隔离板对流向振荡圆柱尾流旋涡脱落的抑制

用隔离板对直径为D, 沿流向振荡的圆柱后涡脱落进行抑制. 隔离板放于圆柱尾流中心线上,控制参数包括隔离板长度L/D以及隔离板前缘到柱体振荡中心的距离G/D. 实验的雷诺数范围Re=V_∞D/v=1.01×10⁴～1.69×10⁴,柱体折减振频范围f_eD/V_∞=0～0.03, 柱体振幅固定为A/D=0.2. 风洞烟线显示和热线测量结果表明:当 G/D位于一个有效区域内时,可有效抑制振荡柱体尾流的旋涡脱落. 该有效区的大小随着隔离板板长的增大而增大, 随着Re数和圆柱振荡频率的增大而减小.     

Wind induced deformation and vibration of a Platanus acerifolia leaf

Deformation and vibration of twig-connected single leaf in wind is investigated experimentally.Results showthat the Reynolds number based on wind speed and lengthof leaf blade is a key parameter to the aerodynamic problem.In case the front surface facing the wind and with an increase of Reynolds number,the leaf experiences static deformation,large amplitude and low frequency sway,reconfiguration to delta wing shape,flapping of tips,high frequencyvibration of whole leaf blade,recovery of delta wing shape,and twig-leaf coupling vibration.Abrupt changes from onestate to another occur at critical Reynolds numbers.In casethe back surface facing the wind,the large amplitude andlow frequency sway does not occur,the recovered delta wingshape is replaced by a conic shape,and the critical Reynoldsnumbers of vibrations are higher than the ones corresponding to the case with the front surface facing the wind.Apair of ram-horn vortex is observed behind the delta wingshaped leaf.A single vortex is found downstream of theconic shaped leaf.A lift is induced by the vortex,and thislift helps leaf to adjust position and posture,stabilize bladedistortion and reduce drag and vibration.     

三氧化钨/氧化银复合材料的水热法合成及其光催化降解性能研究

染料污染是水污染中最严重的问题之一,吸引了很多科学家的关注.人们尝试了很多方法去解决该问题,如化学氧化法、物理吸附法、光催化降解法和生物降解法等.与其他几种方法相比,光催化法有着低能耗、环保以及高效等优势.三氧化钨是常见的半导体材料,具有独特的光学性能,近年来受到了广泛的研究.本文以钨酸钠和硫脲为前驱体,通过水热法制备了三氧化钨/氧化银(WO_3/Ag_2O)复合材料,并用光催化降解亚甲基蓝来分析其光催化性能.通过X射线光电子能谱、X射线衍射、透射电子显微镜、扫描电子显微镜、紫外可见吸收光谱等表征手段对样品的形貌、晶格结构和光催化的性能进行表征.氧化银的带宽为1.2 e V,对可见光很敏感,三氧化钨和氧化银的复合使材料在可见光下的光催化活性显著增强,在可见光下对亚甲基蓝染料的光降解率可以达到98%.实验结果表明,复合材料中的三氧化钨纳米棒为六方相,其平均直径约为200 nm,平均长度约为4μm.而复合材料中的氧化银纳米颗粒为六方相,附着在氧化钨纳米棒的表面,平均晶粒尺寸为20 nm.氧化银的存在为复合材料提供了更多的反应活性位点.相较于单一组分,复合材料在可见光下的光吸收度更高,这说明三氧化钨和氧化银的复合改变了材料的能带结构.研究发现,三氧化钨和氧化银之间形成的异质结构是其优良光催化性能的来源.此外,三氧化钨和氧化银复合材料还具有良好的催化稳定性和化学稳定性.本文结果表明,可以通过给宽带隙的半导体材料复合一些带隙合适的金属氧化物以提升其光催化活性.     

金纳米四面体增强有机太阳电池光吸收及光伏性能研究

为增强有机太阳能电池的光利用率,提高能量转换效率,本文合成了金四面体形状的纳米粒子,并用聚苯乙烯磺酸钠(PSS)包裹形成了核壳结构的金纳米四面体(Au@PSS tetrahedra NPs).将其掺杂到有机太阳能电池空穴提取层与活性层的界面处,利用表面等离子体共振效应来增强活性层对光的吸收,从而提高有机太阳能电池的能量转换效率.研究了掺杂浓度和PSS包裹厚度对电池性能的影响.结果表明:掺杂浓度为6%时,器件性能最佳,能量转换效率达到3.08%; PSS壳层厚度优化为2.5 nm时,转换效率达到3.65%,较标准电池提升了22.9%.电池性能的改善主要源于金四面体纳米粒子的共振吸收峰位于给体材料吸收谱范围内,纳米粒子的共振促进了给体的吸收,同时PSS壳层的引入促进了激子的解离和电荷的转移,上述因素的改善提升了电池的短路电流、填充因子和转换效率.     

非对称双原子分子在输运扩散中的取向效应

本文建立了同时具有化学势梯度和温度梯度的非平衡系统,研究非对称双原子分子的输运扩散行为.研究发现,双原子分子在非平衡输运中具有取向效应.浓度梯度与温度梯度使双原子分子在输运中产生的大小原子取向的方向刚好相反,沿着梯度的正方向,前者使小原子在前,后者使大原子在前.通过最小熵产生原理,解释了取向的物理机制.研究结果对于深刻理解非平衡条件下物质的输运与其形态的关系具有理论意义.     

