Aggregation modes of the spin mono-labeled tylopeptin B and heptaibin peptaibiotics in frozen solutions of weak polarity as studied by PELDOR spectroscopy

The X band PELDOR spectroscopy was used to investigate the magnetic dipole-dipole interactions in glassy solutions of nitroxide mono-labeled tylopeptin B and heptaibin peptaibiotics at 77 K. Specifically, a study was performed of the tylopeptin B peptides labeled at either position 3, 8, or 13, denoted as T3, T8, and T13, respectively. The heptaibin analogs labeled at either position 2 or 14, denoted as H2 and H14, respectively, were also investigated. It was shown that in frozen glassy peptide solutions in methanol, the spin labels are randomly distributed over the solvent volume. This result points to the absence of specific dipolar interactions between the peptides under these conditions. However, peptide aggregation was detected in weakly polar methanol/toluene environments. To study the properties of the resulting aggregates, we examined the depth of modulation for the PELDOR traces as a function of the concentration of the peptides in solution and the distances between the spin labels in the aggregates. Based on the concentration dependencies, the number of peptide molecules in the aggregates was estimated. We find that this value ranges from 2 to 3, depending on the position of the spin label in the peptide sequence. The combined analysis of the distance spectra and the number of peptide molecules in the aggregates allows us to suggest that dimer formation is the prevailing mode of self-association. In the case of spin-labeled tylopeptin B, the molecules in the dimer are head-to-head oriented. In addition, the distance spectra of the aggregates show that the C-termini of the molecules in the tylopeptin B dimer are more mobile than the Ntermini. This phenomenon leads to an increase in the spread of the distances between the nitroxides as the label position is approaching the peptide C-terminus. For heptaibin, we show that two forms of dimerization (head-to-head and head-to-tail) occur. Finally, in addition to dimers, aggregates containing 3 or 4 peptide molecules, which give broad lines in the distance spectra, are seen in solution.     

Synthesis and Fungicidal Activity of 5‐Aryl‐1‐(aryloxyacetyl)‐3‐(tert‐butyl or phenyl)‐4‐(1H‐1,2,4‐triazol‐1‐yl)‐4,5‐dihydropyrazole

A series of novel 5‐aryl‐1‐(aryloxyacetyl)‐3‐(tert‐butyl or phenyl)‐4‐(1H‐1,2,4‐triazol‐1‐yl)‐4,5‐dihydropyrazole 3a – 3n were synthesized by the annulation of 2‐aryloxyacetohydrazides with 3‐aryl‐1‐t‐butyl (or phenyl)‐2‐(1H‐1,2,4‐triazol‐1‐yl)prop‐2‐en‐1‐ones ( 2 ) in the presence of a catalytic amount of acetic acid. Compounds 2 were obtained by the Knoevenagel reactions of 1‐t‐butyl (or phenyl)‐2‐(1H‐1,2,4‐triazol‐1‐yl)ethanone ( 1 ) with aromatic aldehydes in the presence of piperidine. Their structures were confirmed by IR, ¹H‐NMR, ESI‐MS, and elemental analyses. The preliminary bioassay indicated that some compounds displayed moderate to excellent fungicidal activity. For example, compounds 3l , 3m , and 3n possessed 100% inhibition against Cercospora arachidicola Hori at the concentration of 50 mg/L.     

Photochemical Synthesis of 5-Ethynyl-5′-(1-Propynyl)-2.2′-Bithiophene

The synthesis of the title compound is described. The key-step is the photochemical coupling between 5-iodo-2-thienylcarbaldehyde and 2-bromothio-phene to give 5-bromo-2,2′-bithienyl-5′-carbaldehyde.     

Microwave‐Assisted Synthesis and Antiprotozoal Activity of Pyridazines Carrying Polyfluoro Substituents

A number of 4,5‐dichloro‐ and 4,5‐dibromopyridazin‐3‐ones and ‐3,6‐diones with polyfluoro substituents at position 2 were obtained in good yields by microwave‐assisted method. The oxopyridazines as well as their respective 5‐dimethylaminoethylamino derivatives were tested for antibacterial, antiviral, and antiprotozoal activity.     

Convenient Access to 4,4-Disubstituted 4H-Chromenes. Synthesis of 4-Methyl-4-(4-methoxyphenyl)-benzo[h]-4H-chromene

4-Methyl-4-(4-methoxyphenyl)-benzo[h]-4H-chromene is synthesised by condensation of 4-methoxyacetophenone and ethyl acetate in strong base, followed by coupling with 1-naphthol, reduction to the epimeric lactols and elimination of water.     

Microwave-assisted oxidation of silibinin: a simple and preparative method for the synthesis of improved radical scavengers

A new and preparative oxidation of silibinin has been developed to give access to two different silibinin derivatives known for their enhanced antioxidant properties. Conventional heating methods were compared with results obtained from microwave (MW) heating. The base-catalysed oxidation of silibinin under MW heating is a very efficient method for the preparation of 2,3-dehydrosilybin and a related silybin rearrangement product. This latter compound shows enhanced radical scavenging properties. Optimised conditions were used to prepare 2,3-dehydrosilybins A and B from optically pure silybins A and B. An efficient, preparative purification method was also developed to enable isolation of different products in high purity.     

