Effect of the fibre-forming material structure and silica nanoparticles

The paper discusses the thermal properties of alginate fibres made from alginic acid or sodium alginate and from alginates substituted with divalent metal ions during the fibre-forming stage. Alginate fibres with an addition of silica nanoparticles have also been examined. The selection of fibre-forming parameters was intended to obtain the best either sorption or strength properties depending on the specific fibre application. Thermal curves of the fibres under investigations obtained by under air atmosphere and differential scanning calorimetry (DSC) under neutral gas atmosphere have been interpreted from the view of physical and chemical changes in the fibre-forming material. Based on thermogravimetric curves, the fibre thermal stability indices have been determined. It has been found that the addition of silica nanoparticles exerts a positive influence on the thermal properties of the examined fibres.     

Pyrazoles as molecular probes to study the properties of co-crystals by solid state NMR spectroscopy

Equimolar mixtures of 3,5-dimethylpyrazole (1) with four NH-imidazoles (2–5) have been studied by¹³C and ¹⁵N CPMAS NMR and by DSC. In three cases, the solid mixture behaves as the sum of the individual components [imidazole (2), 2-methylimidazole (3) and 2,4(5)-dimethylimidazole (5)]. In one case [4,5-dimethylimidazole (4)], the mixture corresponds to a new species in which the dynamic behavior of1 no longer exists.     

One-pot sequences of reactions with sol-gel entrapped opposing reagents: an enzyme and metal-complex catalysts

We extend our sol-gel methodology of one-pot sequences of reactions with opposing reagents to an enzyme/metal-complex pair. Sol-gel entrapped lipase and sol-gel entrapped RhCl[P(C(6)H(5))(3)](3) or Rh(2)Co(2)(CO)(12) were used for one-pot esterification and C-C double bond hydrogenation reactions, leading to saturated esters in good yields. When only the enzyme is entrapped, the homogeneous catalysts quench its activity and poison it. Thus, when 10-undecenoic acid and 1-pentanol were subjected in one pot to the entrapped lipase and to homogeneously dissolved RhCl[P(C(6)H(5))(3)](3) under hydrogen pressure, only 7% of the saturated 1-pentyl undecanoate was obtained. The yield jumped 6.5-fold when both the enzyme and the catalyst were immobilized separately in silica sol-gel matrixes. Similar one-pot esterifications and hydrogenations by sol-gel entrapped lipase and heterogenized rhodium complexes were carried out successfully with the saturated nonoic, undecanoic, and lauric acids together with several saturated and unsaturated alcohols. The use of (S)-(-)-2-methylbutanol afforded an optically pure ester. The heterogenized lipase is capable of inducing asymmetry during esterification with a prochiral alcohol. Both the entrapped lipase and the immobilized rhodium catalysts can be recovered simply by filtration and recycled in further runs without loss of catalytic activity.     

Solid-phase synthesis of imidazo[4,5-b]pyridin-2-ones and related urea derivatives by cyclative cleavage of a carbamate linkage

A solid-phase synthesis of substituted cyclic urea derivatives as potential heterocyclic library scaffolds is described. 2-Amino-3-nitropyridine is attached to Wang resin via a carbamate linkage. Reduction of the nitro group was achieved with SnCl(2).2H(2)O. Reductive alkylation with a range of substituted benzaldehydes followed by cyclative cleavage afforded a small library of 3-substituted imidazo[4,5-b]pyridine-2-ones in 33-45% yield and 59-88% purity. Subsequently, this methodology was applied to the synthesis of 3-substituted imidazo[4,5-f]quinolin-2-ones.     

Expanded chemistry of formamidine ureas

[reaction: see text] Formamidine ureas display a rich manifold of reactivity. Thiols induce substitution at the carbonyl carbon to give thiolcarbamates; base-mediated alkylation and acylation occurs at the terminal urea nitrogen, and a new fragmentation/acylation pathway has been uncovered with isocyanates.     

