Electrochemical Assay to Quantify the Hydroxyl Radical Scavenging Activity of Medicinal Plant Extracts

A new electrochemical assay has been developed which is based on quantifying the attack of OH^. radicals on a self‐assembled thiol monolayer on electrodes in the presence and absence of antioxidants. The OH^. radicals were produced in Fenton solutions. The radical scavengers diminish the concentration of the OH^. radicals in the Fenton solution, and the extent of thiol layer destruction is monitored with the help of a redox probe in solution, the signal of which is only generated at SAM‐free electrode surface. The results of the electrochemical assay were compared with those of the standard DPPH^. assay. In case of each plant extract, an excellent linear correlation was observed between the radical scavenging activity and the concentration of plant extracts; however, the scavenging properties of different plants strongly differ in the electrochemical and the DPPH^. assay. Since the proposed new method probes the reactivity of radical scavengers towards OH^., one of the most important reactive oxygen radicals in tissues, it is supposed to provide much more relevant information than the DPPH^. or other assays.     

Determination of synthetic pharmaceuticals in phytotherapeutics by capillary zone electrophoresis with contactless conductivity detection (CZE-CD)

In this work, a method for simultaneous determination of amfepramone, fenproporex, sibutramine and fluoxetine was developed by capillary zone electrophoresis with capacitively coupled contactless conductivity detection (C⁴D) using a homemade capillary electrophoretic system. The optimized conditions for the separation of the pharmaceuticals by CZE were as follows: 50 mmol L^− 1 phosphate buffer (pH 5.0) in 50/50 (v/v) mixture of water/acetonitrile as the working electrolyte, 15 kV separation voltage, 25 °C separation temperature, hydrodynamic injection by gravity using 20 cm injection height and 60 s injection time. The detection by C⁴D was carried out by using a homemade detector, which employs a sinusoidal wave generator operating at 600 kHz frequency and 2 V_pp wave amplitude. The optimized and validated CZE-C⁴D method was applied for the determination of the studied pharmaceuticals as adulterants in phytotherapeutic formulations commercialized in Brazil for slimming purposes.     

Internal standard in flow injection analysis with amperometric detection

In this work, we describe for the first time the use of the internal standard method in flow injection analysis (FIA) with amperometric detection. The method is based on the application of sequential potential pulses to the working electrode in an electrochemical flow cell. The sequence of potential pulses is selected in such a way that the analyte and internal standard compound are detected and monitored individually and independently at the same working electrode. This approach compensates for random errors associated with variations of flow rate, injection volume, ionic strength difference between standards and samples, and accidental insertion or formation of air bubbles in the carrier stream. In addition, this method can overcome the major drawback of amperometric detection using solid electrodes, which is gradual electrode passivation. To illustrate the potential of this method, the flow-injection amperometric detection of uric acid using [Fe(CN)₆]^3? as an internal standard (IS) is presented as an example.     

Rapid Multiphase Flow Dynamics Mapped by Single‐Shot MRI Velocimetry

A new, fast magnetic resonance imaging (MRI) method is described and applied to map flow fields in systems with internal velocities rapidly varying along the streamlines. While conventional MRI techniques encode the velocity information in a preparatory period prior to the imaging acquisition module, our technique repeatedly refreshes the velocity encoding during a single‐shot imaging sequence. In this way, the maximum acceleration responsible for velocity variation of the molecules is increased by up to two orders of magnitude compared to standard procedures. Besides being compatible with high acceleration, this pulse sequence is suited to acquiring in a single scan the multiple velocity images required to construct a full velocity vector map. The power of this new methodology is demonstrated by following the internal dynamics of toluene droplets levitating in a counterflow of water during mass transfer of acetone from the water phase into the drop in the presence of surface‐active impurities. The dramatic reduction in measurement time allows visualization for the first time of the important impact of even small concentrations of acetone on accumulation of surfactants at the drop’s surface.     

Structural characterization of lignins isolated from Caragana sinica using FT-IR and NMR spectroscopy

In order to efficiently explore and use woody biomass,six lignin fractions were isolated from dewaxed Caragana sinica via successive extraction with organic solvents and alkaline solutions.The lignin structures were characterized by Fourier transform infrared spectroscopy(FT-IR) and 1D and 2D Nuclear Magnetic Resonance(NMR).FT-IR spectra revealed that the core of the lignin structure did not significantly change during the treatment under the conditions given.The results of 1H and 13C NMR demonstrated that ...     

Electrochemical synthesis of ammonia based on doped-ceria-carbonate composite electrolyte and perovskite cathode

Electrochemical synthesis of ammonia was investigated using a cobalt-free La_0.6Sr_0.4Fe_0.8Cu_0.2O_3-δ-Ce_0.8Sm_0.2O_2-δ (LSFCu-SDC) composite cathode and SDC-ternary carbonate composite electrolyte. La_0.6Sr_0.4Fe_0.8Cu_0.2O_3-δ and Ce_0.8Sm_0.2O_2-δ were prepared via combined EDTA-citrate complexing sol-gel and glycine nitrate processes, respectively, and characterised by X-ray diffraction (XRD). Ammonia was successfully synthesised from wet hydrogen and dry nitrogen under atmospheric pressure using Ni-SDC, SDC-carbonate and LSFCu-SDC composites as anode, electrolyte and cathode respectively. Ammonia formation was observed at 400, 425, 450 and 475 °C and the maximum rate of ammonia production was found to be 5.39 × 10⁻⁹ mol s⁻¹ cm⁻² at 450 °C and 0.8 V. The AC impedance measurements were recorded before and after the ammonia synthesis in the range of temperature 400-475 °C. The formation of ammonia at the N₂ side together with stable current at 450 °C under constant voltage demonstrates that SDC-(Li/Na/K)₂CO₃ composite electrolyte exhibits significant proton conduction at a temperature around 450 °C.     

Reactivity of p-phenyl substituted β-Enamino compounds using K-10/ultrasound. II. Synthesis of isoxazoles and 5-Isoxazolones

The condensation of 4-phenyl substituted β-enamino ketones 1a-d and β-enamino esters 5a-d with hydroxylamine hydrochloride using K-10 as the solid support under sonication was studied to evaluate the formation of isoxazole and 5-isoxazolone rings from β-enamino compounds with a substituted aromatic ring. Isoxazoles 2a-c, 3c-d and 5-isoxazolones 6a-c and 7a-d were obtained. The use of K-10/ultrasound in this reaction furnished novel results in some cases.     

Towards peptide-substituted titanocene anticancer drugs

An alkyne-substituted fulvene was transformed via hydridolithiation followed by transmetallation with titanium tetrachloride into bis-[p-(prop-2-ynyloxy)-benzyl-cyclopentadienyl] titanium(IV) dichloride. Single crystals of this titanocene derivative could be obtained and the structure determined by X-ray diffraction. It showed that this compound crystallises in the space group C2/c with four molecules in the monoclinic cell. The alkyne-substituted titanocene dichloride derivative was then subject to a copper-catalysed azide-alkyne cycloaddition with its azide-functionalised methylester-protected phenylalanine reaction partner in order to form a linking triazole. This reaction was performed under anhydrous conditions employing a dichloromethane/acetonitrile solvent mixture with copper(I) iodide and 2,6-lutidine as the catalyst system. Under these conditions the adduct between the protein mimic and the titanocene was formed without hydrolysing the titanium dichloride moiety.     

Untersuchung von Fetten und ?len

Ohne Zusammenfassung