Chitosan-Based Materials for the Removal of Nickel Ions from Aqueous Solutions

Russian Journal of Physical Chemistry A - Sorption of Ni(II) ions from liquid effluents utilizing chemically modified chitosan; (vanillin, polymer I) and (ortho-vanillin, polymer II) is studied...     

Multi-C−C/C−N-Coupled Light-Emitting Aliphatic Terpolymers: N−H-Functionalized Fluorophore Monomers and High-Performance Applications

To circumvent costly fluorescent labeling, five nonconventional, multifunctional, intrinsically fluorescent aliphatic terpolymers ( 1 – 5 ) have been synthesized by C−C/C−N-coupled, solution polymerization of two non-emissive monomers with protrusions of fluorophore monomers generated in situ. These scalable terpolymers were suitable for sensing and high-performance exclusion of Cu^II, logic function, and bioimaging. The structures of the terpolymers, in situ attachment of fluorescent monomers, aggregation-induced enhanced emission, bioimaging ability, and super adsorption were investigated by ¹H and ¹³C NMR, EPR, FTIR, X-ray photoelectron, UV/Vis, and atomic absorption spectroscopy, thermogravimetric analysis, high-resolution transmission electron microscopy, dynamic light scattering, solid-state fluorescence, fluorescence imaging, and fluorescence lifetime measurements, as well as by isotherm, kinetics, and thermodynamic studies. The geometries and electronic structures of the fluorophores and the absorption and emission properties of the terpolymers were examined by DFT, time-dependent DFT, and natural transition orbital analyses. For 1 , 2 , and 5 , the limits of detection were determined to be 1.03×10⁻⁷, 1.65×10⁻⁷, and 1.77×10⁻⁷ m , respectively, and the maximum adsorption capacities are 1575.21, 1433.70, and 1472.21 mg g⁻¹, respectively.     

Chemically characterised Pimenta dioica (L.) Merr. essential oil as a novel plant based antimicrobial against fungal and aflatoxin B1 contamination of stored maize and its possible mode of action

Abstract

The chemical characterisation of Pimenta dioica essential oil (PDEO) revealed the presence of 50 components, amongst which α-Terpineol (30.31%) was the major component followed by β-Linalool (6.75%) and γ-Terpinene (4.64%). The oil completely inhibited the growth of aflatoxin B₁ secreting strain Aspergillus flavus LHP-VS-8 and aflatoxin B₁ production at 2.5?µL/mL and 1.5?µL/mL, respectively. The oil caused dose dependent reduction of methylglyoxal (an AFB₁ inducer), enhanced leakage of Ca²⁺, Mg²⁺ and K⁺ ions and significantly reduced ergosterol content of fungal plasma membrane. During in situ experiments, PDEO exhibited complete protection of fumigated maize cob slices from fungal infestation without affecting seed germination. The chemically characterised PDEO is recommended as a plant based preservative and shelf life enhancer of food commodities by preventing fungal growth, AFB₁ production and lipid peroxidation. This is the first report on PDEO as inhibitor of AFB₁ secretion and methylglyoxal biosynthesis.     

Regulating Charge-Transfer in Conjugated Microporous Polymers for Photocatalytic Hydrogen Evolution

