syn-2,3-Disubstituted-2,3-dihydro-1,4-benzoxathiin rings: preparation from quinone ketals and 2-mercaptoethanols

A general method for the preparation of syn-2,3-disubstituted-2,3-dihydro-1,4-benzoxathiin rings from 2-mercaptoethanols and quinone ketals is presented. This ring system is produced by Michael addition of a 2-mercaptoethanol to a quinone ketal, followed by cyclization of the initial Michael adduct, and subsequent aromatization to afford a syn-2,3-disubstituted-1,4-benzoxathiin in fair to good chemical yield. Several chiral syn-2,3-disubstituted-2,3-dihydro-1,4-benzoxathiin rings were prepared with this method from enantioenriched 2-mercaptoethanols. No loss of enantiopurity was observed.     

Reactions of Molecules with Two Equivalent Functional Groups. 5. Anomalous Reactivity of 1,10-Cyclooctadecanedione. Crystal and Molecular Structures of cis,cis-1,10-Diphenyl-1,10-cyclooctadiene and the Stereoisomers of 1,10-Diphenyl-1,10-cyclooctadecanediol(1)

The reaction of the title diketone (3) with phenyl Grignard produces (with rate constant k(1)) the conjugate base (6-M) of 10-hydroxy-10-phenylcyclooctadecanone (6), which is subsequently converted (with rate constant k(2)) to the conjugate base of the title diol, as a mixture of the cis (7, 55%) and trans (8, 45%) isomers. The ratio k(2)/k(1), 2.2 +/- 0.4, indicates that the carbonyl group in 6-M is 4.4 times as reactive as each carbonyl in 3. Competition experiments further demonstrate that the relative rates (per carbonyl) for addition of phenylmagnesium bromide to 3, 10-methylenecyclooctadecanone (11), and cyclopentadecanone (12) are 1.0:0.60:1.92. Possible reasons for this order of reactivity are discussed. Diols 7 and 8 undergo facile double dehydration to form the title diene 13, which is predicted by molecular mechanics calculations to be the most stable of the four possible symmetrical diene isomers. The structures of 7, 8, and 13 were secured by single-crystal X-ray studies.     

Potentiometric measurements of the first hydrolysis quotient of magnesium(II) to 250°C and 5 molal ionic strength (NaCl)

The first molal hydrolysis quotient, Q_1.1, of Mg²⁺ was measured potentiometrically from 1 to 250°C at ionic strengths of 0.11, 0.31, 1.01, and 5.0 mol-kg^-1 in an aqueous NaCl medium using a hydrogen-electrode, concentration cell. Only hydrolysis of the first four percent of the magnesium in solution could be followed before precipitation of brucite, Mg(OH)₂(cr), occurred. The log Q_1.1 values were fitted as a function of temperature and ionic strength using four adjustable parameters. The resulting constants are compared with the limited existing low temperature data. At infinite dilution and 25°C the following quantities are reported: logK _1.1 = -11.68±0.05, †H_so = 70.1±1.2 kJ-mol^-1, †S^o = 11±4 J-K^-1-mol^-1, and †C _p ^o = 0 J-K^-1-mor^-1. At each ionic strength, including the values extrapolated to infinite dilution, the heat capacity change for the hydrolysis reaction was zero,i.e., logQ _1.1 was found to be a linear function of the reciprocal temperature in Kelvin, at least over the measured range of l-250°C. The hydrolysis constants at infinite dilution were modeled to 550°C and two kbar pressure with a function incorporating solvent density using published results obtained at these extreme conditions.     

A new method for the direct calculation of resonance parameters with application to the quasibound states of the H2X1Σ g + system

A new method for the direct calculation of resonance parameters is presented. It is based upon searching for poles of the scattering matrix at complex energies. This search is expedited by the use of analytic derivatives of the scattering matrix with respect to the total energy. This procedure is applied initially to a single channel problem, but is generalizable to more complicated systems. Using the most accurate available potential energy data, we calculate resonance parameters for all of the physically important quasibound states of the ground electronic state of the hydrogen molecule. Corrections to the Born-Oppenheimer potential are included and assessed. The new method has no difficulty locating resonances with widths greater than about 1×10^–7 cm^–1. It is easier to find narrow resonances by monitoring the dependence of the imaginary part of the reactance matrix on the real part of a complex energy than to monitor the dependence of the eigenphase sum on energy at real energies.     

Synthesis of pyridone and pyridine rings by [4+2] hetero-cyclocondensation

Substituted pyridones and pyridines have been synthesised efficiently by employing iminium salt as a key precursor. These compounds were prepared using tandem [4+2] cycloaddition/deamination between azabutadiene and dienophiles.     