Acid–Base Properties, Solubility, Activity Coefficients and Na+ Ion Pair Formation of Complexons in NaCl(aq) at Different Ionic Strengths

The protonation constants and solubilities of three complexons [ethylenediamine-N,N′-disuccinic acid (EDDS), ethylene glycol bis(2-aminoethyl ether)-N,N,N′,N′-tetraacetic acid (EGTA) and 1,2-cyclohexanediamine-N,N,N′,N′-tetraacetic acid (CDTA)] are reported in aqueous solutions of NaCl with different ionic strength values (0 ≤ I ≤ 4.8 mol·L^?1) and, in the case of CDTA, in (CH₃)₄NCl (0.1 ≤ I ≤ 2.7 mol·L^?1). The dependence on ionic strength of the protonation constants of these three complexons and four other complexons that were previously reported (NTA, EDTA, DTPA and TTHA), is analyzed in NaCl solution; the ionic strength influences quite strongly the protonation constants (as an example for CDTA, log₁₀ K ₁ = 10.54 and 9.25 at I = 0.1 and 1 mol·L^?1, respectively), while the effect of (CH₃)₄NCl concentration is lower. Based on the total solubility S ^T and the protonation constant data at different salt concentrations, the solubility of the neutral species S ⁰ and the solubility products K _S0 are obtained. The Setschenow coefficients k _m and the solubility values S ₀ ⁰ in pure water are also reported (S ₀ ⁰  = 0.55, 0.21 and 0.75 mmol·kg^?1 for EDDS, EGTA and CDTA, respectively). The dependence of the protonation constants on ionic strength is also interpreted in terms of ion pair formation, and the formation constants of Na⁺ species are reported.     

Search of truncation of (N−1) electron basis containing full connected triple excitations in computing main and satellite ionization potentials via Fock‐space coupled cluster approach

A valence‐universal multireference coupled cluster (VUMRCC) theory, realized via the eigenvalue independent partitioning (EIP) route, has been implemented with full inclusion of triples excitations for computing and analyzing the entire main and several satellite peaks in the ionization potential spectra of several molecules. The EIP‐VUMRCC method, unlike the traditional VUMRCC theory, allows divergence‐free homing‐in to satellite roots which would otherwise have been plagued by intruders, and is thus numerically more robust to obtain more efficient and dependable computational schemes allowing more extensive use of the approach. The computed ionization potentials (IPs) as a result of truncation of the (N−1) electron basis manifold involving virtual functions such as 2h‐p and 3h‐2p by different energy thresholds varying from 5 to 15 a.u. with 1 a.u. intervals as well as thresholds such as 20, 25, and 30 a.u. have been carefully looked into. Cutoff at around 25 a.u. turns out to be an optimal threshold. Molecules such as C₂H₄ and C₂H₂ (X = D,T), and N₂ and CO (X = D,T,Q) with Dunning's cc‐pVXZ bases have been investigated to determine all main and 2h‐p shake‐up and 3h‐2p double shake‐up satellite IPs. We believe that the present work will pave the way to a wider application of the method by providing main and satellite IPs for some problematic N‐electron closed shell systems. © 2013 Wiley Periodicals, Inc.     

Interfacial Behavior,Structure, and Thermodynamics of Water in Oil Microemulsion Formation in Relation to the Variation of Surfactant Head Group and Cosurfactant

Interfacial behavior, structural, and thermodynamic parameters in relation to the formation of water-in-oil (w/o) microemulsion (μE) with varied surfactant head groups and cosurfactants have been evaluated through dilution technique at different temperature and [water]/[surfactant] mole ratio. Dodecyltrimethylammonium bromide (DTAB), sodium dodecylsulphate (SDS), and polyoxyethylene sorbitan monolaurate (Tween-20) were used as surfactants and n-butanol and n-pentanol were used as cosurfactants. Distribution of cosurfactants between bulk oil and the interface using fixed amount of surfactant at varied [water]/[surfactant] mole ratio and temperature has been studied to evaluate thermodynamic parameters. Associated structural parameters, such as droplet dimension and aggregation number of surfactant and cosurfactant at the droplet interface, have also been evaluated. Spontaneity of the μE formation followed the order DTAB>SDS>Tween-20 for both butanol and pentanol in the studied range of temperature. Correlations of the results in terms of the evaluated physicochemical parameters have been attempted.     

The Influences of Polymers and Temperature on the Foam Properties of 3‐Dodecylalkoxyl‐2‐hydroxylpropyl Trimethylammonium Chloride

The foam performances of 3‐dodecoxy‐2‐hydroxypropyl trimethylammonium chloride (C₁₂TAC) have been determined in the existence of different relative amount of polymer. The experimental results show that the foaming ability of the mixture systems of the C₁₂TAC/PEG and C₁₂TAC/PVP is stronger than that of the surfactant solutions in the absence of polymer, and with the increase of relative amount of polymer both foaming efficiency and foam stability of the surfactant solutions are evidently enhanced. For the aqueous solution of the surfactant, effect of temperature on foaming properties has also been examined. The results show that both the foaming ability and stability of the foams of the surfactant solutions are highest (or strongest) at 30°C.