Water Clusters: Through Which Water Capsules Were Connected to Form Supramolecular Chains

A crystal structure of {H₂O@CB[5]·(NH₄PF₆)₂}·9(H₂O) which consists of supramolecular chains self-assembled by water clusters and water capsules alternately was demonstrated. A water molecule is encapsulated in the cavity of CB[5] whose portals are occupied by two NH₄ ⁺, resulting in the formation of water capsule. The water clusters are made up of (H₂O)₄ and (H₂O)₅ clusters. The (H₂O)₄ cluster forms zigzag line and (H₂O)₅ features “Y-shape” structure. Moreover, anion channels consisting of six parallel supramolecular chains are occupied by PF₆ ^?.     

The non-covalent bindings of CF2Cl2 with NO and SO2

Ab initio calculations have been performed on the complexes of CF₂Cl₂ with NO and SO₂, and a set of stable configurations for CF₂Cl₂–NO and CF₂Cl₂–SO₂ were found with no imaginary frequencies by the MP2 method. In addition, the binding energy and the NBO analysis were used to evaluate the relative stability of the complexes. The calculated results indicate that the weak interactions in the CF₂Cl₂–NO and CF₂Cl₂–SO₂ systems involved are enhanced with the increase of the number of non-covalent bonds. Further studies predict that the CF₂Cl₂–SO₂ system may play a more important role than the CF₂Cl₂–NO system in environmental problem because the former offers a stronger interaction than the latter. Furthermore, the non-covalent binding interactions of Cl···N and Cl···O for CF₂Cl₂–NO system, Cl···O, Cl···S and F···S for CF₂Cl₂–SO₂ system, are the dominant forces, which seem to be very significant as a driving force influencing the arrangement of molecules, especially in CF₂Cl₂–SO₂ system.     

Tuning of Ti-doped mesoporous silica for highly efficient enrichment of phosphopeptides in human placenta mitochondria

Extraction of phosphopeptides from rather complex biological samples has been a tough issue for deep and comprehensive investigation into phosphoproteomes. In this paper, we present a series of Ti-doped mesoporous silica (Ti-MPS) materials with tunable composition and controllable morphology for highly efficient enrichment of phosphopeptides. By altering the molar ratio of silicon to titanium (Si/Ti) in the precursor, the external morphology, Ti content, internal long-rang order, and surface area of Ti-MPS were all modulated accordingly with certain regularity. Tryptic digests of standard phosphoprotein α- and β-casein were employed to assess the phosphopeptide enrichment capability of Ti-MPS series. At the Si/Ti molar ratio of 8:1, the optimum enrichment performance with admirable sensitivity and capacity was achieved. The detection limit for β-casein could reach 10 fmol, and 15 phosphopeptides from the digest of α-casein were resolved in the spectrum after enrichment, both superior to the behavior of commercial TiO₂ materials. More significantly, for the digest of human placenta mitochondria, 396 phosphopeptides and 298 phosphoproteins were definitely detected and identified after enrichment with optimized Ti-MPS material, demonstrating its remarkable applicability for untouched phosphoproteomes. In addition, this research also opened up a universal pathway to construct a composition-tunable functional material in pursuit of the maximum performance in applications.

Accelerated solvent extraction and pH‐zone‐refining counter‐current chromatographic purification of yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom

This study aimed to seek an efficient method to extract and purify yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom. by accelerated solvent extraction combined with pH‐zone‐refining counter‐current chromatography. The major extraction parameters for accelerated solvent extraction were optimized by an orthogonal test design L₉ (3)⁴. Then a separation and purification method was established using pH‐zone‐refining counter‐current chromatography with a two‐phase solvent system composed of petroleum ether/ethyl acetate/methanol/water (5:5:2:8, v/v) with 10 mM triethylamine in the upper phase and 10 mM HCl in the lower phase. From 2 g crude extract, 224 mg of 8‐deacetylyunaconitine (I) and 841 mg of yunaconitine (II) were obtained with a purity of over 98.0%. The chemical structures were identified by ESI‐MS and ¹H and ¹³C NMR spectroscopy.     

Highly porous magnetite/graphene nanocomposites for a solid-state electrochemiluminescence sensor on paper-based chips

