基于二代curvelet变换的图像融合研究

曲波(Curvelet)作为一种新的多尺度分析方法比小波更加适合分析二维图像中的曲线或直线状边缘特征,而且具有更高的逼近精度和更好的稀疏表达能力.将curvelet变换引入图像融合,能够更好地提取原始图像的特征,为融合图像提供更多的信息.第二代curvelet理论的提出也使得其理论更易理解和实现.因此,提出了一种基于第二代curvelet变换的图像融合方法,首先将图像进行curvelet变换,然后在相应尺度上利用融合规则将curvelet系数融合,最后进行重构得到融合结果.对多聚焦图像进行了实验,采用均方误差、偏差指数和相关系数对融合结果进行了客观评价,并与基于小波变换的融合进行了比较,实验结果表明该方法除分解2层时与小波性能相当,取其他分解层数时均获得更好的融合效果.     

不同波长的散射介质后向散射光偏振度特性

基于Stockes矢量,通过测量以线偏振光和圆偏振光入射时脂肪乳剂后向散射光的偏振度,研究了532nm、650nm和780nm三个波长的光与散射粒子粒径为325nm的脂肪乳剂溶液作用后,其后向散射光的偏振度特性.研究结果表明,对于入射线偏振光,780nm波长后向散射光中的线偏振光成分多于圆偏振光成分,而532nm波长则相反;对于入射圆偏振光,三个波长后向散射光中的圆偏振光成分均多于线偏振光成分;532nm波长的总偏振度高于650nm和780nm两个波长各自的总偏振度;线偏振光的保偏性优于圆偏振光的保偏性,但偏振光在散射介质中的穿透深度较小.因此,后向散射成像技术适用于物体表层成像,而且选择波长略大于粒径的线偏振光可以提高成像质量.     

采用(meta)-GGA泛函对Ag(111)、Rh(111)和Ir(111)上乙烯吸附的理论研究

本文针对在多种催化反应的重要中间体乙烯,使用(meta)-GGA等级的包含PBE,BEEF-vdW,SCAN以及SCAN+rVV10在内的多种交换关联泛函,系统研究了在过渡金属表面(Ag,Rh和Ir)上乙烯吸附势能面对泛函的依赖关系. 研究发现,对于乙烯在贵金属Ag(111)上的吸附,除了PBE外,BEEF-vdW,SCAN以及SCAN+rVV10均能预测出物理吸附态的存在. 对于乙烯在Rh(111)面的吸附,SCAN和SCAN+rVV10预测在化学吸附位之前存在有物理吸附前驱态,而基于PBE和BEEF-vdW的势能面并没有发现前驱态的存在. 而对于乙烯在Ir(111)上的吸附,BEEF-vdW也能微弱地预测出化学吸附前驱态的存在. 研究结果表明,无论在哪一种金属表面上,四种泛函中SCAN+rVV10给出的吸附能最强,其次是SCAN,最后是PBE或者BEEF-vdW.     

Fast multi-planar gradient echo MR imaging: impact of variation in pulse sequence parameters on image quality and artifacts

The purpose of this investigation was to quantitatively evaluate the practical impact of alteration of key imaging parameters on image quality and artifacts in fast multi-planar gradient echo (GRE) pulse sequences. These include multi-planar GRASS (MPGR) and fast multi-planar spoiled GRASS (FMPSPGR). We developed a composite phantom with different T(1) and T(2) values comprising the range of common biological tissues, which was also subjected to periodic motion in order to evaluate motion effects. Magnetic resonance imaging was performed on a GE Signa 1.5-T system. Experimental variations in key parameters included excitation flip angle (FL), echo time (TE), repetition time (TR), and receive bandwidth (BW). Quantitative analysis consisted of signal-to-noise-ratio (SNR) and contrast (CN), image nonuniformity (NU), full-width-at-half-maximum (FWHM) (i.e., blurring or geometric distortion), and ghosting ratio (GR). We found that flip angle, TE, and TR play particularly critical roles in determining image signal, homogeneity, and ghosting artifact with these sequences. Optimum clinical application of these pulse sequences requires careful attention to these imaging parameters and to their complex interactions.     

