Polyphenolic QTOF-ESI MS Characterization and the Antioxidant and Cytotoxic Activities of Prunus domestica Commercial Cultivars from Costa Rica

There is an increased interest in plum research because of their metabolites’ potential bioactivities. In this study, the phenolic profiles of Prunus domestica commercial cultivars (Methley, Pisardii and Satsuma) in Costa Rica were determined by Ultra Performance Liquid Chromatography coupled with High Resolution Mass Spectrometry using a quadrupole-time-of-flight analyzer (UPLC-ESI-QTOF MS) on enriched phenolic extracts obtained through Pressurized Liquid Extraction (PLE) under acidic and neutral extraction conditions. In total, 41 different phenolic compounds were identified in the skin and flesh extracts, comprising 11 flavan-3-ols, 14 flavonoids and 16 hydroxycinnamic acids and derivatives. Neutral extractions for the skins and flesh from all of the cultivars yielded a larger number of compounds, and were particularly rich in the number of procyanidin trimers and tetramers when compared to the acid extractions. The total phenolic content (TPC) and antioxidant potential using the DPPH and ORAC methods exhibited better results for neutral extracts with Satsuma skins and Methley flesh, which showed the best values (685.0 and 801.6 mg GAE/g extract; IC₅₀ = 4.85 and 4.39 µg/mL; and 12.55 and 12.22 mmol TE/g extract, respectively). A Two-Way ANOVA for cytotoxicity towards AGS gastric adenocarcinoma and SW620 colon adenocarcinoma indicated a significant difference (p < 0.05) for PLE conditions, with better results for neutral extractions, with Satsuma skin delivering the best results (IC₅₀ = 60.7 and 46.7 µg/mL respectively) along with Methley flesh (IC₅₀ = 76.3 and 60.9 µg/mL, respectively). In addition, a significant positive correlation was found between TPC and ORAC (r = 0.929, p < 0.05), as well as a significant negative correlation (p < 0.05) between TPC and cytotoxicity towards AGS and SW620 cell lines (r = −0.776, and −0.751, respectively). A particularly high, significant, negative correlation (p < 0.05) was found between the number of procyanidins and cytotoxicity against the AGS (r = −0.868) and SW620 (r = −0.855) cell lines. Finally, the PCA clearly corroborated that neutral extracts are a more homogenous group exhibiting higher antioxidant and cytotoxic results regardless of the part or cultivar; therefore, our findings suggest that PLE extracts under neutral conditions would be of interest for further studies on their potential health benefits.     

A multiresidual method based on ion-exchange chromatography with conductivity detection for the determination of biogenic amines in food and beverages

In the present work a sensitive and accurate method by ion chromatography and conductimetric detection has been developed for the determination of biogenic amines in food samples at microgram per kilogram levels. The optimized extraction procedure of trimethylamine, triethylamine, putrescine, cadaverine, histamine, agmatine, spermidine, and spermine from real samples, as well as the separation conditions based on a multilinear gradient elution with methanesulfonic acid and the use of a weak ionic exchange column, have provided excellent results in terms of resolution and separation efficiency. Extended calibration curves (up to 200 mg/kg, r?>?0.9995) were obtained for all the analyzed compounds. The method gave detection limits in the range 23–65 μg/kg and quantification limits in spiked blank real samples in the range 65–198 μg/kg. Recovery values ranged from 82 to 103 %, and for all amines, a good repeatability was obtained with precision levels in the range 0.03–0.32 % (n?=?4). The feasibility and potential of the method were tested by the analysis of real samples, such as tinned tuna fish, anchovies, cheese, wine, olives, and salami.

Thermal evaluation of cashew nutshell liquid as new bioadditives for poly(methyl methacrylate)

In this study, the thermal-oxidative stability of poly(methyl methacrylate), PMMA, 1 % additivated with replenishable phenolic lipids is evaluated by thermogravimetric (TG/DTG) analyses and differential scanning calorimetry (DSC) analyses. Since technical cashew nutshell liquid (CNSL), a byproduct from the cashew industry, is composed basically of two phenolic lipids, cardanol and cardol, the utilization of this industrial waste and its main components as a new source of bioadditives for use as antioxidants is evaluated. The TG analyses revealed that addition of the phenolic constituent of CNSL increased the thermal stability of PMMA films considerably. The results obtained were also confirmed by DSC analyses.     

Fluorescent behavior of B-phycoerythrin in microemulsions of aerosol OT/water/isooctane

