Diheteroarylmethanes. 6.(1) Probing the Electron-Withdrawing Rank of Heteroaryl Groups by Conformational Studies of Push-Pull Ethylenes. Isolation of NH-Enamine Tautomers of alpha,alpha-Diheteroarylacetaldehydes (Heteroaryl = 2-Benzoxazolyl, 2-Benzothiazolyl)

Enamines and enol ethers substituted in the beta position by the 2-benzoxazolyl and 2-benzothiazolyl group have been obtained by condensing dimethylformamide dimethyl acetal and ethyl orthoformate, respectively, with bis(2-benzoxazolyl)methane and bis(2-benzothiazolyl)methane. A dynamic NMR and semiempirical (PM3) investigation on rotational energy barriers has been carried out in order to rank the electron-withdrawing capacity of the heterocyclic rings. The NMR-based evaluation of the energy barriers corresponding to the rotation along the enaminic double bond has shown that the pi-electron-withdrawing power of benzothiazole is larger than that of benzoxazole, in full accord with previously obtained charge demand values based on (13)C and (15)N pi-charge/shift relationships. The NMR and the computational approaches have led to consistent results. The X-ray crystal structure of alpha,alpha-bis(2-benzothiazolyl)-beta-(dimethylamino)ethene shows that only one heteroaryl ring is coplanar with the enaminic double bond, while the second one is twisted by 73 degrees relative to such a plane. Moreover, in this case calculations closely reproduce the experimental results. In the calculated transition states corresponding to the rotational process along the enamine double bond, the two heteroaryl groups become coplanar and conjugation develops between the enaminic nitrogen electron pool and both heterocycles. The lower rotational barrier observed in the case of the 2-benzothiazolyl derivatives, with respect to the 2-benzoxazolyl derivatives, is therefore a direct consequence of the higher electron-withdrawing power of the former group. Furthermore, a stabilizing intramolecular nonbonded S.S interaction in the rotational transition state of the benzothiazolyl derivatives is evidenced by the calculations. An unprecedented isolation of the NH-enamine tautomer involving the benzoxazolyl and benzothiazolyl ring in alpha,alpha-diheteroacetaldehydes has been performed, confirming these heterocycles as strong electron-withdrawing substituents.     

Rapid determination of drugs in biofluids by capillary electrophoresis Measurement of antipyrine in saliva for pharmacokinetic studies

A micellar electrokinetic capillary chromatography method was developed that permitted the resolution of antipyrine from endogenous compounds and its quantitation in neat saliva in as little as 1 min. Final conditions were: SpectraPhoresis 1000, 30(23) cm × 50 μm silica capillary, 50 mM sodium phosphate pH 9.6, 50 mM SDS, 10 s hydrodynamic load, detection scanning 200–300 nm or 260 nm, run 25 kV. To overcome the effects of Joule heating the capillary was cooled to 15°C. Sensitivity was <10 μM and linearity extended to 350 μM. Comparison with an HPLC assay demonstrated that hydrodynamic injection gave a loading bias unless samples and standards were of equal viscosity. For 75 samples from five subjects the correlation of CE vs. HPLC was then r = 0.99.     

Propene polymerization using homogeneous MAO-activated metallocene catalysts: Me2Si(Benz[e]Indenyl)2ZrCl2/MAO vs. Me2Si(2-Me-Benz[e]Indenyl)2ZrCl2/MAO

Propene was polymerized at 40°C and 2-bar propene in toluene using methylalumoxane (MAO) activated rac-Me₂Si(Benz[e]Indenyl)₂ZrCl₂ ( BI ) and rac-Me₂Si(2-Me-Benz[e]Indenyl)₂ZrCl₂ ( MBI ). Catalyst BI /MAO polymerizes propene with high activity to afford low molecular weight polypropylene, whereas MBI /MAO is less active and produces high molecular weight polypropylene. Variation of reaction conditions such as propene concentration, temperature, concentration of catalyst components, and addition of hydrogen reveals that the lower molecular weight polypropylene produced with BI /MAO results from chain transfer to propene monomer following a 2,1-insertion. A large fraction of both metallocene catalyst systems is deactivated upon 2,1-insertion. Such dormant sites can be reactivated by H₂-addition, which affords active metallocene hydrides. This effect of H₂-addition is reflected by a decreasing content of head-to-head enchainment and the formation of polypropylene with n-butyl end groups. Both catalysts show a strong dependence of activity on propene concentration that indicates a formal reaction order of 1.7 with respect to propene. MBI /MAO shows a much higher dependence of the activity on temperature than BI /MAO. At elevated temperatures, MBI /MAO polymerizes propene faster than BI /MAO. © 1995 John Wiley & Sons, Inc.     

