The composition analysis of YBa2Cu3O7-δ or PrBa2Cu3O7-δ thin films and (YBa2Cu3O7-δ/PrBa2Cu3O7-δ)n heterostructures prepared by CVD

Some YBa₂Cu₃O_7-δ films and heterostructures prepared by Chemical Vapor Deposition (CVD) were analyzed in our laboratories by EPMA-EDX or WDX, RBS, SNMS and AES. It was found that in some cases the results of composition analysis can significantly deviate from each other. At least two main reasons for these deviations exist: the different lateral resolution and the application of different reference samples for the calibration. Received: 3 June 1996 / Revised: 14 October 1996 / Accepted: 16 October 1996     

Structural characterisation of a sol-gel copolymer synthesised from aliphatic and aromatic alkoxysilanes using 29Si-NMR spectroscopy

A hybrid organic-inorganic material was prepared from the hydrolytic co-condensation of 3-trimethoxysilylpropylmethacrylate (MAPTMS) and diphenyldiethoxysilane (DPHDES). The synthesis was performed in three steps: (1) MAPTMS pre-hydrolysis, (2) addition of DPHDES, and (3) further hydrolysis of the obtained mixture. ²⁹Si nuclear magnetic resonance spectroscopy was used to characterise the structural evolution of the mineral network during the synthesis. It revealed the catalytic effect of DPHDES on the condensation reaction of silanol groups, initially observed for pre-hydrolysed MAPTMS. In addition, it was clearly demonstrated that the formation of the highest condensed species of the aromatic oligomers (D₂ species) occurred only in the presence of aliphatic oligomers, which decrease the sterical hindrance about the silicon nuclei.     

Simple and rapid enzymatic assay of ornithine decarboxylase activity

Since the induction of putrescine synthesis by ornithine decarboxylase (ODC) is observed in many pathological and physiological processes, a useful and simple method to assay this enzyme activity should be an interesting tool to quantify the biological importance of its induction. An enzymatic method to assay ODC is reported here. This method is based on the reaction between putrescine and soya diamine oxidase. The reaction releases H(2)O(2), which is measured by a colorimetric method. The validation of this method showed good accuracy (98+/-5% of recovery). High precision and reproducibility were obtained. A linearity with a correlation coefficient of 0.999 in the range of 2.5-25 nmol was obtained. This method is also rugged and specific. The application of the assay of ODC activity showed that it is useful as a rapid and simple tool for assaying ODC activity in vitro. Comparison with the HPLC determination of ODC activity shows strong correlation along with the high accuracy of the two methods.     

Assignment of the EPR spectrum of 5,5-dimethyl-1-pyrroline N-oxide (DMPO) superoxide spin adduct

[structure: see text] Spin trapping consists of using a nitrone or a nitroso compound to "trap" an unstable free radical as a long-lived nitroxide that can be characterized by electron paramagnetic resonance (EPR) spectroscopy. The formation of DMPO-OOH, the spin adduct resulting from trapping superoxide (O(2)(*)(-)) with 5,5-dimethyl-1-pyrroline N-oxide (DMPO), has been exploited to detect the generation of superoxide in a wide variety of biological and chemical systems. The 12-line EPR spectrum of DMPO-OOH has been either reported or mentioned in more than a thousand papers. It has been interpreted as resulting from the following couplings: A(N) approximately 1.42 mT, A(H)beta approximately 1.134 mT, and A(H)gamma(1H) approximately 0.125 mT. However, the DMPO-OOH EPR spectrum has an asymmetry that cannot be reproduced when the spectrum is calculated considering a single species. Recently, it was proposed that the 0.125 mT splitting was misassigned and actually results from the superimposition of two individual EPR spectra associated with different conformers of DMPO-OOH. We have prepared 5,5-dimethyl-[3,3-(2)H(2)]-1-pyrroline N-oxide (DMPO-d(2)), and we showed that the EPR spectrum of the corresponding superoxide spin adduct is composed of only six lines, in agreement with the assignment of the 0.125 mT splitting to a gamma-splitting from a hydrogen atom bonded to carbon 3 of DMPO. This result was supported by DFT calculations including water solvation, and the asymmetry of the DMPO-OOH EPR spectrum was nicely reproduced assuming a chemical exchange between two conformers.     

