Glucose Electro‐oxidation on Graphite Electrode Modified with Nickel/Chromium Nanoparticles

In this study, an available and inexpensive graphite substrate, was easily modified with Ni/Cr nanoparticles via electrodeposition technique in a very short time (3 min) and used as an electrocatalyst for glucose oxidation in alkaline solution. Graphite electrode modified with Ni/Cr nanoparticles demonstrated an outstanding electrocatalytic performance to glucose oxidation in comparison to examined Ni‐based electrodes or even different materials in other reports. It is noteworthy to mention that adding a little Cr led to a synergistic effect with Ni; accordingly, the presence of Cr not only resulted in a greater adsorption of glucose molecules by chromium oxide but also boosted conductivity of the nickel oxide because of the enhancement of Ni(III) amount. The electrochemical studies were performed by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The morphology and structure of catalyst layer was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and energy dispersive x‐ray spectroscopy (EDS). The linear range of the electrode by cyclic voltammetry was between 2–31 mM with a high sensitivity of 2094 μA cm^?2 mM^?1. The repeatability and reproducibility of the proposed electrode was examined in glucose solution which were 0.3 % and 4.7 %, respectively. According to the low cost, ease and fast preparation, good repeatability and high sensitivity, this electrode can be a good candidate for nonenzymatic glucose oxidation.     

Biosurfactant production under extreme environmental conditions by an efficient microbial consortium, ERCPPI-2

The biosurfactant production potential of a new microbial consortium of Enterobacter cloacae and Pseudomonas sp. (ERCPPI-2) which was isolated from heavy crude oil-contaminated soil in the south of Iran, has been investigated under extreme environmental conditions. The isolated consortium produces a biosurfactant mixture with excessive oil spreading and emulsification properties. This consortium was able to grow and produce biosurfactant at temperatures up to 70 °C, pressures up to 6000 psia, salinities up to 15% (w/v), and in the pH range 4-10. Besides, the optimum biosurfactant production conditions were found to be 40 °C and 7.0 for the temperature and pH value, respectively. These conditions gave the best biosurfactant production of 1.74 g/1 when the cells were grown on a minimal salt medium containing 1.0% (w/v) olive oil, 1.0% (w/v) sodium nitrate supplemented with 1.39% (w/v) K(2)HPO(4) at 40 °C and 150 rpm after 48 h of incubation. The ERCPPI-2 could reduce surface and interfacial tensions to 31.7 and 0.65 mN/m from the original values of 58.3 and 16.9 mN/m, respectively. The isolated consortium produced biosurfactant using heavy crude oil as the sole source of carbon and emulsified the available heavy crude oil up to E(24)=83.4%. The results of the core holder flooding tests at simulated reservoir conditions demonstrated that the oil recovery efficiency due to the injection of the cell-free biosurfactant solution was 27.2%, and the bacterium injection reduced the final residual oil saturations to below 3% at optimum conditions.     

Application of elastically supported single-walled carbon nanotubes for sensing arbitrarily attached nano-objects

The potential application of SWCNTs as mass nanosensors is examined for a wide range of boundary conditions. The SWCNT is modeled via nonlocal Rayleigh, Timoshenko, and higher-order beam theories. The added nano-objects are considered as rigid solids, which are attached to the SWCNT. The mass weight and rotary inertial effects of such nanoparticles are appropriately incorporated into the nonlocal equations of motion of each model. The discrete governing equation pertinent to each model is obtained using an effective meshless technique. The key factor in design of a mass nanosensor is to determine the amount of frequency shift due to the added nanoparticles. Through an inclusive parametric study, the roles of slenderness ratio of the SWCNT, small-scale parameter, mass weight, number of the attached nanoparticles, and the boundary conditions of the SWCNT on the frequency shift ratio of the first flexural vibration mode of the SWCNT as a mass sensor are also discussed.     

Synthesis of Novel and Thermally Stable Water Insoluble Coumarin‐based Azo Dyes via a Mild and Green Procedure

A series of novel azo coumarin dyes were synthesized by the diazotization of 7‐amino coumarins in the presence of catalytic amounts of tungstate sulfuric acid (TSA) followed by coupling with phenol derivatives. Tungstate sulfuric acid catalyzes this reaction at room temperature and short reaction time with high yields.     