Bandgap engineering in donor–acceptor conjugated microporous polymers (CMPs) is a potential way to increase the solar-energy harvesting towards photochemical water splitting. Here, the design and synthesis of a series of donor–acceptor CMPs [tetraphenylethylene (TPE) and 9-fluorenone (F) as the donor and the acceptor, respectively], F_0.1CMP , F_0.5CMP , and F_2.0CMP , are reported. These CMPs exhibited tunable bandgaps and photocatalytic hydrogen evolution from water. The donor–acceptor CMPs exhibited also intramolecular charge-transfer (ICT) absorption in the visible region (λ_max=480 nm) and their bandgap was finely tuned from 2.8 to 2.1 eV by increasing the 9-fluorenone content. Interestingly, they also showed emissions in the 540–580 nm range assisted by the energy transfer from the other TPE segments (not involved in charge-transfer interactions), as evidenced from fluorescence lifetime decay analysis. By increasing the 9-fluorenone content the emission color of the polymer was also tuned from green to red. Photocatalytic activities of the donor–acceptor CMPs ( F_0.1CMP , F_0.5CMP , and F_2.0CMP ) are greatly enhanced compared to the 9-fluorenone free polymer ( F_0.0CMP ), which is essentially due to improved visible-light absorption and low bandgap of donor–acceptor CMPs. Among all the polymers F_0.5CMP with an optimum bandgap (2.3 eV) showed the highest H₂ evolution under visible-light irradiation. Moreover, all polymers showed excellent dispersibility in organic solvents and easy coated on the solid substrates.     

Dielectric,impedance and modulus spectroscopy of Ta-based layered perovskite

PbBi₂Ta₂O₉ ceramic samples were fabricated by high-temperature mixed oxide method. X-ray diffraction determines the structure as orthorhombic. The scanning electron microscopy confirms the formation of densely packed grains in the sample. The dielectric measurements, complex impedance and complex modulus study were carried out in a frequency range of 1?kHz–1?MHz and a temperature rangeof 25–500°C. The conduction mechanism of the material is discussed in details using variable range hoping, nearest neighbor hopping relaxation model and dc activation energy at two different temperature regimes. From the J-E characteristics studies, the occurrence of non-linear curves endorses the non-Ohmic nature of the material.     

Giant magnetostriction materials

One of the significant technical developments in magnetism of the early 1970's was the discovery of a new class of rare earth intermetallic compounds, the RFe₂ Laves phases, which were found to exhibit room temperature magnetostrictive strains approaching 2 × 10⁻³, an order of magnitude larger than any previously known. Since that time both the fundamental and technical properties of these materials have been of intense interest, and they remain the subject of active research even today. The large strains available are useful in such applications as production of high amplitude, low frequency sound waves in water, certain types of strain gages, vibration compensation and compensation for temperature induced strains in large laser mirrors. Because the performance of these materials depends critically on such fundamental properties as the magnetic anisotropy, magnetization and grain orientation of the material, there has been a very strong interplay between fundamental studies and applications. In this article we briefly review the fundamental magnetic and magnetostrictive properties of the RFe₂ Laves phases, focusing especially on the complex behavior of the anisotropy and the success of crystal field theory in explaining it. We also present neutron measurements of magnetic excitation spectra and explain how they provide an understanding of the remarkable success of mean field theory for these systems.     

Possibility of weakly charged nonlinear solitary dust clouds near the continuum threshold of dust population in a quasi-neutral dusty plasma

Considering the Boltzmann response of the plasma ions and electrons and inertial dynamics of the charged dust grains, the possibility of very weak compressive soliton near the continuum limit of the dust population has been inferred. It is concluded that the behaviour of such coherent structures could be well described by the numerical analysis of the derived nonlinear classical energy integral equation for bounded solutions. These seem to be higher order dispersive structures within acoustic limit of the nonlinear turbulence. It is observed that the dust density enhancement beyond the continuum threshold causes regular increment in width and amplitude of the soliton structures. It is found that the soliton amplitude sensitively depends on the massive impurity’s population. These coherent structures could be visualized as weakly charged solitary dust clouds of finite extension (∼ plasma Debye length) within Boltzmann environment of plasma particles in their local surroundings. The seeding mechanism of such clouds may be attributed to some plasma instabilities driven by either internal or external free energy sources. Numerical analysis of the problem concludes that the experimental observations of such clouds could be possible in low density plasma regime. It is deduced that for plasma density ∼ 10⁶ cm^-3 at temperatures of a few electron volts and for micron to l0nm sized dust grains, the observation of such structures could be possible within wide range variability of the dust population density.