Taking advantage of its unusual fluorescent properties, the incorporation of B-phycoerythrin (B-PE) in aerosol OT (AOT, sodium bis-(2-ethylhexyl) sulphosuccinate)/water/isooctane microemulsions was investigated by following their steady-state and time-resolved fluorescence as a function of the water-to-surfactant molar ratio, w(0). The fluorescent intensity at 575 nm increased continuously with increasing water content, saturating at a w(0) around 35 and staying practically constant at w(0)> or =40. The steady-state anisotropy showed an initial increase with increasing water content until w(0)=23 and then decreased strongly, staying practically constant when w(0)> or =40. The values of the fluorescent parameters, anisotropy and fluorescent intensity, were unchanged when the water content of the system increased in the range between w(0)=40 to 50. This implies the effective incorporation of B-PE in the microemulsion droplets with w(0)> or =40, as well as the equilibrium of the dispersion at these water/surfactant ratios, since higher water content does not affect the main surrounding microenvironment of the protein. The overall incorporation in the microemulsion droplets caused minor spectroscopic changes with respect to biliprotein in aqueous solution of 20 mM sodium phosphate buffer, pH 7.0, such as a blue absorption shift of 3 nm and an emission shift of 1.5 nm, as well as a slight increase in excitation anisotropy spectrum mainly caused by a decrease in protein mobility. Therefore, there are no important interactions between the chromophores and the AOT sulfonate head groups. Emission intensity decays followed complex kinetics in both aqueous and dispersion media. The stability with time and temperature of the biliprotein in the microemulsion was higher than in the aqueous solution. All the results can be explained in terms of B-PE inclusion in the water droplets of AOT microemulsions where the protein has similar configuration and conformation to that in aqueous solution but with the chromophores more protected.     

Synthesis of a cyclic peptide containing norlanthionine: effect of the thioether bridge on peptide conformation

Two diastereomeric analogues of ring C of nisin incorporating a novel norlanthionine residue have been synthesized via a triply orthogonal protecting group strategy. A full structural study was carried out by NMR, which elucidated the conformational properties of the two peptides and enabled the identity of each diastereoisomer to be proposed.     

Bridging fluorides and hard/soft mismatch in d6 and d8 complexes: the case of [Tl(mu-F)3Ru(PPh3)3

[RuCl2(PPh3)3] reacts with thallium(I) fluoride to give either [Tl(mu-F)3Ru(PPh3)3] (1) or [Tl(mu3-F)(mu2-Cl)2Ru2(mu2-Cl)(mu2-F)(PPh3)4] (2) depending on the excess of TlF used. Both 1 and 2 were fully characterized, including X-ray structure determinations. Complex 1 reacts with dihydrogen to form the known ruthenium hydride complex [Ru(H)2(H2)(PPh3)3] upon hydrogenolysis of the Ru-F bond. The reaction of 1 with activated alkyl bromides (R-Br) gives the corresponding alkyl fluorides and the trinuclear complex [Tl(mu3-F)(mu2-F)(mu2-X)Ru2(mu2-Br)(mu2-F)(PPh3)4] (X=Br, F) (3), whose structure closely resembles that of 2. However, 1 is not active as catalyst for the nucleophilic fluorination of R-Br in the presence of thallium fluoride. The effect of the bridging coordination mode of fluoride on the Ru-F bond is discussed in terms of the HSAB principle, which suggests a more general model for predicting the stability of d6 and d8 complexes containing hard ligands (such as fluoro, oxo, and amido).     

Substituent control of hydrogen bonding in palladium(II)-pyrazole complexes

Inter- and intramolecular hydrogen bonding of an N-H group in pyrazole complexes was studied using ligands with two different groups at pyrazole C-3 and C-5. At C-5, groups such as methyl, i-propyl, phenyl, or tert-butyl were present. At C-3, side chains L-CH(2)- and L-CH(2)CH(2)- (L = thioether or phosphine) ensured formation of chelates to a cis-dichloropalladium(II) fragment through side-chain atom L and the pyrazole nitrogen closest to the side chain. The significance of the ligands is that by placing a ligating side chain on a ring carbon (C-3), rather than on a ring nitrogen, the ring nitrogen not bound to the metal and its attached proton are available for hydrogen bonding. As desired, seven chelate complexes examined by X-ray diffraction all showed intramolecular hydrogen bonding between the pyrazole N-H and a chloride ligand in the cis position. In addition, however, intermolecular hydrogen bonding could be controlled by the substituent at C-5: complexes with either a methyl at C-5 or no substituent there showed significant intermolecular hydrogen bonding interactions, which were completely avoided by placing a tert-butyl group at C-5. The acidity of two complexes in acetonitrile solutions was estimated to be closer to that of pyridinium ion than those of imidazolium or triethylammonium ions.     

Development of new high‐performance visible light photoinitiators based on carbazole scaffold and their applications in 3d printing and photocomposite synthesis

In this article, new compounds based on the carbazole scaffold (DMs = DM1 and DM2, constituted by a carbazole unit connected on positions 3 and 6 to a two 4,4′‐dimethoxydiphenylamine groups and differing by the substituent present on the nitrogen heteroatom of the carbazole core) were synthesized and proposed as high‐performance visible light photoinitiators/photosensitizers for both the free‐radical polymerization of methacrylates and the cationic polymerization of epoxides upon visible light exposure using LED@405 nm. Remarkably, DM2 leads to higher final conversions than DM1. In order to study the photophysical and photochemical properties of the carbazole derivatives, different parameters were taken into account such as the light absorption, the steady‐state photolysis, and the fluorescence spectroscopy. Using different techniques such as fluorescence quenching, redox behavior, and cyclic voltammetry, we are able to discuss the photosensitization/photoinitiation reactions providing a full coherent picture of the involved chemical mechanisms. The photosensitization of the carbazole derivatives occurred predominantly via singlet excited states at the rate of the diffusion limit. Upon exposure to laser diode at 405 nm, DMs show high performance in initiating systems for 3D resins. Remarkably, DM2 can also be used in photocomposite synthesis using light‐emitting diode conveyor. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2081–2092