Reaction de metathese des olefines induite photochimiquement en presence d'un complexe de metal de transition : V. Intervention d'un complexe dinucleaire du tungstene

The photoinduced metathesis [W(CO)₆CCl₄hν] of cis- and trans-RCH=CHMe gives 2-butene in a very high trans but low cis stereoselectivity. Propene behaves like a cis olefin. These results are consistent with the proposal of a dinuclear tungsten intermediate, which requires high steric constraints in the transalkylidenation step.     

Unraveling the crystallization mechanism of CoAPO-5 molecular sieves under hydrothermal conditions

The hydrothermal crystallization of CoAPO-5 molecular sieves has been studied using time-resolved in-situ SAXS/WAXS, UV-vis, Raman, and XAS. Data collected during heating to 180 degrees C allowed the observation of different steps occurring during the transformation of the amorphous gel into a crystalline material from a macroscopic and atomic perspective. Raman spectroscopy detected the initial formation of Al-O-P bonds, whereas SAXS showed that these gel particles had a broad size distribution ranging from ca. 7 to 20 nm before crystallization began. WAXS showed that this crystallization was sharp and occurred at around 160 degrees C. Analysis of the crystallization kinetics suggested a one-dimensional growth process. XAS showed that Co(2+) transformed via a two-stage process during heating involving (i) a gradual transformation of octahedral coordination into tetrahedral coordination before the appearance of Bragg peaks corresponding to AFI, suggesting progressive incorporation of Co(2+) into the poorly ordered Al-O-P network up to ca. 150 degrees C, and (ii) a rapid transformation of remaining octahedral Co(2+) at the onset of crystallization. Co(2+) was observed to retard crystallization of AFI but provided valuable information regarding the synthesis process by acting as an internal probe. A three-stage, one-dimensional crystallization mechanism is proposed: (i) an initial reaction between aluminum and phosphate units forming a primary amorphous phase, (ii) progressive condensation of linear Al-O-P chains forming a poorly ordered structure separated by template molecules up to ca. 155 degrees C, and (iii) rapid internal reorganization of the aluminophosphate network leading to crystallization of the AFI crystal structure.     

REALISIS: a medicinal chemistry-oriented reagent selection, library design, and profiling platform

REALISIS is a software system for reagent selection, library design, and profiling, developed to fit the workflow of bench chemists and medicinal chemists. Designed to be portable, the software offers a comprehensive graphical user interface and rapid, integrated functionalities required for reagent retrieval and filtering, product enumeration, and library profiling. REALISIS is component-based, consisting of four main modules: reagent searching; reagent filtering; library enumeration; and library profiling. Each module allows the chemist to access specific functionalities and diverse filtering and profiling mechanisms. By implementing the entire process of reagent selection, library design, and profiling and by integrating all the necessary functionalities for this process, REALISIS cuts the time required to design combinatorial and noncombinatorial libraries from several days to a few hours.     

Microgels and ionic associations in solutions of cellulose diacetate

Solutions of cellulose diacetate (CDA) from two sources (cotton linters and wood pulp Floranier) were analysed in various solvents by size exclusion chromatography (SEC). Without special precautions, the SEC chromatograms presented three peaks — or prehumps — before the main polymer peak. The first prehump which could be eliminated by ultracentrifugation corresponded to microgels whose sugar composition was determined. These microgels were also investigated by electron microscopy, X-ray and electron diffraction analysis. They corresponded mainly to cellulose triacetate (CTA-II) in the case of CDA from cotton linters and a mixture of CTA-II and xylan diacetate (XDA) in the case of CDA from the wood pulp Floranier. The second and third prehumps could be attributed to ionic effects corresponding to the association of remaining sulfate groups on the CDA molecules with residual calcium. It was found that these ionic effects could be eliminated by the addition of LiBr or LiCl to the elution solvents. This led to chromatograms devoid of prehumps.Presented in part at the Cellulose '91 meeting in New Orleans.     

New dehydration in the pyrrolo[1,2–6-b]isoquinoline series. Preparation and structural identification of 3,5-dihydrobenz[f]indolizin-3-one

3,5-Dihydrobenz[f]indolizin-3-one was prepared by a novel dehydration reaction involving the heating of 1,2,3,5,10,10a-hexahydro[f]indolizine-3,10-dione with polyphosphoric acid. The structure of this new compound was established by X-ray crystallography, by nmr spectroscopy and by reduction to the known products 1,2,3,5-tetrahydrobenz[f]indolizin-3-one and 1,2,3,5,10,10a-hexahydrobenz[f]indolizin-3-one.