Superfluid response in heavy fermion superconductors

Motivated by a recent London penetration depth measurement [H. Kim, et al., Phys. Rev. Lett. 114, 027003 (2015)] and novel composite pairing scenario [O. Erten, R. Flint, and P. Coleman, Phys. Rev. Lett. 114, 027002 (2015)] of the Yb-doped heavy fermion superconductor CeCoIn₅, we revisit the issue of superfluid response in the microscopic heavy fermion lattice model. However, from the literature, an explicit expression for the superfluid response function in heavy fermion superconductors is rare. In this paper, we investigate the superfluid density response function in the celebrated Kondo–Heisenberg model. To be specific, we derive the corresponding formalism from an effective fermionic large-N mean-field pairing Hamiltonian whose pairing interaction is assumed to originate from the effective local antiferromagnetic exchange interaction. Interestingly, we find that the physically correct, temperature-dependent superfluid density formula can only be obtained if the external electromagnetic field is directly coupled to the heavy fermion quasi-particle rather than the bare conduction electron or local moment. Such a unique feature emphasizes the key role of the Kondo-screening-renormalized heavy quasi-particle for low-temperature/energy thermodynamics and transport behaviors. As an important application, the theoretical result is compared to an experimental measurement in heavy fermion superconductors CeCoIn5 and Yb-doped Ce_1?xYb_xCoIn₅ with fairly good agreement and the transition of the pairing symmetry in the latter material is explained as a simple doping effect. In addition, the requisite formalism for the commonly encountered nonmagnetic impurity and non-local electrodynamic effect are developed. Inspired by the success in explaining classic 115-series heavy fermion superconductors, we expect the present theory will be applied to understand other heavy fermion superconductors such as CeCu₂Si₂ and more generic multi-band superconductors.     

基于DSP的航天器压力变化检漏仪的设计

航天器的密封性能是极其重要的指标之一,利用压力变化方法进行舱体密封性检漏是保障其密封性的重要技术手段;设计研制小型压力变化检漏仪对满足航天器检漏设备小型集成化、高精度的迫切需求是十分重要的;以DSP为数据的核心处理器,分析绝压和差压具有温度补偿方法,设计基于485通信接口实现数字绝压传感器的数据采集,采用250Ω的高精度电阻接入电流环的方法实现差压传感器的信号调理,通过ADS1247高精度24位数模转换器实现差压信号的采集;并采用恒流供电和电阻比测量原理实现对两路热敏电阻温度传感器的测量;各信号经DSP中固化的压力变化检漏算法集中处理,得到被测物体的漏率值,检测结果通过LCD显示。所研制集绝压、差压和温度多参量监测于一体的检漏仪,经过温度、压力、检漏试验等测试,验证了其精度和检漏能力满足要求;研究结果表明：所研制的检漏仪小巧,精度高,可靠性高,可实现压力、温度、漏率等多参量的同时监测,漏率检测的最大相对误差为19.3%,相对不确定度小于2%,可有效地解决航天器泄漏检测的问题。     

20 keV质子在聚碳酸酯微孔膜中传输的动态演化过程

测量了20 ke V质子穿过倾斜角为+1?的聚碳酸酯微孔膜后,出射粒子的位置分布、相对穿透率以及电荷纯度随时间的演化.实验发现,能量电荷比E/q≈10~1k V的质子穿过绝缘纳米微孔的物理机理与E/q≈10~0k V和E/q≈10~2k V区域离子有显著不同.对于E/q≈10~1k V的质子穿过绝缘纳米微孔,存在一段相当长的导向建立之前(导向前)的过程,在该时期内出射质子及氢原子的特性和导向建立后的特性有很大差异.在导向前的演化过程中,我们可以观察到出射质子的峰位逐渐向孔轴向附近转移;出射氢原子由束流方向的尖峰以及孔轴向的主峰构成,峰位角保持基本不变且尖峰逐渐消失.这一过程的主要机理为微孔内表面以下的多次随机二体碰撞和近表面镜面反射两种传输方式逐步向电荷斑约束下的"导向效应"过渡的过程.对E/q≈10~1k V区间离子"导向前过程"的完整观测,使得对低能向中能过渡区间离子穿过绝缘微孔膜物理机制和图像有更深入和完整的认识,有助于约10 ke V离子微束的精确控制和应用.     

Cu原子掺杂调控三聚氰胺在Au(111)表面自组装结构

The doping effect of Cu on the self-assembly film of melamine on an Au(111) surface has been investigated with scanning tunneling microscopy (STM). The evaporated Cu adatoms occupy the positions underneath the amino groups and change the hydrogen bonding pattern between the melamine molecules. Accordingly, the self-assembly structure has changed stepwise from a well-defined honeycomb into a track-like and then a triangular structure depending on the amount of Cu adatoms. The interaction between Cu adatom and melamine is moderate thus the Cu adatoms can be released upon mild heating to around 100℃. These findings are different from previous observations of either the coordination assembly or the physically trapped metal adatoms.