Investigation of a stereoselective co-mediated rearrangement reaction

A stereocontrolled approach to alpha-alkyl beta-alkynyl cyclohexanones is reported through a Lewis acid mediated rearrangement reaction of enol ethers bearing an Co-alkyne moiety. The reaction proceeds with high levels of stereoselectivity in the presence of Ti- and B-Lewis acids to provide a range of alpha,beta-disubstituted cyclohexanones in high yield although the products are prone to epimerization at the alpha-position in the presence of the B-promoter system. The potential for an enantioselective variant of this process is outlined, and a rationale for the observed stereochemical trends and detailed structural analyses of the ketone products are described.     

Electrochemically switchable hydrogen-bonded molecular shuttles

A series of [2]rotaxanes containing succinamide and naphthalimide hydrogen-bonding stations for a benzylic amide macrocycle is described. Electrochemical reduction and oxidation of the naphthalimide group alters its ability to form hydrogen bonds to the macrocycle to such a degree that redox processes can be used to switch the relative macrocycle-binding affinities of the two stations in a rotaxane by over 8 orders of magnitude. The structure of the neutral [2]rotaxane in solution is established by (1)H NMR spectroscopy and shows that the macrocycle exhibits remarkable positional integrity for the succinamide station in a variety of solvents. Cyclic voltammetry experiments allow the simultaneous stimulation and observation of a redox-induced dynamic process in the rotaxane which is both reversible and cyclable. Model compounds in which various conformational and co-conformational changes are prohibited demonstrate unequivocally that the redox response is the result of shuttling of the macrocycle between the two stations. At room temperature in tetrahydrofuran the electrochemically induced movement of the macrocycle between the two stations takes approximately 50 micros.     

Carbohydrate-protein interactions at interfaces: synthesis of thiolactosyl glycolipids and design of a working model for surface plasmon resonance

Thiolactosyl lipids designed for carbohydrate-protein binding studies have been synthesised. One representative was selected for binding studies with a plant lectin RCA120, the agglutinin from Ricinus communis. The interactions were measured quantitatively in real time using a BIAcore surface plasmon resonance instrument. Removal of much of the galactose from the thiolactosyl lipid in situ with beta-galactosidase showed that the lectin binding was highly specific. A dissociation constant KD = 8.77 x 10(-8) M was measured for 1-[2-[2-(2-[beta-D-galactopyranosyl-(1-->4)-1-thio-beta-D -glucopyranosyl]ethoxy)ethoxy]ethoxy]octadecane 30 which is four orders of magnitude greater than that determined for binding to lactose in solution. A concentration of lactose of > 80 mM was required to block the lectin binding to thiolactosyl lipid in a neomembrane.     

Dynamic chirality: keen selection in the face of stereochemical diversity in mechanically bonded compounds

The template-directed syntheses, employing bisparaphenylene-[34]crown-10 (BPP34C10), 1,5-dinaphthoparaphenylene-[36]crown-10 (1/5NPPP36C10), and 1,5-dinaphtho-[38]crown-10 (1/5DNP38C10) as templates, of three [2]catenanes, whereby one of the two bipyridinium units in cyclobis(paraquat-p-phenylene) is replaced by a bipicolinium unit, are described. The crude reaction mixtures comprising the [2]catenanes all contain slightly more of the homologous [3]catenanes, wherein a "dimeric" octacationic cyclophane has the crown ether macrocycles encircling the alternating bipyridinium units with the bipicolinium units completely unfettered. X-ray crystallography, performed on all three [2]catenanes and two of the three [3]catenanes reveals co-conformational and stereochemical preferences that are stark and pronounced. Both the [3]catenanes crystallize as mixtures of diastereoisomers on account of the axial chirality associated with the picolinium units in the solid state. Dynamic (1)H NMR spectroscopy is employed to probe in solution the relative energy barriers for rotations by the phenylene and pyridinium rings in the tetracationic cyclophane component of the [2]catenanes. Where there are co-conformational changes that are stereochemically "allowed", crown ether circumrotation and rocking processes are also investigated for the relative rates of their occurrence. The outcome is one whereby the three [2]catenanes containing BPP34C10, 1/5NPPP36C10, and 1/5DNP38C10 exist as one major enantiomeric pair of diastereoisomers amongst two, four, and eight diastereoisomeric pairs of enantiomers, respectively. The diastereoisomerism is a consequence of the presence of axial chirality together with helical and/or planar chirality in the same interlocked molecule. These [2]catenanes constitute a rich reserve of new stereochemical types that might be tapped for their switching and mechanical properties.     