Rapid biomass analysis

New, rapid, and inexpensive methods that monitor the chemical composition of corn stover and corn stover-derived samples are a key element to enabling the commercialization of processes that convert stover to fuels and chemicals. These new techniques combine near infrared (NIR) spectroscopy and projection to latent structures (PLS) multivariate analysis to allow the compositional analysis of hundreds of samples in 1 d at a cost of about $10 each. The new NIR/PLS rapid analysis methods can also be used to support a variety of research projects that would have been too costly to pursue by traditional methods.     

Solvent Effects on the Absorption Spectrum of the Product and the Equilibrium Constant for the Proton Transfer Reaction from 1-Phenacylquinolinium Bromide to Amines

The equilibrium constants, K ₂, have been determined for the proton-transfer reactions of 1-phenacylquinolinium ion, PHQ⁺, with several amines {triethylamine (TEA), N,N,N′,N′-tetramethylethylenediamine (ED), N,N,N′, N′-tetramethylpropanediamine (PD), N,N,N′,N′-tetramethylbutanediamine (BD), and 1,8-bis(dimethylamino-naphthalene (DMAN)} in acetonitrile (AN), AN-tetrahydrofuran (THF) and AN-ethanol (EtOH) mixtures. The reaction was followed spectrophotometrically using a stopped-flow technique. The K ₂ value decreased for DMAN and increased for TEA with increasing vol-% of THF in AN-THF mixtures. The changes in the K ₂ value for ED, PD and BD changed in the order: ED, PD and BD from a pattern similar to TEA to a pattern similar to DMAN. The change in the K ₂ value for DMAN with increasing vol-% of THF in AN-THF mixtures was explained by the effect of polarity on the stability of P⁻Q⁺ (the deprotonated product of PHQ⁺). The effect of THF on the K ₂ value is consistent with that of the peak wavelength of the absorption spectrum of P⁻Q⁺. The change in the K ₂ value for TEA, ED, PD and BD depended on the structures of the protonated bases, one of the products for this reaction. The effect of EtOH on the K ₂ value for DMAN was examined in ternary EtOH-THF-AN mixtures that contain different amounts of EtOH and whose relative permittivities were adjusted to that of EtOH. The K ₂ value increased with increasing vol-% of EtOH because of the stabilization of P⁻Q⁺ upon the formation of the hydrogen-bonded complex with EtOH. The absorption spectrum of P⁻Q⁺ demonstrated a blue shift as the vol-% of EtOH increased.     

Double hexagonal chains with minimal total <Emphasis Type="Italic">π</Emphasis>-electron energy

The total energy of all π-electrons in a conjugated hydrocarbon (within the framework of HMO approximation) is the sum of the absolute value of all the eigenvalues of its corresponding graph. In this paper, we consider “double hexagonal chains” as benzenoids constructed by successive fusions of successive naphthalenes along a zig–zag sequence of triples of edges as appear on opposite sides of each naphthalene unit. It is shown that if the fusions are such as to give a polyaceacene then the total π-electron energy is the minimum from among all the double hexagonal chains with the same number of naphthalene units.      

Diode or tunnel-diode characteristics? Resolving the catalytic consequences of proton coupled electron transfer in a multi-centered oxidoreductase

Protein film voltammetry has been employed to define multiple catalytic consequences of proton coupled electron transfer (PCET) in a cytochrome c nitrite reductase. Current-potential profiles reflecting the steady-state rate of nitrite-limited reduction have been defined from pH 4 to 8. Lowering the electrode potential at pH 8 causes the catalytic current to increase and then decrease before it takes a value independent of any further lowering of electrode potential. By comparison, at pH 4, catalysis is initiated at more positive electrode potentials in an approximately sigmoidal fashion with no attenuation of the catalytic rate evident at more negative electrode potentials. The results show that activity is turned on by the coupled transfer of two electrons and one proton to the enzyme. The decreased rate of catalysis at lower electrode potentials under more alkaline conditions shows that this rate attenuation occurs only when reduction is not coupled to compensating protonation(s) of the enzyme. Sites within the enzyme whose reduction and/or protonation may contribute to the definition of these activities are discussed.     

Synthesis and characterization of polymers produced by horseradish peroxidase in dioxane

Polymers were synthesized from substituted phenolic and aromatic amine compounds with hydrogen peroxide as the source of an oxidizing agent and horseradish peroxidase enzyme as the catalyst. The polymerization reaction was carried out in a monophasic organic solvent with small amounts of water at room temperature. Conditions for the synthesis of polymers with respect to reaction time and yield were studied with a number of monomers at different concentrations and in solvents with different buffers with pH range of 5.0–7.5. Physical and chemical properties of these homo-and copolymers were determined with respect to melting point, solubility, elemental analysis, molecular weight distribution, infrared absorption (including FTIR), solid-state ¹³C nuclear magnetic resonance, thermal gravimetric analysis, and differential scanning calorimetry. The enzyme catalyzed reactions produced polymers of molecular weight greater than 400,000 which were further fractionated by differential solubility in solvent mixtures and the molecular weight distribution of the polymer fractions were determined. In general, the polymers synthesized have low solubilities, high melting points, and some degree of branching.