Chiral selective tunneling induced graphene nanoribbon switch

An armchair graphene nanoribbon switch has been designed based on the principle of the Klein paradox. The resulting switch displays an excellent on-off ratio performance. An anomalous tunneling phenomenon, in which electrons do not pass through the graphene nanoribbon junction even when the conventional resonance condition is satisfied, is observed in our numerical simulations. A selective tunneling rule is proposed to explain this interesting transport behavior based on our analytical results. Based on this selective rule, our switch design can also achieve the confinement of an electron to form a quantum qubit.      

不同LET辐射致DNA集簇性损伤的研究

利用辐照质粒DNA构象变化的分子模型,以DNA糖苷酶Fpg和AP核酸内切酶EndoIII识别并切割辐射所致DNA碱基损伤,将其转换为DNA断裂损伤,通过电泳分析DNA分子构象变化,研究比较γ射线、质子和7Li离子诱发DNA集簇性损伤。50Gy以上高剂量γ辐射对质粒DNA的损伤主要表现为单链断裂(SSB)和很少比例的双链断裂(DSB),并能产生一定水平的集簇性损伤。相比之下,高能质子束和高LET的7Li离子直接所致DNA的断裂损伤以及所产生的集簇性碱基损伤比γ射线的要严重,质子10Gy照射就可诱发明显的集簇损伤。     

基于计算机视觉的蜂窝陶瓷在线检测系统研究

研发了一种基于计算机视觉的蜂窝陶瓷智能在线检测系统;设计了系统的体系结构,4台高速摄像机在线获取蜂窝陶瓷图像,研究了改进型加权中值滤波处理,论述了基于Fisher评价函数的图像阈值分割算法;最后进行亚像素测量,判断产品尺寸是否在允许范围内,实验验证了系统的有效性和检测算法的可行性,可以很好地代替人工检测。     

绝缘衬底上硅表面载流子的超快动力学研究

利用800 nm波长的飞秒抽运探测技术测量r具有不同单晶硅薄膜厚度的绝缘衬底上硅(SOI)皮秒瞬态反射率变化,并通过基于受激载流子密度和温度变化过程建立的反射率模型讨论了SOI表面载流子的超快动力学过程.研究表明,表面复合速度(SRV)是影响载流子动力学响应的主要因素,且薄膜厚度越小表面复合速度就越大,对应的表面态密度可达到1013cm-2 .对于较小的SRV,受激载流子的超快响应决定了瞬念反射率变化;而对于较大的SRV,晶格温升对瞬态反射率变化的贞献变得显著,使得反射率在更短的时间内恢复并超过初始值.     

A Conceptual Model of Somali Jet Based on the Biot--Savart Law

We study the relationship between thermal conditions on the earth bottom boundary and the formation of Somali jet based on the Biot-Savart law and the data from National Centres for Environmental Prediction （NCEP）. As the radiation from the Sun gradually moves from the southern meridian, the temperature on the surface of Somali Peninsular and Arabic Peninsular gradually increases. During the same period the surface temperature of the Northern Indian Ocean increases much slower. It is shown that this increase of the temperature difference between the land and sea is inductive to the formation and development of Rayleigh-Benard convection and leads to the increasing relative vorticity strength between positive and negative vertical vortices over the land and sea. According to the Biot-Savart law, increase of vorticity strength will correspondingly induce the horizontal velocity. A pair of positive and negative vorticity fields over the two Peninsulars and the sea surface is effective in forming and maintaining this current. This mechanism is referred to as the ＇Somali suction pump＇. It draws air continually from the Southern hemisphere and releases it at the coastal area of Somali.