Studies on the Distribution of Phenoxyacetic Acid in Two-Phase Systems: <Emphasis Type="Italic">n</Emphasis>-Aliphatic Hydrocarbon – Water

Summary. Phenoxyacetic acid distribution in two-phase systems n-aliphatic hydrocarbon (C₅–C₈) – water and its dimerization in organic phase were investigated. The values of distribution coefficient (D _HR), distribution constant (K _D), and dimerization constant (K _dim) of acid were obtained. The empirical correlations of these quantities with Hildebrand solubility parameter of organic solvents were established. The influence of pH of the aqueous phase as well as the polarity of the applied organic solvents on phenoxyacetic acid physical chemistry in the two-phase systems was described.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Synthesis and characterization of hybrid borosiloxane gels as precursors for Si–B–O–C fibers

The sol–gel method has been used for the synthesis of borosilicate gels from mixtures of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) and boric acid. The use of boric acid, B(OH)₃ allows the hydrolysis and condensation of hybrid silicon alkoxides without further addition of water or catalyst. The use of difunctional silicon units, –(CH₃)₂SiO– promote the formation, during the sol–gel process, of linear oligomers which facilitate fiber drawing before gelation. Gel characterization performed by FT-IR, XRD, TG-DTA and DCS analysis indicates the formation of a mixed network with incorporation of the boron units via =B-O-Si≡ bridges. The formation of borosiloxane bonds seems favored by the presence of DMDES. SiBOC glasses were obtained after pyrolysis of the borosilicate gels in argon atmosphere at 1000 °C. TG-DTA study indicates that the ceramic yield decreases by increasing the amount of DMDES. Gel fibers were successfully prepared from convenient partially-aged solutions by hand drawing. Pyrolysis of the obtained gel fibers under argon atmosphere at 1000 °C open the possibility to produce SiBOC homogeneous glass fibers with diameter as low as 10 μm.     

Pectin in controlled drug delivery – a review

Controlled drug delivery remains a research focus for public health to enhance patient compliance, drug efficiency and reduce the side effects of drugs. Pectin, an edible plant polysaccharide, has been shown to be useful for the construction of drug delivery systems for specific drug delivery. Several pectin derived formulations have been developed in our laboratory and tested in vitro, ex vivo, and in vivo for the ability to deliver bioactive substances for therapeutic purposes in the context of interactions with living tissues. Pectin derivatives carrying primary amine groups were more mucoadhesive and have shown potential in nasal drug delivery and other mucosal drug delivery. Pectin derivatives with highly esterified galacturonic acid residues are more hydrophobic and able to sustain the release of incorporated fragrances for a prolonged duration. Less esterified pectin derivatives are able to penetrate deeper into the skin and may be useful in aromatherapy formulations. Pectin, in combination with zein, a corn protein, forms hydrogel beads. The bound zein restricts bead swelling and retains the porosity of the beads; the pectin networks shield the zein from protease attack. The complex beads are ideal vehicles for colon-specific drug delivery. Studies presented in this paper indicate the flexibility and possibility to tailor pectin macromolecules into a variety of drug delivery systems to meet different clinical requirements. Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the US Department of Agriculture.     

Mapping of possible prion protein self-interaction domains using peptide arrays

Background  

The common event in transmissible spongiform encephalopathies (TSEs) or prion diseases is the conversion of host-encoded protease sensitive cellular prion protein (PrP^C) into strain dependent isoforms of scrapie associated protease resistant isoform (PrP^Sc) of prion protein (PrP). These processes are determined by similarities as well as strain dependent variations in the PrP structure. Selective self-interaction between PrP molecules is the most probable basis for initiation of these processes, potentially influenced by chaperone molecules, however the mechanisms behind these processes are far from understood. We previously determined that polymorphisms do not affect initial PrP^C to PrP^Sc binding but rather modulate a subsequent step in the conversion process. Determining possible sites of self-interaction could elucidate which amino acid(s) or amino acid sequences contribute to binding and further conversion into other isoforms. To this end, ovine – and bovine PrP peptide-arrays consisting of 15-mer overlapping peptides were probed with recombinant sheep PrP^C fused to maltose binding protein (MBP-PrP).