A unified and quantitative receptor model for the microtubule binding of paclitaxel and epothilone

[formula: see text] Paclitaxel and epothilone represent the two major classes of antimicrotubule agents that promote tubulin polymerization and, presumably, mitotic arrest during cell division. A common minireceptor binding site model at beta-tubulin has been constructed for these structurally divergent compounds. Utilizing 20 amino acids identified in photoaffinity labeling experiments, the 3-D model correlates measured and predicted Ki's with r = 0.99 and rms(delta Gcalc-delta Gexp) = 0.2 kcal/mol. In addition, the model predicts the affinity of compounds not used in the training set and explains much of the SAR for the paclitaxel and epothilone families.     

烯烃氢甲酰化催化剂活性物种的原位1H NMR研究

The rhodium-phosphine complex catalyst Rh(CO)(acac)(PPh3)(Ⅰ) for 1-hexene hydroformylation was studied under the following reaction conditions: CO/H2=1(mole rate), pressure 1.0 MPa, temperature 25-120℃, by using the pressurized in-situ 1H NMR technique. Experimental results indicated that the formation of a rhodium hydride complex from (Ⅰ) began at room temperature and its amount increased with increasing of reaction temperature. This intermediate complex began to decompose at 100℃ and disapeared completely at 120℃. The intensity change of the proton signal was parallel to catalytical activity in hydroformylation of olefins. Under pure CO pressure the proton signal of Ph-H bond was not observed. There was a 0.2 ppm difference in proton chemical shifts of Rh-H bond under pure H2 pressure and under H2+CO pressure. The results showed that the rhodium-hydride carbonyl complex is the active intermediate in the industrial hydroformylation process.     

Indirect Determination of Captopril with Sodium Nitrate and Thiocyanate by Floatation Separation of Copper

A new method for indirect determination of captopril (CPT) with NaNO₃ and NH₄SCN by floatation and separation of copper has been studied. In the weak acid, a small amount of Cu(II) can be reduced to Cu(I) by CPT, then Cu(I) reacted with the SCN, which can float on the surface of the liquid phase with NaNO₃. A good linear relationship is observed between the floatation yield (E%) of Cu(II) and the amount of captopril. The linear range is 2?32 mg/L. On the ground, captopril can be indirectly determined by determining E(%) of Cu(II). The method is simple, rapid, reliable and has good selectivity. The developed method can be applied to indirect determination of captopril with satisfactory results.     

EQCM技术对电子传递促进机制的研究

本文报道了腺嘌呤存在时对超氧化物歧化酶在金丝电极上电化学行为的影响。并从电化学石英晶体微天平技术的测量结果，初步讨论了腺嘌呤对促进超氧化物歧化酶电子传递过程的作用机制。     

Polymer bound glutamic acid salicylaldehyde Schiff‐base complex ­catalyst for oxidation of olefins with ­dioxygen

The polymer bound Schiff‐base ligand (PS‐SalGlu) has been prepared from polystyrene bound salicylaldehyde and glutamic acid, and its complex (PS‐SalGlu‐Co) has also been synthesized. The polymer ligand and its complex were characterized by infrared spectroscopy, small area X‐ray photoelectron spectroscopy, and inductively coupled plasma‐atomic emission spectro (ICP‐AFS). In the presence of the complex, cyclohexene can be effectively oxidized by molecular oxygen without reductant. The long‐chain linear aliphatic olefins, such as 1‐octene, 1‐decene, 1‐dodecene and 1‐tetradecene, can be directly oxidized by molecular oxygen catalyzed by PS‐SalGlu‐Co, which affords the 1,2‐epoxy alkane. Copyright © 2001 John Wiley & Sons, Ltd.     

Volumetric Properties for the Electrolyte (NaCl,NaBr and NaI) Monosaccharide (D‐Mannose and D‐Ribose)‐Water Systems at 298.15 K

Densities have been measured for the electrolyte (NaCl, NaBr and NaI)‐monosaccharide (D ‐mannose and D‐ribose)‐water solutions at 298.15 K. These data have been used to calculate the apparent molar volumes of the saccharides (V_Φ,S) and electrolytes (V_Φ,E) in the studied solutions. Infinite dilution apparent molar volumes, V_Φ,S⁰ and V_Φ,E⁰, have been evaluated, together with the standard transfer volumes of the saccharides (Δ_tV_S⁰) from water to aqueous electrolyte solutions and those of the electrolytes (Δ_tV_E⁰) from water to aqueous saccharide solutions. It was shown that both the Δ_tV_S⁰ and Δ_tV_E⁰ values are positive and increase with increasing molalities of sodium halides and saccharides, respectively. Overall, the Δ_tV_S⁰ and Δ_tV_E⁰ values have the order of NaCl > NaBr > NaI except for NaI‐ribose and NaI‐ribose. Volumetric interaction parameters for the electrolyte‐monosaccharide pairs in water were obtained and interpreted by the stereochemistry of the monosaccharide molecules and the structural interaction model.     

亲电性对醌二甲烷与富电子烯烃的电荷转移聚合

概述了亲电性对醌二甲烷与富电子烯烃电荷转移聚合的最新进展，着重介绍聚合的一般特征、引发机理、链增长机理，以及单体结构、溶剂对聚合反应的影响。     

Over 18% binary organic solar cells enabled by isomerization of non-fullerene acceptors with alkylthiophene side chains

Side-chain engineering has been demonstrated as an effective method for fine-tuning the optical, electrical, and morphological properties of organic semiconductors toward efficient organic solar cells (OSCs). In this work, three isomeric non-fullerene small molecule acceptors (SMAs), named BTP-4F-T2C8, BTP-4F-T2EH and BTP-4F-T3EH, with linear and branched alkyl chains substituted on the α or β positions of thiophene as the side chains, were synthesized and systematically investigated. The results demonstrate that the size and substitution position of alkyl side chains can greatly affect the electronic properties, molecular packing as well as crystallinity of the SMAs. After blending with donor polymer D18-Cl, the prominent device performance of 18.25% was achieved by the BTP-4F-T3EH-based solar cells, which is higher than those of the BTP-4F-T2EH-based (17.41%) and BTP-4F-T2C8-based (15.92%) ones. The enhanced performance of the BTP-4F-T3EH-based devices is attributed to its stronger crystallinity, higher electron mobility, suppressed biomolecular recombination, and the appropriate intermolecular interaction with the donor polymer. This work reveals that the side chain isomerization strategy can be a practical way in tuning the molecular packing and blend morphology for improving the performance of organic solar cells.

     

用裂解气相色谱法对几株霉菌的分析

本文用带有PYR-2A管式炉裂解器和C-R2AX计算机的岛津GC-9A气相色谱仪,对3株曲霉和3株青霉进行了裂解气相色谱鉴别。通过对指纹图的分析,能够较好地区分出两属之间和各菌株之间的差异,证明了裂解气相色谱分析法用于霉菌鉴别的可能性。     

A first synthesis of thiophene dendrimers

[structure: see text] Thiophene dendrons and dendrimers were designed and synthesized using a convergent approach. Metal-mediated coupling reactions were used in the synthesis. A rational approach allowed the formation of alphaalpha, betabeta, and alphabeta linkages between the dendrons and thiophene units.