用L-脯氨酸衍生物作为手性流动相添加剂拆分对映异构体

用自制的N-十二酰基-L-脯氨酸和N-十二酰基-L-脯氨酸-3，5-二甲基苯胺两种L-脯氨酸衍生物作手性流动相添加剂，在氨丙基硅烷化硅胶柱上，用正己烷／异丙醇作流动相，对多种手性化合物进行了高效液相色谱拆分。实验结果表明：用N-十二酰基-L-脯氨酸作添加剂拆分的12种手性化合物，有8种手性化合物能得到拆分，具有较好的手性选择性。虽然用N-十二酰基-L-脯氨酸-3，5-二甲基苯胺作添加剂，手性选择性也较好，但由于含有苯环，紫外吸收增强，基线波动严重。     

Characterization of amiodarone metabolites and impurities using liquid chromatography/atmospheric pressure chemical ionization mass spectrometry

Using the high performance liquid chromatography/atmospheric pressure chemical ionization tandem mass spectrometry (HPLC/APCI-MS/MS) technique, together with established trends from the literature, the structures of metabolites and impurities of amiodarone, an anti-arrhythmic drug, have been assigned. By comparing analyses of products of incubation with rat liver microsomes with controls in which glucose 6-phosphate dehydrogenase was omitted, metabolites could be distinguished from impurities. Structures for the two proposed metabolites and four impurities are proposed.     

Adsorption of Carbon Dioxide on Activated Carbon

The adsorption of CO2 on a raw activated carbon A and three modified activated carbon samples B, C, and D at temperatures ranging from 303 to 333 K and the thermodynamics of adsorption have been investigated using a vacuum adsorption apparatus in order to obtain more information about the effect of CO2 on removal of organic sulfur-containing compounds in industrial gases. The active ingredients impregnated in the carbon samples show significant influence on the adsorption for CO2 and its volumes adsorbed on modified carbon samples B, C, and D are all larger than that on the raw carbon sample A. On the other hand, the physical parameters such as surface area, pore volume, and micropore volume of carbon samples show no influence on the adsorbed amount of CO2. The Dubinin-Radushkevich (D-R) equation was the best model for fitting the adsorption data on carbon samples A and B, while the Preundlich equation was the best fit for the adsorption on carbon samples C and D. The isosteric heats of adsorption on carbon samples A, B, C, and D derived from the adsorption isotherms using the Clapeyron equation decreased slightly increasing surface loading. The heat of adsorption lay between 10.5 and 28.4 kJ/mol, with the carbon sample D having the highest value at all surface coverages that were studied. The observed entropy change associated with the adsorption for the carbon samples A, B, and C (above the surface coverage of 7 ml/g) was lower than the theoretical value for mobile adsorption. However, it was higher than the theoretical value for mobile adsorption but lower than the theoretical value for localized adsorption for carbon sample D.     

A Systematic Evaluation of Polyurethane as a Conformal Coating for the Inhibition of Corrosion on Electronic Components

The corrosion of printed circuit boards can be effectively prevented with a polyurethane conformal coating. In this study, the protective performance of PU coating was investigated systematically through electrochemical measurements and simulated exposure/immersion tests. Some fungi tests were also included. All experimental results show that a polyurethane coating effectively inhibits corrosion on printed circuit boards. The optimal thickness of the coating film should be about 60 μm. Long-term exposure tests showed that this coating material could preserve the reliability of the investigated printed circuit boards for more than 400 days in a 90% relative humidity environment at 25°C.     

Group 4 ansa-metallocenes derived from o-carborane and their luminescent properties

Luminescent group 4 complexes derived from o-carborane, M(η⁵:η¹-CpCMe₂CB₁₀H₁₀C)₂ (M = Ti; 1, Zr; 2, Hf; 3) and Me₂Si(η⁵-Ind)[η⁵:η¹-Cp-3-(CMe₂CB₁₀H₁₀C)]ZrCl (4) were explored. While the Ti complex 1 possessing C₂ molecular symmetry shows non-centrosymmetry in the unit cell as identically observed in 2 and 3, the double-ansa Zr complex 4 crystallizes in centrosymmetric P2₁/n space group despite its C₁ molecular symmetry. The non-centrosymmetric crystals of 2 and 3 exhibit blue mechanoluminescence similar to their solution and solid state photoluminescence. In contrast, 1 is lacking mechanoluminescence in crystal and shows much weaker emission than other congeners in solution. The electroluminescence devices based on 2 or 3 doped poly(N-vinylcarbazole) (PVK) as an emitting layer display green electroluminescence, which turned out to be originated from the exciplexes formed between the complex and PVK host. Although the double ansa-Zr complex 4 does not show mechanoluminescence owing to the centrosymmetric nature, it exhibits good electron-transporting properties when incorporated into the electron-transporting layer of Alq₃-based OLEDs.     