Overhauser DNP and EPR in a Mobile Setup: Influence of Magnetic Field Inhomogeneity

Power-dependent Overhauser dynamic nuclear polarization (DNP) enhancements and continuous-wave electron paramagnetic resonance (EPR) spectra of nitroxide radicals were measured in the magnetic field of a mobile Halbach-array permanent magnet and compared with results from a commercially available electromagnet. DNP saturation factors for varying microwave power were obtained from both measurement series and used to investigate how the increased magnetic field inhomogeneity present in the Halbach magnet affects the saturation efficiency. An EPR detection system was designed to allow continuous-wave EPR measurements at microwave power up to 20?W. Our results show that despite the lower magnetic field homogeneity, a Halbach-array magnet can be used for EPR and DNP-enhanced nuclear magnetic resonance of high quality providing almost the same performance as a more homogeneous electromagnet.     

Viscometric Analysis of Miscibility and Interactions for Binary,Ternary Polycarbonate/Brominated Polystyrene + Chloroform Systems at Different Temperatures

Viscosities of ternary systems consist of polycarbonate (PC)/brominated polystyrene (PBrS) in chloroform and their corresponding binary systems were measured at different temperatures (20, 25, and 30°C). All the measurements were carried out at the concentration ranges of 0.1–0.6 g·dL^?1. The mass ratio of PC to PBrS was selected as 75:25, 50:50, and 25:75 in the ternary solutions. Two empirical expressions of Huggins and Kraemer equations with three-parameters were used for reproducing of the experimental viscosity data. The fitting parameters were obtained for the corresponding temperatures. The miscibility criteria on the basis of the sign of Δ[η]_m based on the difference between experimental and ideal values of [η]_m, was calculated by applying the Garcia et al., theoretical equation. The effect of temperature on the viscosity data was also studied. The results from this method were correlated with the miscibility data obtained for the same system by differential scanning calorimeter (DSC) findings.     

Study of the oxidation of some catechols in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole by digital simulation of cyclic voltammograms

Electrochemical oxidation of catechol and its derivatives ( 1a–d ) has been studied in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole ( 3 ) at various pHs. Some electrochemical techniques such as cyclic voltammetry using the diagnostic criteria derived by Nicholson and Shain for various electrode mechanisms and controlled‐potential coulometry were used. Results indicate the participation of catechols ( 1a–d ) with 3 in an intramolecular cyclization reaction to form the corresponding 1,2,4‐triazino[5,4‐b]‐1,3,4‐thiadiazine derivatives. In various scan rates, based on an electron transfer–chemical reaction–electron transfer–chemical reaction mechanism, the observed homogeneous rate constants (k_obs) for Michael addition reaction were estimated by comparing the experimental cyclic voltammetric responses with the digital simulated results. The oxidation reaction mechanism of catechols ( 1a–d ) in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole ( 3 ) was also studied. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 340–345, 2007     

Reactivity of N-nitrosoamides in confined spaces

The thermal rearrangement of several N-nitrosoamides was studied by ¹H NMR in the context of reversible encapsulation. The N-nitrosoamide guests were isolated from the bulk solvent in a hydrogen-bonded dimeric host capsule which prevented their rearrangement. The guests appear to be preserved in their ground state conformations by the pressure exerted by the host. The conformations of the free and bound N-nitrosoamides are of comparable relative energies as determined by DFT calculations.     

Formation of a mesoscopic skin barrier in mesoglobules of thermoresponsive polymers

With the combination of molecular scale information from electron paramagnetic resonance (EPR) spectroscopy and meso-/macroscopic information from various other characterization techniques, the formation of mesoglobules of thermoresponsive dendronized polymers is explained. Apparent differences in the EPR spectra in dependence of the heating rate, the chemical nature of the dendritic substructure of the polymer, and the concentration are interpreted to be caused by the formation of a dense polymeric layer at the periphery of the mesoglobule. This skin barrier is formed in a narrow temperature range of ~4 K above T(C) and prohibits the release of molecules that are incorporated in the polymer aggregate. In large mesoglobules, formed at low heating rates and at high polymer concentrations, a considerable amount of water is entrapped that microphase-separates from the collapsed polymer chains at high temperatures. This results in the aggregates possessing an aqueous core and a corona consisting of collapsed polymer chains. A fast heating rate, a low polymer concentration, and hydrophobic subunits in the dendritic polymer side chains make the entrapment of water less favorable and lead to a higher degree of vitrification. This may bear consequences for the design and use of thermoresponsive polymeric systems in the fast growing field of drug delivery.