Optimization incentive and relative riskiness in experimental stag-hunt games

We compare the experimental results of three stag-hunt games. In contrast to Battalio et al. (Econometrica 69:749–764, 2001), our design keeps the riskiness ratio of the two strategies at a constant level as the optimization premium is increased. We define the riskiness ratio as the relative payoff range of the two strategies. We find that decreasing the riskiness ratio while keeping the optimization premium constant decreases sharply the frequency of the payoff-dominant equilibrium strategy. On the other hand an increase of the optimization premium with a constant riskiness ratio has no effect on the choice frequencies. Finally, we confirm the dynamic properties found by Battalio et al. that increasing the optimization premium favours best-response and sensitivity to the history of play.     

Synthesis,Characterization and Theoretical Study of the Chemical Reactivity of New Cyclic Sulfamides Linked to Tetrathiafulvalene

Abstract

The synthesis of the title compounds has been carried out by condensation via a Wittig-type reaction of a pyridinium hexafluorophosphate with a phosphonate ester to give the desired (4-nitrophenyl)tetrathiafulvalene the nitro group of which was reduced to an amino group. Reaction of the amine with chlorosulfonyl isocyanate and subsequently with tert-butyl alcohol gave the corresponding open-chain sulfamide. Cyclization under basic conditions and de-protection led to 2-[4-(4′,5′-dipropyltetrathiafulvalen-4-yl)]phenyl-1,2,6-thiadiazinane 1,1-dioxide. Finally, N-alkylated and N-acylated cyclic sulfamides linked to tetrathiafulvalene were obtained. Their electron donor ability was measured by cyclic voltammetry. A detailed DFT study based on B3LYP/6–31G (d,p) of electronic properties is also presented. The calculated molecular electrostatic potential shows that, the negative charge covers the nitro and sulfamide function, while positive charge is located at the hydrogen atoms of the amine and sulfamide rings. The calculated HOMO and LUMO energy reveals that charge transfer occurs within the molecule. The chemical reactivity parameters reveal that tetrathiafulvalene 1 is highly reactive, which facilitates the desired formation of the cyclic sulfamide. The first hyperpolarizability β_tot shows that compounds 1 and 5 are good candidates as a NLO material.     

Synthesis of 3-methyl-7-[2-(dimethylaminoethyl)oximino]-5-arylcyclopenta [F] Benzoxazolinones,Potential Ligands of the 5HT1D Receptors

The synthesis of 3-methyl-7-[2-(dimethylaminoethyl)oximino]-5-arylcyclopenta [f] benzoxa-zolinones, potential ligands of the 5HT_1D receptors is described through a 4 steps reaction strategy from 3-methyl-6-acetyl benzoxazolinone.     

Investigation of 7-((dioctylamino)methyl)quinoline-8-ol for uptake and removal of uranyl ions

A new 8-hydroxyquinoline derivative extractant was synthesized via the Mannich reaction from a secondary amine. Various analytical techniques (¹H, ¹³C NMR, FTIR, mass spectroscopy) were used to characterize our product. The use of this new extractant for the uptake and removal of uranyl ions in aqueous solution was investigated. Conditions for an effective sorption were optimized with respect to different experimental parameters in batch process. The results showed that the extraction rate increases for solutions with a pH in the range [0.65–1.13]. The total sorption capacity was 105 (mg g^?1) under optimum experimental conditions. The extraction of UO₂ ²⁺ was found to be quantitative (100 %) at initial uranyl concentration less than or equal to 41.59 mg/L. Thermodynamic parameters showed the adsorption of an endothermic process and a spontaneous nature, respectively.     

Efficient Access to Peptidyl‐RNA Conjugates for Picomolar Inhibition of Non‐ribosomal FemXWv Aminoacyl Transferase

Peptidyl–RNA conjugates have various applications in studying the ribosome and enzymes participating in tRNA‐dependent pathways such as Fem transferases in peptidoglycan synthesis. Herein a convergent synthesis of peptidyl–RNAs based on Huisgen–Sharpless cycloaddition for the final ligation step is developed. Azides and alkynes are introduced into tRNA and UDP‐MurNAc‐pentapeptide, respectively. Synthesis of 2′‐azido RNA helix starts from 2′‐azido‐2′‐deoxyadenosine that is coupled to deoxycytidine by phosphoramidite chemistry. The resulting dinucleotide is deprotected and ligated to a 22‐nt RNA helix mimicking the acceptor arm of Ala‐tRNA^Ala by T4 RNA ligase. For alkyne UDP‐MurNAc‐pentapeptide, meso‐cystine is enzymatically incorporated into the peptidoglycan precursor and reduced, and L ‐Cys is converted to dehydroalanine with O‐(mesitylenesulfonyl)hydroxylamine. Reaction of but‐3‐yne‐1‐thiol with dehydroalanine affords the alkyne‐containing UDP‐MurNAc‐pentapeptide. The Cu^I‐catalyzed azide alkyne cycloaddition reaction in the presence of tris[(1‐hydroxypropyl‐1H‐1,2,3‐triazol‐4‐yl)methyl]amine provided the peptidyl‐RNA conjugate, which was tested as an inhibitor of non‐ribosomal FemX_Wv aminoacyl transferase. The bi‐substrate analogue was found to inhibit FemX_Wv with an IC₅₀ of (89±9) pM , as both moieties of the peptidyl–RNA conjugate contribute to high‐affinity binding.     

