Ostwald ripening of protein-stabilized emulsions: effect of transglutaminase crosslinking

Ostwald ripening in n-alkane oil-in-water emulsions stabilized by sodium caseinate at neutral pH has been studied by monitoring time-dependent changes in the number-average droplet diameter and the droplet-size distribution. In qualitative agreement with theory, the destabilization rate has been shown to increase with reduction of the n-alkane chain length and on addition of ethanol to the aqueous phase. Replacement of caseinate by β-lactoglobulin also leads to improved stability, but addition of calcium ions does not. The potential use of transglutaminase-induced crosslinking of adsorbed protein as a way of inhibiting the Ostwald ripening of caseinate-stabilized emulsions has been examined. It is shown that enzymic crosslinking before emulsification can lead to a modest reduction in the coarsening rate at long storage times. Crosslinking of caseinate after emulsification produces enhanced stability at short times, but there is a catastrophic loss of stability at long times due to droplet coalescence.     

Atomic force microscopy studies of chemical–mechanical processes on silicon(100) surfaces

Atomic force microscopy (AFM) is used to examine chemical–mechanical processes on Si(100) surfaces. The AFM tip serves as a single asperity contact to exert tribological forces as well as an imaging tool. By scanning in chemically aggressive solutions, material removal can be observed directly. In the silicon system, high-force scans are used to remove oxide and initiate etching in selected locations, followed by low-force scans to image the resulting surfaces. Material removal rates were measured as a function of applied load, number of scans, solution composition, and time. In basic solution, places where the underlying silicon is exposed etch rapidly, producing structures 100 nm or less in size. Although the surface roughness initially increases during etching, the final surfaces are smooth. The oxide is extremely sensitive to applied stress: even very light scanning accelerates oxide dissolution. Once the oxide is removed, chemical etching proceeds through the underlying silicon with or without AFM scanning; but the silicon etches more rapidly if AFM scanning is continued, due to true chemical–mechanical (tribochemical) effects.     

Influence of molecular weight on nanoscale modification of poly(methyl methacrylate) due to simultaneous mechanical and chemical stimulation

We report observations of poly(methyl methacrylate) films modified by the synergistic effect of solvent exposure and mechanical stress applied by the tip of an atomic force microscope (AFM). We show that these modifications are sensitive to polymer molecular weight as well as solvent strength and the force applied by the tip. Small-area scanning often produces localized patches of raised material as well as depressed areas. The volume change associated with the depressed areas generally increases with increasing solvent strength, increasing applied normal force, and decreasing polymer molecular weight. In contrast, the volume change associated with the raised patches is greatest for 25-145K Mw films in 60 and 100% ethanol solutions. In each case, the normal force applied by the AFM tip must exceed a threshold to significantly modify the surface; this threshold is associated with an increase in lateral force applied by the AFM tip during small-area scanning. We attribute the raised patches to mechanically enhanced swelling due to diffusion of solvent into near-surface material. Permanent net volume loss, when observed, is attributed to localized polymer dissolution.     

Scanning-induced growth on single crystal calcite with an atomic force microscope

We report observations of localized growth on the (1014) surface of single-crystal CaCO3 in supersaturated solutions while scanning with the tip of an atomic force microscope (AFM). At low contact forces, AFM scanning strongly enhances deposition along preexisting steps. This enhancement increases rapidly with increasing solution supersaturation, and is capable of filling in multilayer etch pits to produce defect-free surfaces at the resolution of the AFM. Attempts to achieve similar deposition rates in the absence of scanning require high supersaturations that produce three-dimensional crystal nuclei, which are important defects. Localized deposition produced by drawing the AFM tip back and forth across step edges can produce monolayer deposits extending well over a micron from the scanned area. These tip-induced deposits provide convincing evidence for the importance of ledge diffusion in calcite crystal growth.     