High performance Zn–Sn–O thin film transistors with Cu source/drain electrode

Zn–Sn–O (ZTO) thin film transistors (TFTs) were fabricated with a Cu source/drain electrode. Although a reasonably high mobility (μ_FE) of 13.2 cm²/Vs was obtained for the ZTO TFTs, the subthreshold gate swing (SS) and threshold voltage (V_th) of 1.1 V/decade and 9.1 V, respectively, were inferior. However, ZTO TFTs with Ta film inserted as a diffusion barrier, exhibited improved SS and V_th values of 0.48 V/decade and 3.0 V, respectively as well as a high μ_FE value of 18.7 cm²/Vs. The improvement in the Ta‐inserted device was attributed to the suppression of Cu lateral diffusion into the ZTO channel region. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Determination of Lipoic Acid in Biological Samples with Acetonitrile–Salt Stacking Method in CE

An acetonitrile–salt stacking method was established for the assay of lipoic acid (LA) in biological samples. Samples were deproteinized with acetonitrile at a final concentration of 60 % (v/v) and then injected hydrodynamically at 3.45 × 10³ Pa for 180.0 s. The optimum background electrolyte was found to be 90.0 mmol L^?1 pH 9.1 borate buffer. LA could be detected within 35 min at +7.0 kV with satisfactory repeatability (relative standard deviations, RSDs, of migration times and peak areas were both below 10 % for intraday and interday; n = 6/9) and a relatively low limit of detection of ca. 0.5 μmol L^?1.     

Polarographic Studies of Dithiodiacetic Acid and the Uranyl-Dithiodiacetic Acid Complex

The polarographic behaviour of dithiodiacetic acid and that of U(VI) in a solution containing dithiodiacetic acid as complexing agent have been investigated. For the dithiodiacetic acid system, two waves appear over the pH range studied. The prewave is kinetic in nature and the mainwave is diffusion-controlled. However, as U(VI) is added into the dithiodiacetic acid system, the polarogram changes due to the existence of a complex. The current-potential curve of the first wave is not the normal S shape. This is due to the superposition of the first wave of the ligand and the wave due to the reduction of the U(VI) in the complex to U(V). The second wave is due to the reduction of the complex The first wave is an adsorption-controlled current and the second wave is partly diffusion-controlled and partly adsorption-controlled. We propose an electrode reaction mechanism for both systems and the complex species. The dissociation constant of the complex HASSAUO⁺₂ is found to be of the order of 10^?4.     

Adsorption configurations and energetics of BClx (x=0-3) on TiO2 anatase (101) and rutile (110) surfaces

This study investigates the adsorption and reactions of boron trichloride and its fragments (BClx) on the TiO2 anatase (101) and rutile (110) surfaces by first-principles calculations. The results show that the possible absorbates on the TiO2 anatase and rutile surfaces are very similar. The single- and double-site adsorption configurations are found for both anatase and rutile surfaces. The particular adsorbate feature on the anatase surface is its in-plane double-site adsorption by Ti and O from its sawtooth surface. The potential energy surface shows that BCl3 can be adsorbed on the O site for both the anantase and rutile surfaces and the most of the BClx reaction on both anatase and rutile surfaces are endothermic, except for the dissociative reaction on the rutile surface. The energy levels of the BClx reactions between the anatase and rutile surfaces show that the rutile surface has lower energy levels than those of anatase surface. This result reveals that the BClx dissociative adsorption more easily occurs on rutile surface than on anatase surface.     

Diffusiophoresis in suspensions of highly charged soft particles

Diffusiophoresis phenomenon of aoft particles suspended in binary electrolyte solutions is explored theoretically in this study based on the spherical cell model, focusing on the chemiphoresis component in absence of diffusion potential. Both the electrostatic and hydrodynamic aspects of the boundary confinement, or steric effect, due to the presence of neighboring particles are examined extensively under various electrokinetic conditions. Significant local extrema are found in mobility profiles expressed as functions of the Debye length in general, synchronized with the strength of the motion-inducing double layer polarization. Moreover, a seemingly peculiar phenomenon is observed that the soft particles may move faster in more concentrated suspensions. The competition between the simultaneous enhancement of the motion-inducing electric driving force and the motion-retarding hydrodynamic drag force from the boundary confinement effect of the neighboring particles is found to be responsible for it. The above findings are also demonstrated experimentally in a very recent study on the diffusiophoretic motion of soft particles through porous collagen hydrogels. The results presented here are useful in various practical applications of soft particles like drug delivery.