C. SEM micrographs of thin film surfaces revealed that hydrolysis affected mainly the PPSu polymer as well as the amorphous phase of PCL. For all polymer blends an increase of the melting temperatures and the heat of fusions was recorded after the hydrolysis. The biodegradation rates as expressed in terms of weight loss were faster for the blends with higher PPSu content. Finally, a simple theoretical kinetic model was developed to describe the enzymatic hydrolysis of the blends and the Michaelis-Menten parameters were estimated.     

A minisensor for the rapid screening of atenolol in pharmaceutical preparations based on surface-stabilized bilayer lipid membranes with incorporated DNA

This work describes an electrochemical technique that is suitable for the rapid and sensitive screening of atenolol based on surface-stabilized bilayer lipid membranes (s-BLMs) composed from egg phosphatidylcholine (PC). The interactions of atenolol with s-BLMs produced electrochemical ion current increases that reproducible appeared within a few seconds after the exposure of the membranes to the drug. The current signal increase was related to the concentration of atenolol in bulk solution in the micromolar range. The present lipid film-based sensor provided fast response (i.e. on the order of a few seconds) to alterations of atenolol concentration (20 to 200 micro M) in electrolyte solution. ssDNA incorporated into s-BLMs can interact with atenolol, and decreased the detection limit of this drug by one order of magnitude. The oligomers used were single stranded deoxyribonucleic acids: thymidylic acid icosanucleotide terminated with a C-16 alkyl chain to assist incorporation into s-BLMs (5'-hexadecyl-deoxythymidylic acid icosanucleotide, dT(20)-C(16)). The electrochemical transduction of the interactions of atenolol with s-BLMs was applied in the determination of these compounds in pharmaceutical preparations by using the present minisensor.     

Thermally activated mechanisms of hydrogen abstraction by growth precursors during plasma deposition of silicon thin films

Hydrogen abstraction by growth precursors is the dominant process responsible for reducing the hydrogen content of amorphous silicon thin films grown from SiH(4) discharges at low temperatures. Besides direct (Eley-Rideal) abstraction, gas-phase radicals may first adsorb on the growth surface and abstract hydrogen in a subsequent process, giving rise to thermally activated precursor-mediated (PM) and Langmuir-Hinshelwood (LH) abstraction mechanisms. Using results of first-principles density functional theory (DFT) calculations on the interaction of SiH(3) radicals with the hydrogen-terminated Si(001)-(2x1) surface, we show that precursor-mediated abstraction mechanisms can be described by a chemisorbed SiH(3) radical hopping between overcoordinated surface Si atoms while being weakly bonded to the surface before encountering a favorable site for hydrogen abstraction. The calculated energy barrier of 0.39 eV for the PM abstraction reaction is commensurate with the calculated barrier of 0.43-0.47 eV for diffusion of SiH(3) on the hydrogen-terminated Si(001)-(2x1) surface, which allows the radical to sample the entire surface for hydrogen atoms to abstract. In addition, using the same type of DFT analysis we have found that LH reaction pathways involve bond breaking between the silicon atoms of the chemisorbed SiH(3) radical and the film prior to hydrogen abstraction. The LH reaction pathways exhibit energy barriers of 0.76 eV or higher, confining the abstraction only to nearest-neighbor hydrogens. Furthermore, we have found that LH processes compete with radical desorption from the hydrogen-terminated Si(001)-(2x1) surface and may be suppressed by the dissociation of chemisorbed SiH(3) radicals into lower surface hydrides. Analysis of molecular-dynamics simulations of the growth process of plasma deposited silicon films have revealed that qualitatively similar pathways for thermally activated hydrogen abstraction also occur commonly on the amorphous silicon growth surface.     

The Structure of Adsorbed CO(2) in Slitlike Micropores at Low and High Temperature and the Resulting Micropore Size Distribution Based on GCMC Simulations

The Monte Carlo method is used in its grand ensemble variant in combination with CO(2) experimental isotherm data at low (195.5 K) and high temperatures (at 298 and 308 K, i.e., slightly below and above the CO(2) critical temperature, respectively) to characterize microporous carbons and obtain the corresponding pore size distribution (PSD). Specifically, the CO(2) density inside a single, slit-shaped, graphitic pore of given width is found on the basis of grand canonical Monte Carlo (GCMC) simulations for a predefined temperature and different relative pressures. The simulation results provide useful insights concerning the densification process in the micropores and the structure of the CO(2) molecules packing in the individual pores as the temperature or pressure changes from 195.5 K to ambient or from very low to 70 bar, respectively. Effects of temperature, pore size, quadrupole interactions, and molecule elongation on the local density profile within the pore are examined and discussed. In an additional step, we determine the optimal PSD for which the best match is obtained between computed and measured CO(2) isotherms. Comparisons are made between the PSDs found for the same carbon sample at low and high temperatures and conclusions are drawn concerning the applicability of the method and the reliability of the resulting micropore size distributions. Copyright 2000 Academic Press.     

Miktoarm star copolymers of poly(ϵ‐caprolactone) from a novel heterofunctional initiator

A novel heterofunctional initiator, synthesized from pentaerythritol in a three step reaction sequence with two ring opening polymerization (ROP) and two atom transfer radical polymerization (ATRP) initiating sites, was used to prepare A₂B₂ miktoarm star copolymers of poly(ε‐caprolactone), PεCL, with polystyrene, PS, poly(methyl methacrylate), PMMA, poly(dimethylaminoethyl methacrylate), PDMAEMA, and poly(2‐hydroxyethyl methacrylate), PHEMA. A₂B miktoarm stars, A being PεCL or poly(δ‐valerolactone), PδVL and B PS were also prepared from ω,ω‐dihydroxy‐PS, synthesized from ω‐Br‐PS and serinol, by ROP of εCL or δVL. All polymers were characterized by size exclusion chromatography, ¹H NMR spectroscopy, and membrane osmometry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5164–5181, 2007     

A variant of Digital Signature Algorithm

In this paper we present a variant of the Digital Signature Algorithm based on a factorization problem and two discrete logarithm problems. We prove that our signature scheme is at least as secure as the original Digital Signature Algorithm and withstands all known attacks.      

Network formation studied by temperature scanning brillouin scattering and differential scanning calorimetry techniques. II.

The reaction of 1,4‐butanediol diglycidyl ether (EP) with cis‐1,2‐cyclohexanedicarboxylic anhydride (CH) and triethylamine (TEA) as an initiator was studied with temperature scanning Brillouin spectroscopy (TSBS) and differential scanning calorimetry (DSC). The evolution of the reaction process (liquid–gel–solid) was investigated as a function of the epoxy molar fraction (x_EP), for sample compositions varying from an epoxy excess to an anhydride excess. The dependence of the final conversion factors αr_DSC and αr_TSBS and the kinetic parameters E_DSC and E_TSBS on x_EP is presented. A comparison of the experimental gelation point (Pgel) behavior and the expected theoretical one, described by the Flory theory, is also reported. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1326–1336, 2001