Tuning electronic eigenvalues of benzene via doping

Using variable atomic numbers within molecular grand-canonical ensemble theory, the highest occupied Kohn-Sham eigenvalue of isoelectronic benzene derivatives is tuned. The performed transmutational changes correspond to the iterative doping with boron and nitrogen. The molecular Fukui function proves to be a reliable index in order to predict the changes in the highest occupied molecular orbital eigenvalue due to doping.     

Assessment of the efficiency of long-range corrected functionals for some properties of large compounds

Using the long-range correction (LC) density functional theory (DFT) scheme introduced by Iikura et al. [J. Chem. Phys. 115, 3540 (2001)] and the Coulomb-attenuating model (CAM-B3LYP) of Yanai et al. [Chem. Phys. Lett. 393, 51 (2004)], we have calculated a series of properties that are known to be poorly reproduced by standard functionals: Bond length alternation of pi-conjugated polymers, polarizabilities of delocalized chains, and electronic spectra of extended dyes. For each of these properties, we present cases in which traditional hybrid functionals do provide accurate results and cases in which they fail to reproduce the correct trends. The quality of the results is assessed with regard to experimental values and/or data arising from electron-correlated wave function approaches. It turns out that (i) both LC-DFT and CAM-B3LYP provide an accurate bond length alternation for polyacetylene and polymethineimine, although for the latter they decrease slightly too rapidly with chain length. (ii) The LC generalized gradient approximation and MP2 polarizabilities of long polyphosphazene and polymethineimine oligomers agree almost perfectly. In the same way, CAM-B3LYP corrects the major part of the B3LYP faults. (iii) LC and CAM techniques do not help in correcting the nonrealistic evolution with chain length of the absorption wavelengths of cyanine derivatives. In addition, though both schemes significantly overestimate the ground to excited state transition energy of substituted anthraquinone dyes, they provide a more consistent picture once a statistical treatment is performed than do traditional hybrid functionals.     

Radical Cyclisation of α‐Halo Aluminium Acetals: A Mechanistic Study

α‐Bromo aluminium acetals are suitable substrates for Ueno–Stork‐like radical cyclisations affording γ‐lactols and acid‐sensitive methylene‐γ‐lactols in high yields. The mechanistic study herein sets the scope and limitation of this reaction. The influence of the halide (or chalcogenide) atom X (X=Cl, Br, I, SPh, SePh) in the precursors α‐haloesters, as well as influence of the solvent and temperature was studied. The structure of the aluminium acetal intermediates resulting from the reduction of the corresponding α‐haloesters has been investigated by low‐temperature ¹³C‐INEPT diffusion‐ordered NMR spectroscopy (DOSY) experiments and quantum calculations, providing new insights into the structures of these thermally labile intermediates. Oxygen‐bridged dimeric structures with a planar Al₂O₂ ring are proposed for the least hindered aluminium acetals, while monomeric structures seem to prevail for the most hindered species. A comparison against the radical cyclisation of aluminium acetals derived from allyl and propargyl alcohols with the parent Ueno–Stork has been made at the BHandHLYP/6‐311++G(d,p) level of theory, highlighting mechanistic similarities and differences.     

Concurrent Covalent and Supramolecular Polymerization

Covalent and supramolecular polymerizations, both of which offer their own unique advantages, have emerged as popular strategies for making artificial materials. Herein, we describe a concurrent covalent and supramolecular polymerization strategy—namely, one which utilizes 1) a bis‐azide‐functionalized diazaperopyrenium dication that undergoes polymeriation covalently with a bis‐alkyne‐functionalized biphenyl derivative in one dimension as a result of a rapid and efficient β‐cyclodextrin(CD)‐accelerated, cucurbit[6]uril(CB)‐templated azide–alkyne cycloaddition, while 2) the aromatic core of the dication is able to dimerize in a criss‐cross fashion by dint of π–π interactions, enabling simultaneous supramolecular assembly, resulting in an extended polymer network in an orthogonal dimension.     

Modulation of the Physicochemical Properties of Donor–Spiro–Acceptor Derivatives through Donor Unit Planarisation: Phenylacridine versus Indoloacridine—New Hosts for Green and Blue Phosphorescent Organic Light‐Emitting Diodes (PhOLEDs)

This work reports a detailed structure–property relationship study of a series of efficient host materials based on the donor–spiro–acceptor (D‐spiro‐A) design for green and sky‐blue phosphorescent organic light‐emitting diodes (PhOLEDs). The electronic and physical effects of the indoloacridine (IA) fragment connected through a spiro bridge to different acceptor units, namely, fluorene, dioxothioxanthene or diazafluorene moiety, have been investigated in depth. The resulting host materials have been easily synthesised through short, efficient, low‐cost, and highly adaptable synthetic routes by using common intermediates. The dyes possess a very high triplet energy (E_T) and tuneable HOMO/LUMO levels, depending on the strength of the donor/acceptor combination. The peculiar electrochemical and optical properties of the IA moiety have been investigated though a fine comparison with their phenylacridine counterparts to study the influence of planarisation. Finally, these molecules have been incorporated as hosts in green and sky‐blue PhOLEDs. For the derivative SIA‐TXO₂ as a host, external quantum efficiencies as high as 23 and 14 % have been obtained for green and sky‐blue PhOLEDs, respectively.     