Development and validation of a sensitive thermal desorption–gas chromatography–mass spectrometry (TD-GC-MS) method for the determination of phosgene in air samples

A new rapid, sensitive and reliable method was developed for the determination of phosgene in air samples using thermal desorption (TD) followed by gas chromatography–mass spectrometry (GC-MS). The method is based on a fast (10 min) active sampling of only 1 L of air onto a Tenax® GR tube doped with 0.5 mL of derivatizing mixture containing dimercaptotoluene and triethylamine in hexane solution. Validation of the TD-GC-MS method showed a low limit of detection (40 ppbv), acceptable repeatability, intermediate fidelity (relative standard deviation within 12 %) and excellent accuracy (>95 %). Linearity was demonstrated for two concentration ranges (0.04 to 2.5 ppmv and 2.5 to 10 ppmv) owing to variation of derivatization recovery between low and high concentration levels. Due to its simple on-site implementation and its close similarity with recommended operating procedure (ROP) for chemical warfare agents vapour sampling, the method is particularly useful in the process of verification of the Chemical Weapons Convention.

Photoactivatable V-Shaped Bifunctional Quinone Methide Precursors as a New Class of Selective G-quadruplex Alkylating Agents

Combining the selectivity of G-quadruplex (G4) ligands with the spatial and temporal control of photochemistry is an emerging strategy to elucidate the biological relevance of these structures. In this work, we developed six novel V-shaped G4 ligands that can, upon irradiation, form stable covalent adducts with G4 structures via the reactive intermediate, quinone methide (QM). We thoroughly investigated the photochemical properties of the ligands and their ability to generate QMs. Subsequently, we analyzed their specificity for various topologies of G4 and discovered a preferential binding towards the human telomeric sequence. Finally, we tested the ligand ability to act as photochemical alkylating agents, identifying the covalent adducts with G4 structures. This work introduces a novel molecular tool in the chemical biology toolkit for G4s.     

Graphene Nanocomposites Based Electrochemical Sensing Platform for Simultaneous Detection of Multi-drugs

Three reduced graphene oxide nanocomposites were employed to achieve the simultaneous electrochemical determination of multi-drugs including acetaminophen (ACTM), carbendazim (CB) and ciprofloxacin (CFX). All nanocomposite modified electrodes showed improved current responses for three drugs. Notably cauliflower-like platinum nanoparticles decorated reduced graphene oxide modified electrode (or Pt−RGO/GCE) exhibited the best performance in terms of electrochemical stability. Using Pt−RGO/GCE, the linear detect ranges of 30–120 μM, 25–115 μM and 10–25 μM, and detection limit values of 3.49, 2.96, and 1.53 μM were achieved for ACTM, CB and CFX respectively. The electrode was further used for the successful determination of above drugs in tap and river water using differential pulse voltammetry. From the obtained results, we believe that Pt-RGO/GCE is highly promising for the fabrication of robust electrochemical sensors for simultaneously determining ACTM, CB and CFX or similar types of drugs in the future.     

Adding Value in Production of Multifunctional Polylactide (PLA)–ZnO Nanocomposite Films through Alternative Manufacturing Methods

Due to the added value conferred by zinc oxide (ZnO) nanofiller, e.g., UV protection, antibacterial action, gas-barrier properties, poly(lactic acid) (PLA)–ZnO nanocomposites show increased interest for utilization as films, textile fibers, and injection molding items. The study highlights the beneficial effects of premixing ZnO in PLA under given conditions and its use as masterbatch (MB), a very promising alternative manufacturing technique. This approach allows reducing the residence time at high processing temperature of the thermo-sensitive PLA matrix in contact of ZnO nanoparticles known for their aptitude to promote degradation effects onto the polyester chains. Various PLA–ZnO MBs containing high contents of silane-treated ZnO nanoparticles (up to 40 wt.% nanofiller specifically treated with triethoxycaprylylsilane) were produced by melt-compounding using twin-screw extruders. Subsequently, the selected MBs were melt blended with pristine PLA to produce nanocomposite films containing 1–3 wt.% ZnO. By comparison to the more traditional multi-step process, the MB approach allowed the production of nanocomposites (films) having improved processing and enhanced properties: PLA chains displaying higher molecular weights, improved thermal stability, fine nanofiller distribution, and thermo-mechanical characteristic features, while the UV protection was confirmed by UV-vis spectroscopy measurements. The MB alternative is viewed as a promising flexible technique able to open new perspectives to produce more competitive multifunctional PLA–ZnO nanocomposites.