Graphene-nanosheet-based highly porous magnetite nanocomposites (GN-HPMNs) have been prepared using a simple solvothermal method and used as an immobilization matrix for the fabrication of a solid-state electrochemiluminescence (ECL) sensor on paper-based chips. Highly porous Fe₃O₄ nanocrystal clusters were coated with acrylate and wrapped tightly on the skeleton of graphene nanosheets. The structures and sizes of the GN-HPMNs could be tuned by varying the proportions of the solvents ethylene glycol and diethylene glycol. Then, the relatively highly porous ones with an average diameter of about 65 nm were combined with Nafion to form composite films on an electrode surface for immobilization of Ru(bpy)₃ ²⁺ (bpy is 2,2′-bipyridine). Because of their porosity, negatively charged surface, and cooperative characteristics of magnetic nanomaterials and graphene, under an external magnetic field, the GN-HPMNs ensured effective immobilization, excellent electron transfer, and long-term stability of Ru(bpy)₃ ²⁺ in the composite film. The sensor developed exhibited excellent reproducibility with a relative standard deviation of 0.65 % for 30 continuous cycles. It was found to be much more favorable for detecting compounds containing tertiary amino groups and DNAs with guanine and adenine. A detection limit (signal-to-noise ratio of 3) of 5.0 nM was obtained for tripropylamine. As an application example, 0.5 nM single-nucleotide mismatch could be detected. This was the first attempt to introduce magnetic nanomaterials and an external magnetic field into paper-based chips. The sensor developed has the advantages of high sensitivity, good stability, and wide potential applicability as well as simplicity, low cost, and good disposability.

Simultaneous quantification of 11 isoquinoline alkaloids in Corydalis impatiens (Pall.) Fisch by HPLC

Isoquinoline alkaloids are the primary active ingredients of Corydalis, but an analytical method for quality assessment of the active ingredients in Corydalis impatiens (Pall). Fisch has not been reported. A new, simple, and multiple‐component quantification method was developed for the simultaneous quantification of 11 isoquinoline alkaloids including capnoidine, chelianthifoline, bicuculline, protopine, isoapocavidine, apocavidine, cavidine, tetrahydroepiberberine, ochotensimine, tetrahydrocoptisine, and tetrahydrocorysamine in C. impatiens. Separation of the isoquinoline alkaloids was performed on a RP C₁₈ column (150 × 4.6 mm, 5 μm) with potassium dihydrogen phosphate buffer (pH 2.5, adjusted by phosphoric acid)/acetonitrile (53:47, v/v) containing 0.3% sodium dodecyl sulfonate. The flow rate and detection wavelength were set at 1 mL/min and 295 nm, respectively. Full validation of the assay was carried out including linearity, precision, accuracy, stability, LOD, and limit of quantitation. All calibration curves showed a good linear relationship (r > 0.999) in test range. The results demonstrated that the developed method was reliable, rapid, and specific. Six batches of C. impatiens samples from different sources were determined using the established method. The contents of alkaloids ranged from 11.68 to 351.83 μg/g. This method can be applied for quality evaluation and control of C. impatiens. Eleven isoquinoline alkaloids were first reported on simultaneous determination with HPLC.     

An interesting two‐phase solvent system and its use in preparative isolation of aconitines from aconite roots by counter‐current chromatography

Two‐phase solvent system plays crucial role in successful separation of organic compounds using counter‐current chromatography (CCC). An interesting two‐phase solvent system, composed of chloroform/ethyl acetate/methanol/water, is reported here, in which both phases contain sufficient organic solvents to balance their dissolving capacities. Adjusting the solvent system to get satisfactory partition coefficients (K values) for target compounds becomes relatively simple. This solvent system succeeded in sample preparation of aconitine (8.07 mg, 93.69%), hypaconitine (7.74 mg, 93.17%), mesaconitine (1.95 mg, 94.52%) from raw aconite roots (102.24 mg, crude extract), benzoylmesaconine (34.79 mg, 98.67%) from processed aconite roots (400.01 mg, crude extract), and yunaconitine (253.59 mg, 98.65%) from a crude extract of Aconitum forrestii (326.69 mg, crude extract).     

Antimicrobial,anticancer and DNA binding studies of transition metal(II) complexes containing 2-phenyl-4-selenazole carboxylic acid

Science China Chemistry - Three novel transition metal complexes [ML2(phen)]·H2O (M= Mn, Co, Zn; HL= C10H7O2NSe, 2-phenyl-4-selenazole carboxylic acid, phen= 1,10-phenanthroline) 1～3...     

2,2′‐Anhydro‐1‐(3′,5′‐di‐O‐acetyl‐β‐D‐arabinofuranosyl)uracil,a cyclouridine nucleoside with a C4′‐endo furanosyl conformation

2,2′‐Anhydro‐1‐(3′,5′‐di‐O‐acetyl‐β‐D‐arabinofuranosyl)uracil, C₁₃H₁₄N₂O₇, was obtained by refluxing 2′,3′‐O‐(methoxymethylene)uridine in acetic anhydride. The structure exhibits a nearly perfect C4′‐endo (⁴E) conformation. The best four‐atom plane of the five‐membered furanose ring is O—C—C—C, involving the C atoms of the fused five‐membered oxazolidine ring, and the torsion angle is only −0.4 (2)°. The oxazolidine ring is essentially coplanar with the six‐membered uracil ring [r.m.s. deviation = 0.012 (5) Å and dihedral angle = −3.2 (3)°]. The conformation at the exocyclic C—C bond is gauche–trans which is stabilized by various C—H...π and C—O...π interactions.