Substrate affinities for membrane transport proteins determined by 13C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy

We have devised methods in which cross-polarization magic-angle spinning (CP-MAS) solid-state NMR is exploited to measure rigorous parameters for binding of (13)C-labeled substrates to membrane transport proteins. The methods were applied to two proteins from Escherichia coli: a nucleoside transporter, NupC, and a glucuronide transporter, GusB. A substantial signal for the binding of methyl [1-(13)C]-beta-d-glucuronide to GusB overexpressed in native membranes was achieved with a sample that contained as little as 20 nmol of GusB protein. The data were fitted to yield a K(D) value of 4.17 mM for the labeled ligand and 0.42 mM for an unlabeled ligand, p-nitrophenyl beta-d-glucuronide, which displaced the labeled compound. CP-MAS was also used to measure binding of [1'-(13)C]uridine to overexpressed NupC. The spectrum of NupC-enriched membranes containing [1'-(13)C]uridine exhibited a large peak from substrate bound to undefined sites other than the transport site, which obscured the signal from substrate bound to NupC. In a novel application of a cross-polarization/polarization-inversion (CPPI) NMR experiment, the signal from undefined binding was eliminated by use of appropriate inversion pulse lengths. By use of CPPI in a titration experiment, a K(D) value of 2.6 mM was determined for uridine bound to NupC. These approaches are broadly applicable to quantifying binding of substrates, inhibitors, drugs, and antibiotics to numerous membrane proteins.     

Novel carbohydrate-appended metal complexes for potential use in molecular imaging

Seven discrete sugar-pendant diamines were complexed to the {M(CO)(3)}(+) ((99m)Tc/Re) core: 1,3-diamino-2-propyl beta-D-glucopyranoside (L(1)), 1,3-diamino-2-propyl beta-D-xylopyranoside (L(2)), 1,3-diamino-2-propyl alpha-D-mannopyranoside (L(3)), 1,3-diamino-2-propyl alpha-D-galactopyranoside (L(4)), 1,3-diamino-2-propyl beta-D-galactopyranoside (L(5)), 1,3-diamino-2-propyl beta-(alpha-D-glucopyranosyl-(1,4)-D-glucopyranoside) (L(6)), and bis(aminomethyl)bis[(beta-D-glucopyranosyloxy)methyl]methane (L(7)). The Re complexes [Re(L(1)-L(7))(Br)(CO)(3)] were characterized by (1)H and (13)C 1D/2D NMR spectroscopy which confirmed the pendant nature of the carbohydrate moieties in solution. Additional characterization was provided by IR spectroscopy, elemental analysis, and mass spectrometry. Two analogues, [Re(L(2))(CO)(3)Br] and [Re(L(3))(CO)(3)Br], were characterized in the solid state by X-ray crystallography and represent the first reported structures of Re organometallic carbohydrate compounds. Conductivity measurements in H(2)O established that the complexes exist as [Re(L(1)-L(7))(H(2)O)(CO)(3)]Br in aqueous conditions. Radiolabelling of L(1)-L(7) with [(99m)Tc(H(2)O)(3)(CO)(3)](+) afforded in high yield compounds of identical character to the Re analogues. The radiolabelled compounds were determined to exhibit high in vitro stability towards ligand exchange in the presence of an excess of either cysteine or histidine over a 24 h period.