Synthesis and coating of cobalt ferrite nanoparticles: a first step toward the obtainment of new magnetic nanocarriers

Monodisperse and stable cobalt ferrite (CoFe2O4) nanoparticles (5.4 nm) have been produced, coated with mono- and difunctional phosphonic and hydroxamic acids, and fully characterized (using thermogravimetric analysis (TGA), dynamic light scattering (DLS), IR spectroscopy, transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) measurements). Cobalt leakage of the coated nanoparticles has been also studied. Magnetic measurements show the possible applications in hyperthermia at low frequencies, and for this reason, water-soluble coated CoFe2O4 can be seen as a first step toward the obtainment of novel systems for biomagnetic applications.     

Laparoscopic photodynamic diagnosis of ovarian cancer peritoneal micro metastasis: an experimental study

The goal of this study was to assess the interest of photodynamic diagnosis (PDD) for laparoscopic detection of peritoneal micro metastasis in ovarian carcinoma. Using an experimental animal model, intraperitoneal injection of aminolevulinic acid (ALA) and hexylester of aminolevulinic acid (He-ALA) were compared in order to improve laparoscopic detection of ovarian peritoneal carcinomatosis. Twenty-one 344 Fischer female rats received an intra peritoneal injection of 106 NuTu-19 cells. At day 22, carcinomatosis with micro peritoneal metastasis was obtained. Rats were randomized in three groups concerning intra peritoneal injection before laparoscopic staging: 5-ALA hydrochloride, HE-ALA and sterile water. Using D Light system, laparoscopic peritoneal exploration was performed with white light (WL) first and then with blue light (BL). The main objective was to assess feasibility and sensibility of laparoscopic PDD for nonvisible peritoneal micro metastasis of ovarian cancer. The main parameter was the confirmation of neoplasic status of fluorescent foci by histology. Concerning PDD after intraperitoneal injection of 5-ALA, mean values of lesions seen is higher than without fluorescence (32 vs 20.7; P = 0.01). Using He-ALA, mean values of detected lesions is higher than without fluorescence (42.9 vs 33.6; P < 0.001). Neoplasic status of fluorescent foci was confirmed in 92.8% of cases (39/42). Using 5-ALA, fluorescence of cancerous tissue is significantly higher than that of normal tissue in all the rats (ratio 1.17) (P = 0.01). With He-ALA, intensity of fluorescence is significantly higher in cancerous tissue compared to normal tissue, irrespective of the rat studied (ratio 1.22; P < 0.001).     

Assay of glutathione in must and wines using capillary electrophoresis and laser-induced fluorescence detection. Changes in concentration in dry white wines during alcoholic fermentation and aging

Glutathione (GSH) was assayed in must and wine using capillary electrophoresis coupled with laser-induced fluorescence (LIF) detection. Sample preparation involved conjugating thiols with monobromobimane (MBB) in a 2-(N-cyclohexylamino)ethanesulfonic acid [CHES] buffer (179mM). The electrophoretic conditions were 30kV with a capillary length of 105cm from the inlet to the detector (120cm total length) and a 50microm inner diameter. Under these conditions, the complete separation from the other main non-volatile thiols took less than 20min. We also described the optimum conditions for derivatizing wine samples with MBB to increase eletrophoretic sensitivity. The detection limit for glutathione assay is 65nmol/L. This simple, sensitive method provides a specific assay of glutathione in reduced form, as the sample preparation technique does not modify the balance of oxidized and reduced forms. We used this method to monitor changes in the reduced glutathione content of a white wine during alcoholic fermentation and barrel aging.     

Assessment of the Fe-Sn-Zn phase diagram at 450°C

The Fe-Sn-Zn system is of interest because Sn is one element added to the Zn galvanizing bath to overcome the drawbacks due to the presence of Si in semi-killed steels. This work has been undertaken with the aim to understand the tin effect on the microstructure and the layers growth in batch galvanized coatings on low alloyed steels. Various experimental techniques such as metallography, scanning electron microscopy (SEM) coupled with X-ray energy dispersive spectroscopy (EDX) are used in order to characterize the microstructure and the properties of such coatings elaborated in a zinc bath enriched with tin. Solidification phenomena and layers growth mechanisms during galvanization are explained by means of the ternary phase diagram Fe-Sn-Zn at 450°C. The Calphad method allows to obtain this phase diagram from the three optimized binary phase diagrams Fe-Sn, Fe-Zn and Sn-Zn and some experimental data inside the ternary Fe-Sn-Zn system.