Inside/outside Pt nanoparticles decoration of functionalised carbon nanofibers (Pt(19.2)/f-CNF(80.8)) for sensitive non-enzymatic electrochemical glucose detection

A highly efficient and reproducible approach for effective Pt nanoparticles dispersion and excellent decoration (inside/outside) of functionalised carbon nanofibers (f-CNF) is presented. The surface morphological, compositional and structural characterisations of the synthesised Pt(19.2)/f-CNF(80.8) material were examined using transmission electron microscopy (TEM/STEM/DF-STEM), energy-dispersive X-ray spectrometry (EDS), thermogravimetric analysis (TGA/DTG), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry (CV) was employed in order to confirm the typical electrochemical response for Pt. The aim of the work was to improve the utility of both the supporting matrix (via the use of both inner/outer surfaces of nanofibers) and precious Pt, together with the sensitive glucose determination. TEM data indicated successful nanoparticle decoration with average Pt particle size 2.4 nm. The studies demonstrated that utilisation of the inner surface of the nanofibers, together with the modified outer surface characteristics using chemical treatment, enables excellent decoration, effective dispersion and efficient impregnation of Pt nanoparticles on carbon nanofibers. Pt(19.2)/f-CNF(80.8) exhibited excellent amperometric response (sensitivity = 22.7 μAmM(-1)cm(-2) and LoD = 0.42 μM) towards direct glucose sensing, over the range 0-10 mM glucose, in neutral conditions (pH 7.4). The improved carbon surface area for nanoparticle decoration, inner surface structure and morphology of nanofibers together with the presence of functional groups provided strong interactions and stability. These features together with the effective nanoparticle dispersion and decoration resulted in excellent catalytic response. The decorated nanoscaled material (Pt(19.2)/f-CNF(80.8)) is capable of large scale production, providing sensing capability in neutral conditions, while eliminating the temperature sensitivity, pH and lifetime issues associated with glucose enzymatic sensors and holds great promise in the quantification of glucose in real clinical samples.     

On the number of polynomials with small discriminants in the Euclidean and <Emphasis Type="Italic">p</Emphasis>-adic metrics

In this article it is proved that there exist a large number of polynomials which have small discriminant in terms of the Euclidean and p-adic metrics simultaneously. The measure of the set of points which satisfy certain polynomial and derivative conditions is also determined.     

Accurate calculation of the scattering length for the cooling of hydrogen atoms by lithium atoms

An improved ab initio calculation has been performed for the potential for the LiH a ³Σ⁺ state, using two very large basis sets. The Basis Set Superposition Error (BSSE) correction has been determined for both basis sets and the non-Born-Oppenheimer correction estimated to be negligible. The best potential is approximately 10% deeper than the previous estimate. Vibrational energies and scattering lengths have been calculated for ^6,7LiH(D) with both potentials, with and without the BSSE correction, and also with an estimated potential expected to bracket the true potential. The ⁷LiH scattering length is estimated to be (45 ± 4)a₀ and hence the low-energy cross-section in the best a ³Σ⁺ potential is about half that calculated previously. Enhanced cooling by ⁷Li of trapped H atoms remains feasible. Received 30 April 2001     

Beating the System: Course Structure and Student Strategies in a Traditional Introductory Undergraduate Physics Course for Nonmajors

The purpose of this study was to describe relationships among instructor and student goals, course design, and student strategies for learning physics in a traditional introductory undergraduate physics course for nonmajors. The procedures included 16 hours ofnonparticipant observation, during which detailed field notes and photographs were taken and documents were collected. Audiotaped open-ended interviews were given to instructors and students, and all students participated in a limited survey. The data were analyzed using qualitative methods of the Chicago School. Results indicated that both differing goals of students and instructors and the structure of the course inhibited the understanding of physics and were conducive to students engaging in unexpected behaviors designed to help them successfully pass the course. The consequences of the structure of the course and subsequent student behaviors inhibited their understanding and appreciation of physics and deterred them from enrolling in further science courses. The paper includes implications for teaching introductory college physics.     

Dynamic SIMS analysis of cryo-prepared biological and geological specimens

The modification of a dynamic magnetic sector secondary ion mass spectrometry (SIMS) instrument to permit the analysis of frozen biological and geological samples is described. The SIMS instrument used for this study combines SIMS analysis with the generation of ion-induced secondary electron images, allowing direct superposition of the SIMS image onto the image of cellular structures. Secondary ion maps have been acquired with sub-micron resolution, permitting the characterisation of sub-cellular elemental distributions in plant cells and human fibroblast cells, as well as the distribution of chemical impurities at grain boundaries in polar ice samples. This cryo-preparation technique clearly extends the applicability of SIMS analysis to a wide range of samples.