Carbon Nanotubes Grown on Sepiolite as Catalyst Carrier

Multi-walled carbon nanotubes were synthesized by the catalytic decomposition of acetylene at 750℃ over sepiolite powder,which was treated with aqueous cobalt nitrate. It is expected that the composite with high specific area will have high capacity of hydrogen storage.     

Dissolution of ionisable groups and lignocellulosic components during low-temperature kraft pulping of pinus radiata

A wide range of kraft pulps from radiata pine produced by low-temperature kraft pulping in flow-through reactors was assessed for carboxyl and hexenuronic acid (HexA) contents using the conductometric titrations and UV spectrophotometer, respectively. The Kappa number of pulps varied from 20.8 to 84.7 when using a cooking liquor of 1 M effective alkali as Na₂O, 25% sulfidity, and cooking time of 100–250 min. The experimental results showed that the carboxyl groups (including HexA) and HexA groups dissolved and their residual values in the pulp samples correlate linearly with Kappa number and pulp yield. The dissolving rate of all carboxyl groups is much faster than the loss of HexA. The HexA/lignin ratio decreased non-linearly with Kappa number.     

Measurements of HO2 uptake coefficient on aqueous (NH4)2SO4 aerosol using aerosol flow tube with LIF system

The γ(HO₂) was elevated with increase of Cu(II) concentrations in aqueous (NH₄)₂SO₄ aerosol. The threshold of Cu(II) concentration was 10^-3 mol/L for the dramatic increase of γ(HO₂) to 0.1, suggesting sensitive γ(HO₂) value to concentration of transition metal ions in aerosol.     

磷化氢与环烯烃反应的原位^3^1P NMR研究

本文应用加压原位核磁共振波谱技术, 在反应温度50-70℃、反应压力1.0-2.0MPa, 氘代苯为溶剂, 偶氮二异丁腈为引发剂的条件下, 考察了磷化氢与环烯烃1, 5-环辛二烯、双环戊二烯、1, 3-环己二烯、1, 4-环己二烯及1, 5, 9-环十二三烯的反应。实验结果表明, 磷化氢与1, 5-环辛二烯反应主要生成双环膦杂环壬烷; 与其它环烯烃均不生成膦杂环化合物, 仅为一取代伯膦或二取代仲膦产物。磷化氢与环烯烃反应仍为串行机理。     

神经毒品解毒和戒瘾的新疗法──血液灌流疗法

贩毒吸毒是当今世界最严重的社会公害之一，对社会安定和人们的身心健康构成极大威胁。至今，解毒和戒瘾还一直沿用传统医疗手段。本文介绍了毒品的药理学和成瘾机制以及有关解毒戒瘾的治疗方法，着重探讨了血液灌流疗法在治疗毒品滥用上的应用前景。     

Large scale Biginelli reaction via water-based biphasic media: a green chemistry strategy

An important stage in process development is kilo scale preparation of the target compound. For this reason, a procedure involving water-based biphasic reaction media has been developed for conducting some exothermic reactions on a large scale. This protocol is illustrated by the energy-efficient and rapid preparation of dihydropyrimidinones by a solvent-free, green chemistry procedure applied to the Biginelli reaction using p-toluenesulfonic acid as catalyst.     

Three New Anthraquinones from Polygonum cillinerve

Three new anthraquinones, emodin-8-β-D-（2＂-O-coumarate）glucoside 1, emodin-8-β-D-（6＇-O-acetyl）glucoside 2 and physicon-8-β-D-（6＇-O-acetyl）glucoside 3, were isolated from the roots of Polygonum cillinerve and their structures were established by spectroscopic methods. The biological activity indicated that compound 1 had the scavenging activity on 1,1-diphenyl-2-picrylhydrazyl （DPPH） radicals （the IC50 = 8.5 μmol/L）, and compound 1-3 showed no activities against HL-60 and BCJC-823 cells by MTT method in vitro.     

PBA@POM Hybrids as Efficient Electrocatalysts for the Oxygen Evolution Reaction

To realize the effective conversion of renewable energy through water decomposition, efficient electrocatalysts for the oxygen evolution reaction (OER) are essential. In this article, PBA@POM was successfully prepared with a Prussian blue analogue (PBA) as the initial structure. A facile hydrothermal process is reported for obtaining PBA@POM by etching the cubic PBA with a strong Brønsted acid, H₃PMo₁₂O₄₀ (HPMo). The hollow cube structure not only exposes more active sites but also promotes electron transport, which results in excellent electrocatalytic activity for the OER. Compared with the PBA, which initially simply adhered to POM, the optimum PBA@POM hybrids display remarkably enhanced OER catalytic activity, with an almost constant overpotential of 440 mV at a current density of 10 mA cm^?2 and a small Tafel slope (23.45 mV dec^?1). The facilely prepared PBA@POM with good electrochemical activity and stability promises great potential for the OER.     

聚合物微晶尺寸和晶格畸变

聚合物微晶尺寸和晶格畸变是对聚合物材料性能有着重要影响的结构参数。本文介绍了应用Ｘ射线衍射方法测定聚合物微晶尺寸和结构畸变的几种方法：近似函数、次晶模型法、方差法、矩法。     

Dense Sphene-type Solid Electrolyte Through Rapid Sintering for Solid-state Lithium Metal Battery

The sphene-type solid electrolyte with high ionic conductivity has been designed for solid-state lithium metal battery. However, the practical applications of solid electrolytes are still suffered by the low relative density and long sintering time of tens of hours with large energy consumption. Here, we introduced the spark plasma sintering technology for fabricating the sphene-type Li_1.125Ta_0.875Zr_0.125SiO₅ solid electrolyte. The dense electrolyte pellet with high relative density of ca. 97.4% and ionic conductivity of ca. 1.44×10^-5 S/cm at 30℃ can be obtained by spark plasma sintering process within the extremely short time of only ca. 0.1 h. Also the solid electrolyte provides stable electrochemical window of ca. 6.0 V(vs. Li⁺/Li) and high electrochemical interface stability toward Li metal anode. With the enhanced interfacial contacts between electrodes and electrolyte pellet by the in-situ formed polymer electrolyte, the solid-state lithium metal battery with LiFePO₄ cathode can deliver the initial discharge capacity of ca. 154 mA·h/g at 0.1 C and the reversible capacity of ca. 132 mA·h/g after 70 cycles with high Coulombic efficiency of 99.5% at 55℃. Therefore, this study demonstrates a rapid and energy efficient sintering strategy for fabricating the solid electrolyte with dense structure and high ionic conductivity that can be practically applied in solid-state lithium metal batteries with high energy densities and safeties.